dangerboy Posted June 13, 2010 Share Posted June 13, 2010 yes keep the updates coming. Quote Link to comment Share on other sites More sharing options...
Shnipplelicken Posted June 22, 2010 Author Share Posted June 22, 2010 UGHHH!!!!! THE RUST NEVER ENDS!!! Quote Link to comment Share on other sites More sharing options...
Shnipplelicken Posted July 6, 2010 Author Share Posted July 6, 2010 Well, between being up in the mountains with the new girlfriend for a week, school, work, and the tempurature bouncing around 95 degrees, I havent been to motivated to do anything lately. But, I finally got back into the groove. So, here's what I've done in that last two days. Quote Link to comment Share on other sites More sharing options...
Shnipplelicken Posted July 9, 2010 Author Share Posted July 9, 2010 Just a little heads up; I have Techno Toy Tuning front lower control arms with new ball joints, the TTT tension rods, steering rack boots, and tie rods on the way. Pics coming as soon as I get them installed. Quote Link to comment Share on other sites More sharing options...
Shnipplelicken Posted July 11, 2010 Author Share Posted July 11, 2010 I almost have a frame rail. Just a few more hours during the week and begin welding next weekend. Quote Link to comment Share on other sites More sharing options...
Shnipplelicken Posted July 15, 2010 Author Share Posted July 15, 2010 slowly getting there. Just painted it to keep the morning dew from rusting my masterpiece lol. Quote Link to comment Share on other sites More sharing options...
Shnipplelicken Posted July 17, 2010 Author Share Posted July 17, 2010 I had to modify the engine crossmember to make up for the width difference between the old/stock frame rails and the new frame rails Quote Link to comment Share on other sites More sharing options...
Shnipplelicken Posted August 2, 2010 Author Share Posted August 2, 2010 (edited) Edited August 5, 2010 by Shnipplelicken Quote Link to comment Share on other sites More sharing options...
Shnipplelicken Posted August 14, 2010 Author Share Posted August 14, 2010 (edited) started wiring in the Painless fuse box, installed a pointless Bomz spoiler, and installed the intercooler. More pics coming tomorrow probably. Edited August 14, 2010 by Shnipplelicken Quote Link to comment Share on other sites More sharing options...
Shnipplelicken Posted September 7, 2010 Author Share Posted September 7, 2010 I've been bojangling big time, but I've finally got a new fuel rail, Siemen Deka 850cc high-impedance injectors and I finally got around to fabricating a trans mount. IMO, it looks a bit weak, but I guess I can always make a stronger one later. I've wired up the headlights, tail lights, front and rear turn signals. Im going to be working on the floorpans and finishing the ignition wiring. It will buy me some time to save up some money for a driveshaft and gauges. Quote Link to comment Share on other sites More sharing options...
copperdatsun76 Posted September 12, 2010 Share Posted September 12, 2010 please remove the spoiler Quote Link to comment Share on other sites More sharing options...
Steveoen Posted September 13, 2010 Share Posted September 13, 2010 please remove the spoiler agreed removal of the spoiler is your next step Quote Link to comment Share on other sites More sharing options...
aplyedmind Posted September 13, 2010 Share Posted September 13, 2010 The spoiler doesn't look bad at all Quote Link to comment Share on other sites More sharing options...
19762802+2 Posted September 13, 2010 Share Posted September 13, 2010 The spoiler doesn't look bad at all I agree, It's his build at least he isn't slamming it and increasing the camber. Quote Link to comment Share on other sites More sharing options...
gtikyle Posted November 8, 2010 Share Posted November 8, 2010 Updates? Quote Link to comment Share on other sites More sharing options...
Shnipplelicken Posted May 4, 2011 Author Share Posted May 4, 2011 quick update. Havent been working on the car in a loooong while. New job. Moved to North Carolina. Car still sitting in Maryland until early June. Quote Link to comment Share on other sites More sharing options...
wolfsburgedition Posted June 2, 2011 Share Posted June 2, 2011 Looks like you are doing a nice job. What kind (and size) are those wheels? Quote Link to comment Share on other sites More sharing options...
Megatron Posted August 14, 2011 Share Posted August 14, 2011 Updates? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.