Jump to content


gnosez

Member Since 16 May 2002
Offline Last Active 4 days ago
-----

Topics I've Started

Quarter Master 5.5 Clutch and Flywheel

08 March 2017 - 12:30 PM

Installed but never used, a Quarter Master L-Series 5.5 inch clutch and flywheel package complete with starter ring, release bearing and bolts.

 

I paid $1,172 (shipping and tax) and am selling the package for $950 which includes shipping.

 

Email me at: john@baddogparts.com


Performance TB and other parts

08 March 2017 - 11:41 AM

I have the following parts for sale:

 

1) Performance 65mm TB with intake tube and K&N filter (MSA 11-3021/11-2021 $490) asking $400.

 

2) 280Z rebuilt MAF (Fuel Injection Corp 415001 $265) asking $215

 

3) 1972-83 fan clutch (MSA 16-7031 $93) asking $75

 

4) EBC front pads (V6 Toyo DP4807R $145) asking $110

 

Prices include shipping.

 

Email me direct at:  john@baddogparts.com

 

 


720 Pickup Diff Set-up

18 July 2016 - 03:05 AM

Is there anything different or unique in the installation of a LSD unit into one of the front mounted R180 diffs that came in a 720 pick-up?


BSR Header & Collectors

04 January 2016 - 05:39 PM

Not very pretty but here is the header Z-Ya and I got with the rest of Bob Sharp Racing parts a few years back. The header studs on #1 & #6 are too big so they are hanging there just for the picture.

Two 3 pipe collectors with tabs and springs funnel the flow back to the dual trumpets in the rear.

 

It looks more like a prototype than one that was actually used. The welding in some places seems to have been done with old wire coat hangers on very thin metal using a bunch of truck batteries. I have to ask JR Mitchell if this was made at the track in an attempt to get the car back up and running.

 

The #5 will hit the steering shaft if you haven't altered the engine mounts to move it over about 3/4-inch to the right. That helps put some weigh over to the right front tire as well.


4:38 R180 open diff

20 July 2015 - 01:01 PM

Looking for an R180 open 4:38 diff (marked with a K on the top of the case).

 

I will be replacing all the bearings and seals so that is not a concern.

 

Shipping will be to 01730.

 

Email to: john@baddogparts.com