justin260z
-
Posts
42 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Events
Gallery
Downloads
Store
Everything posted by justin260z
-
Updates?? -
I know! Every time I get an email about this thread having a new post, I get so excited!
-
Updates??
-
I like it very much! That is the bumper I was going to get before I trades my 260z for a 280zxt, lol. Do you plan to make some sort of air guide from the bumper opening to the lower rad. support? Ive seen it done before with regular air dams.
-
vorex generators and lift
justin260z replied to DrEaM's topic in Windtunnel Test Results and Analysis
Is there any affect if the vg's are installed on a car with no spoiler? -
I just got a 1982 280zx turbo. Just yesterday the turbo started making a slow squeaking niose at idle. It has ~15 oil psi at idle. The guy before me used pennziol 10w50 non synthetic oil. Am i going to have to replace/rebuild the turbo, or can i fix the problem by changing the oil, and adding some sort of oil additive like pro-long? I have no previous experience with turbos so any advice is welcome. -Justin
-
That looks really nice. But I think the stitching around the corners looks better imo.
-
That reminds me of some of the Lamborghini dashes.....super exotic and classy
-
Sportmax002 wheels - they fit!
justin260z replied to bubbleguinea's topic in Brakes, Wheels, Suspension and Chassis
and me, damn they look sexy! Good taste! -
My Project: 800HP (Crank) RB26DETT 1998 240SX
justin260z replied to underground's topic in Nissan RB Forum
is e85 really 2.18 a gallon? why so cheap? we have 112 octane here in OK, and it it 6.00 a gallon at the track. -
My combonation is a l28 block with the dished pistons, and a l26 e88 head (came off my old blown up l26). n/a I torqued everything exactly how it says in the book. I did celan the surfaces too. I put the engine together the second I got the parts back from the machine shop. Should i try another head gasket, or would it be smarter just to re deck the head and block?
-
hehe never heard of it, maybe ill ask them there
-
jeez i dont have anger problems, just zed problems and it is my daily driver so it needs to be quick
-
thats a really fast damn camera to stop that grinder wheel!!
-
anyone?
-
please?
-
i notice you have an ac compressor. it this going to be a daily driveable car?!
-
I rebuilt my l28 about 10,000 miles ago.... machined the block and head surfaces....put a felpro haead gasket on it, and now it leaks coolant at the head gasket. I want to replace the leaky head gasket and raise my compression at the same time. Would it be smart to put a metal head gasket on it, or am i going to be stuck with having to replace it with a regular one. I have never had any experience with metal head gaskets before.
-
I need help with my early 4 screw su's. They are running very rich, and I dont know how to adjust them to make them a little lean. Can someone help me??
-
I have a late '74 260Z, 2.8 engine, 1981 5 speed tranny, early 4 screw su's, ported e88 head, bodykit, headlight covers. Its my second car and Ive had it since April of '06. Bought it for $600 with a 2.6l, flat top carbs and a 4 speed.... but thats all gone now
-
No, mines 100% home made.
-
My 4 barrel setup made flames, and my 1981 accord made flames.... nice 4 foot white & blue flames.
-
I agree, but shouldnt they have one for the 350z as well?
-
Would it be very difficult for a electronic newbie to install these gauge faces? I am thinking of getting some now, they look really good. EDIT:If you really wanted to do some work, you could get some illuminated needels out of a newer car, and modify them to work in your gauges. Just a thought.
-
do the lights you use plug into the existing plugs?