Overkill Z

lol we were so washed at this point in the night hes not even looking at the half naked girl....

there is only one place...in house dyno and tuning. the LOVE Z's and im getting my car finished up there. 240sx's rb's 2jz's sr20's all over their shop http://www.performanceoptions.net/ tell them Mike Garcia sent you from B.customs

I should be trying to fit my bar in the next few days

Hey guys... the car is at the tune shop!!!! they found one of the cylinders was not firing so they are trouble shooting that before we hook it up to the dyno and start tuning.

have a safe move

well thank you. Dont be fooled tho...it has NOT been an easy build and dont recommend taking on this kind of build without talking to people who have done it before.... John with betamotorsports Has helped me a few times even after buying his cross member. THANKS JOHN! HYBRIDZ MEMBERS!!!! Z-gad has helped me with many technical questions. SCottie-gnz SlownRusty 240z 478 Stony Gookboi majaik6160 AND EVERYONE who posted thier ideas and answers... :icon2:I COULD NOT HAVE DONE THIS WITHOUT YOU GUYS!!!!!!!!!!!!!!!!!! SO THANK YOU Andrew with Suprastore.com has helped. Titanmotorsports helped with my parts list. A1-imports (local shop) has helped my ALOT with wiring and running my engine managment system. and OF COURSE...TONS of friends...i could NEVER have done with without my buddies...this project has been a great time hanging with friends and grinding on my car. Monday i have reserved a trailer set up and im BRINGING THE CAR HOME. to start tuning and cleaning lol

IM SOOOOOO CLOOOOSEEEEE!!!!!! I should have the car back at my house this weekend for tuning and cleaning.

that sounds like a plan but then you also gotta make sure the trigger wire on the Z side of the wiring harness is correct.

ok!!! bled the brakes/clutch and the car moved for the first time today under its own POWER!!!! still not driveable tho... need to wire the electric fans...do some relays for the ecu..AND i NEED HELP!!!!!!!!!!!! with the wiring from the alternator.... i 3 wires to choose from...a Red with blue line....a WHITE and a YEllOW....which wire is the trigger wire for the alternator to start charging????

it is a cell phone!!!! lol its not like i planned for the motor to actually run on the first try!!!!!! lol i will get a better quality video when its all ready to be driven. gott bleed brakes...clutch... soder up the wiring...figure out the throttle cabel...plug some coolant leaks...finish the exhaust.... and it should be driveable at that point

START UP!!!! http://videos.streetfire.net/video/My-1000hp-2jz-in-280z_687012.htm SPOOOL DOWNNNNNNNNNNNNNNNNNNNNNN http://videos.streetfire.net/video/1000hp-2jz-turbo-spool_687013.htm

well if mine blows ill just have a r154 built by Marlin crawlers. They build r154s for rock crawln.

I just looked at your build 240z 478... wow that was a flash back to 7 months ago lol.... make sure you get your crossmember from Betamotorsports works like a charm!

UPDATE....PUT GASS IN IT AND FIRED IT UP!!!! WE HAVE COMBUSTION:flamedevi:flamedevi BUT .......the injector seals were leaking like crazy...had to shut it off and pull the fuel rail and get some bigger O-rings DARN!

Where did you get that intercooler mount!?????

MY story of being on set is in carbon8 MAGAZINE!!! "ass and furious"? HAHAHAHHAHAHHA http://www.carbon8mag.com/issue/index.php

ya... its been quite a bummer...but things are moving again! I plan to do a video for first start up!

alright...heres the scoop... the place i took the car to to get the fuel lines done and wiring harness let the car sit for two months on the "back burner".... Since the car sat for so long I am Now going to their shop everyday after work and working on my car for a couple hours. The fuel lines are almost done (all hard line/ stainless) the injector harnesses are in and clipped The coil pack wires have all been redone with new wire/clips. fuel pressure regulator installed wiring harness cleaned up neutral kill wires fused wiring harness hidden oil lines for turbo done (a total Bitch) sooo sinse im doing ALL the work BY MYSELF now...its taken me way longer then i thought. If only the shop i wanted to have it done by DID it..my car would be running by now...but apparently "they were too busy to get to it"

her name is Alicia Whitten...look her up shes a friend of mine and shes a MOM! lol

AMEN MAN AMMMMEENNN

I agree

thats the side you should have seen....the camera shot the pass side.

well i have gottn a few emails from people saying that they saw my car... im going to see it tonight

you are correct! its crazy that it took 3 days to shoot a few seconds of film.....

let us know if you see our ZZZZZZZZZZZZZZZ's