Careless Posted July 27, 2009 Share Posted July 27, 2009 how about a push fan versus a pull fan? pusher fan for the win! Quote Link to comment Share on other sites More sharing options...
rustrocket Posted July 27, 2009 Author Share Posted July 27, 2009 But i have even less room on the front of the radiator for a pusher fan. If it were that easy, i would've done that already Quote Link to comment Share on other sites More sharing options...
Dan Juday Posted July 27, 2009 Share Posted July 27, 2009 This is a little wagon, right? You've got all that room in the back. Do like a Pantara and mount your radiator in the tail. It's going to take some creative plumbing, but the results should peg the cool meter. Quote Link to comment Share on other sites More sharing options...
heavy85 Posted July 29, 2009 Share Posted July 29, 2009 Cameron -I have 21 3/4" between the framerails and can't go higher than 19. How big is the camaro unit? -Cameron Yep it wont work then. Camaro radiator is ~27.5" wide and 19" tall. Quote Link to comment Share on other sites More sharing options...
judas_light Posted July 29, 2009 Share Posted July 29, 2009 Could you mount the radiator so that it's leaning forward? Like get a fabricator to redo your radiator mount? Quote Link to comment Share on other sites More sharing options...
m4xwellmurd3r Posted July 29, 2009 Share Posted July 29, 2009 lol he IS the fabricator. and if you saw, you can't move that radiator at all. it's already pressed against the body Quote Link to comment Share on other sites More sharing options...
Mike Mileski Posted July 29, 2009 Share Posted July 29, 2009 Dan Juday wrote: This is a little wagon, right? You've got all that room in the back. Do like a Pantara and mount your radiator in the tail. It's going to take some creative plumbing, but the results should peg the cool meter. Panteras have the radiator in the front. It's the air conditioning condenser in the back. Mike Mileski Tucson, AZ Quote Link to comment Share on other sites More sharing options...
rustrocket Posted July 29, 2009 Author Share Posted July 29, 2009 I did some of the fabrication, but a friend did all the mounts and whatnot. At this point,it's easier to some custom adapters and run the remote pump than it would be to move the entire engine/transmission back. If nothing else, it'll make the project even more unique... Quote Link to comment Share on other sites More sharing options...
jyz77 Posted July 29, 2009 Share Posted July 29, 2009 your best bet with a puller will be the flex a lite fans that are usually ran on honda apps. http://www.streetperformance.com/part/flex-a-lite/fan-electric/46482-125.html good luck! Quote Link to comment Share on other sites More sharing options...
zgeezer Posted July 29, 2009 Share Posted July 29, 2009 My buddy said he'll start machining my billet blocks this week. Sweet. Try this link to a radiator mounted electric water pump. Very neat and sold in the USA. http://www.meziere.com/displaycategory.aspx?id=244,381 g Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.