-
Posts
565 -
Joined
-
Last visited
-
Days Won
7
Content Type
Profiles
Forums
Blogs
Events
Gallery
Downloads
Store
Posts posted by pat1
-
-
My prc is 1.5 upper and 1.75 lower.
-
I got it all together today, Its running great hauls a$$ right now but it needs a tune. I going to get it tuned asap.Here are some pics
Rb20det...... yes a rb20 for you rb haters LOL
Holset hx35
440 gtr injectors
NIStune
3 inch exhaust from the turbo back
turbonetics deltagate wastegate
profec b boost controller
moded stock exhaust manifold to accept the wastegate
z32 Maf
-
-
I tried calling that site last year with no luck.
If you need a pan let me know. I have been building rear sump pans for this swap.
My prices start at 250.00
Here is a link
-
I just noticed that you are in Atlanta, if you would like to take a look at my set up come on over. I just finished installing a holset hx35 turbo, 440cc injectors and external wastegate, and plazmaman intake. I'm going to get it tuned soon.
-
You can use the stock rb20 mounts and the stock 280z driveshaft mounts right up. You have to slot the z subframe alittle. Take a look at my posts there are pics of my set up before I changed it and made my own mounts.
-
Sounds good, let me know
-
Coil packs are breaking down.
-
Man you sure are negative. Let the guy do this swap.
All the parts are getting cheap now. You just have to know where to look
T-belt 41.00
Seals 30.00
Rear main 21.00
Water pump 60.00
Intercooler piping 60-100
Driveshaft 250.00
I can get the rb25 swaps local for 1800.00.
I bet you never driven or rode in a z with a rb20. Don't knock it until you try it. I have had several people act the same way until I take them for a ride.
-
This swap is not hard and isn't rocket science.
Doing it the RIGHT way doesn't have to cost alot.
-
Well I think and know that the rb swap CAN be less costly that some people think. If you can fab your own mounts and oil pan and do your own wiring it is possible to do it RIGHT on a limited budget.
I made a set of mounts for my rb for less that 20.00. I bought the steel and made some kickass mounts for Yes 20 bones. It was very easy and look incredible. But I have all the tools need to cut,grind and to weld steel or and other kind of metal.
I have been and will keep making the oil pans for this swap. To help you guys out. My pans start at 250.00 and go up to 600.00 plus.
This swap doesn't have to cost a arm and a leg.
-
If I had to choose I would go with the series 1.
Because
1- the coil packs on these rb's are crap. The series 2 coil packs are harder to find and cost more.
2- the common problem with these rb's are either the PCM or the
Cas and both are hard to find for the series 2 and cost alot more.
-
No problem, just let me know. I'll be glad to do it for you.
-
Mark on the pan what you need changed and Ship it and I'll fix it,no charge
-
I fabed up all my intercooler piping but I have all the tools to do the job correctly. Get yourself the intercooler and some 45,90 degree and some j bends and some straight cuts and go to town. It's really not that hard. I maybe have 50.00 in my piping if that.
-
the turbo is out of a dodge diesel truck. I ported out the exhaust housing to.
the injectors needs the resistor box which I have and need to install also.
-
It's a rb20. I have about 1.5 inches from the inner wing. It fits like a glove
-
I just want to show some pictures of my neverending project.
holset HX35 turbo
turbonetics deltagate wastegate
look alike Plazmaman intake. It was polished aluminum but it was way to shiny for me.
440cc gtr injectors
I just received a new prc double pass radiator a few days ago
3 inch custom built exhaust
-
It's the ecu or cas
-
I would try a 10k ohm resistor. If that doesn't work check your wiring.It could be possible that your ecu is trashed
-
Great job so far. Keep up the good work man. I'm thinking of putting a surge tank in mine.
-
-
-
Any codes? What's the compression? What vacuum do you pull at idle? I would check the can timing. If the cam timing is off it will make the engine run like a dog. Check the maf voltage.
just a few pics of what I have been up to
in Nissan RB Forum
Posted · Edited by pat1
I don't have a build thread sorry. The intercooler is a 24x12x3 from tank to tank. I wish I used a bigger one. I was thinking of getting a bigger one and welding it up myself. I didnt have my ac/dc tig when I bought this one. I wanted the inlets and outlets to match up with the stock holes in the core support.
The fuel psi reg is a nismo type a. I cant remember what brand the fan is (I bought it over 15 years ago But is a 12 inch fan and it's a blower so it can go on the outside of the radiator.
Let me know if you have anymore questions.