Kennysgreen280zt
-
Posts
582 -
Joined
-
Last visited
-
Days Won
2
Content Type
Profiles
Forums
Blogs
Events
Gallery
Downloads
Store
Posts posted by Kennysgreen280zt
-
-
My old work had a matsuura like that, cept it was dual spindle. Im currently running a little Fadal.
-
Looks like it needs some flares
-
Im a fan of the golf-b-q hahaha
-
There is a similar kit, attached to a car, that shows up on craigslist seattle every once in a while.
-
too bad its so far, that could be sorta cool
-
Cosworth vega
How do you get that much crud? That puts BRAAP and RonTyler both to shame by far...And what engine is this? Chevy and Cosworth?:
and you thought airjockie had a lot of rims...LOL
-
very cool, I was looking in that direction myself. black on black is my first choice as well!
-
-
go check out http://www.hidplanet.com and read untill your eyes bleed
its a pretty knowlagable, tight run, forum much like ours. -
$18 shipping!!! yikes hahahaha. thats kinda funny. you should put that you could use some resin and make a kick ass 1990s table (with the old AOL CD's) I saw it on pimp my ride.... but with vinyl
-
thanks kenny, did u sell ur rb yet?
nah, im keeping it around untill you blow yours up
-
fastest RB swap ever
good to hear man!! -
There is a guy on http://www.northwestnissans.com that has a clip for sale. He cant seem to answer whether its a GTR clip or not, so its prob a dead end.... here is the thread http://www.northwestnissans.com/board/showthread.php?t=57919
-
looks pretty freakin good and sounds good too!
-
I was working on a project to run the 993 TT rotor and the 996/boxter S monobloc caliper. I abonded the project along with a few other things on my car, but that is beside the point. There is enough room to run the rotor and caliper on the Z spindle. The hat I used to test fit was from a friend's Pcar kit for his audi. here are all the pics I took. I was planning on running the z31 5 lug hubs. I have a feeling with the hat ive got, and standard hubs, things would get close.
The rotors are 322x28 IIRC. This set of calipers has to have the pad centering pins clearanced 1mm on each side to clear the rotor. It doesnt hurt the caliper at all. This setup was going to fit barely behind starion 16" wheels.
This type of kit is very popular among the VW/Audi crowd. Rotors are $215 each on the net, and the pair of calipers usually sell for around $400.
Anyways, I hope that info helps someone along the way
-
The bolt pattern is different. Your best off with a SOHC (KA24e) non cruise control throttle body. It can be from a 240, stanza, or quest van. If you wanted to, you could also use the one from a G20 (sr20de) since you only need the potentiometer part of the TPS.
-
stupid tivo didnt pick it up on fox!!
-
you can just send it to me for 'research' =)
-
please email me at fiestaboy80@hotmail.com Ive got one. Thanks
-
wow, that would be an interesting ride.
-
Does the LD28 Bolt to a 4/5 speed datsun tranny? or does the swap also take the maxima tranny also?
Yeah, transmissions will bolt up. Z flywheels will bolt up. The oilpan is front sump rather than rear sump like the Z.
-
240sx throttle body is 60mm.... Q45 is 90mm
-
the minimum wage in washington state is already $7.93, you know to go along with our higher than average gas prices and high housing costs.
-
make sure to check the FPR too, the 280zx I just picked up was @ 80psi which was the reason it was running rich.
good to hear man!!
Make some MONEY at the local Pull & Save!!!
in Non Tech Board
Posted
Some of those are high from what I have seen and sold. A few are low as well. Though we are in different locations of the country, so that could have something to do with it.