aziza z

Anyone have a set of 280z illumina shocks they ended up not using?

Pm sent.

New parts needed: Datsun stuff: -s30 automatic transmission shift indicator for center console -s30 automatic transmission under car rod assembly (those threaded rod things) -Shifter gasket -240z signal and light switch (preferably not working but pigtails intact, I have a mint condition one but the wires were hacked up so I just need the wires off it basically).

I am also looking for the tranny tailhousing off a 92-96 caprice (700r4). Its the same one the JTR book mentions is needed to mount the turbo tranny.

Btw if anyone has these parts, please let me know. They are some of the parts needed for this car. THanks. http://forums.hybridz.org/showthread.php?t=155251 and http://forums.hybridz.org/showthread.php?t=155847

I looked up that it was a 289 according to the casting # on the block. Its def a chevy. Came out of an impala and the casting number was chevy. Flairs were already on the car. The shell was excellent. No rust. Floors are solid, battery tray has nothing, even the trunk jam areas are insanely clean. It was a score. You guys will get a trip once we show you what wheels we got for it. Stay tuned people.

Its got some basic stuff. Mallory ignition, edelbrock carb (still need to look up specs one it). It was in our impala which came with the motor and everything on it. Pretty much stock im sure. Im thinking it will be temporary. Me and carbs in general dont get along.

Im open to other airdams. Someones got to have one around.

anyone? Not looking forward to buying this from MSA brand new.

Well aziza hasnt given me much to do lately. Little things here and there and I needed another project. My little brother is getting his license soon and seems like he had been bit by the z bug. We started looking for a z shell so we can have a project togther. And found this completly rust free shell. Had no motor and was bought from a member of hybridz. So with pretty much a shell, a jtr kit and boxes of parts, we got started. We had a 289 laying around with an auto trans (turbo 350?). So being that this is a "Super tight budget build" this is what we will run with for a while. I got plenty of spare parts left over from aziza and all the other z cars ive had. Hoping to build this car with whatever I have. If I do buy something I want to pull something off the car or donor car to pay for it. Its a little rough but will make a great start car for him. I figure he will learn the way I did and if he does the work on the car himself (like I did) he will be careful with the car (like I am) and still have opportunities to autocross and track the car when he needs to get it out of his system. Plans for the car: -Fresh white paint with a clear coat -Black chrome everything -Stock interior -17x10.5 rear wheels -17x9 front wheels -finish putting in the 289 and get it running -r200 swap/halfshaft/shock housing -Lowering springs and shocks(car already has sway bars) The cars expected duties: - Street mostly - Occasional autocross - 1 track day a year possibly Eventually I know we are going to go extreme with the car once he saves up for another car and then the car will become a garage queen with aziza and be driven less on the street. Either way its gona be a blast building another z car. Anyway here are pictures. (its so high because it has no motor in this picture) (selling the bumper override thing and the bumper guards if someone wants it) Interior after some cleaning. Needs alot more attention. Donor car opinions welcome.

Show me what you have and how much shipped to 92627 costa mesa ca! Im hoping for z31 hubs upfront and a redrilled rear set up (but if someone has a 280z rear axle assembly ill buy it off you to redrill myself). Thanks

I also need 5 lug conversion parts. Let me know what you got!

I thought about using that dynamat "tape" stuff. Would still be able to get inside the door if you needed too.

I Found a set of front bumper brackets in SD from this board. But ill keep you in mind. As far as the battery hold down, im intrested. Send me pics. On the ac parts, I dont think those are compatible with the small block.

Im hoping for a fiberglass type (but im open to offers). My first prefrence would be this kind of airdam from msa but im not in a hurry to buy a new one from them. Hoping someone an airdam locally. Im open to other types though.

Still looking for the following parts: -firewall insulation thing -front bumper brackets -hazard switch -battery holddown and tray stuff -Airdam (show me what you have) - local only -stock 240z antenna -240z ac parts/hoses/etc also -small block chevy headers (jtr mount compatible) -small block chevy ac compressor/stuff

Sorry. Sold.

78 260z huh........ ummmm I don't think so.

Im a wheel whore But I think im going to sell these.

Im selling a set of 16x9 and 16x8. pm sent. http://orangecounty.craigslist.org/pts/1442448343.html

HLS30-08077 Thats how i'd like to do it i both my cars. Any how to tips? In progress pictures?

If I wanted new overpriced parts I would go to MSA. Im not new at this. I only go to them for must have brand new parts. But a little age doesnt bother me at all. At about $100 for the insulation piece from msa, ill wait on that. Figured someone locally might have one thats not "perfect"

Yup. Im the one who sold you those parts. pm sent btw.

Id love to see the pictures of the red door panels if you can.

Thanks for the offer. I appreciate it. But I really want them down and out of the way.