Mudge
-
Posts
1965 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Events
Gallery
Downloads
Store
Posts posted by Mudge
-
-
I look at my gauges probably once every 5 minutes if not more, I also look in my rear view pretty requently.
-
Bendable tubing like wrinkle wall? Its a nitpick but its not as good as mandrel, why did you buy the car and throw an LT1 in it if you weren't ready for "alot of work" right? You are doing alot of work! How many people wont even change thier spark plugs, for those that even know WTH they are.
-
Trevor, that may very well be, because people who drove the car said it didn't like to turn - Richard Petty comes to mind as someone who said that. Looking at how tall it is, and not using a tubular brace, its basically a 3 sided wing so I dont doubt it at all.
-
"My bad," Just looked at the Tunercat site and it says F/Y/B cars supported.
PCM PN#
16181333 or 16188051
-
I live in 94080 http://maps.lycos.com
However I do not have a Corvette definition file, if you can give me the PN on the PCM I can check to see if they are actually the same, but since the Vette has a master computer I do not believe they have the same memory allocations/spaces. If it is like Tunercat says, that I will need a new PCM file, I can get it for $20 and would be glad to flash it.
I'll ask around and see what I can find out.
-
I think thats f'ed up, regardless of him being "ignorant" for not speaking mandarin or not.
He went back the next day and "suspects" that the parlor knew they were going to close? uhh...... earth to Beavis...
-
Lame
-
Mah favorite
-
I know the turbo engine better than the NA, but on the Turbo the distrubutor (except on 81 cars) is the full monte when it comes to telling the computer when to fire injectors and ignition. My understanding is the NA diz is a magnetic trigger instead of optical? I know the ign module is built onto the side of the housing.
Anywho, I found out that my injectors and my coil module were dead. I unhooked the fuel pump (you can do this via relay), and turned the diz over by hand to listen to each injector firing, only 2 made any noise at all. I pinned out the entire computer all the way back to the key several times (about 8), all trying to find this mystery problem. I got a signal from the diz, and to the ign module but the module never fired, tested coil resistance as well. So anyhow, grab a book if you dont have one and test test test, otherwise all these guesses can be expensive
-
Hell yes I have Tunercat, I wont touch LT1 Edit with a 10 foot pole. Not only based on price, but being forced to run the software 100% in Winblows. I'm a sys admin and I would not put my life support system on Windows anytime soon, DOS I would trust much more so, Unix more so than that.
So, for the sake of running my near 200 if not over 200 flashes, and never wanting to send my PCM in, I use DOS and only DOS - although Tunercat now has a Windows flash utility as well. My current laptop is too slow for me to risk trying it, but I will someday (several reads before any writes). The advantage to being in Windows is the ability to avoid reboots while on the dyno.
I have used Tunercat on 3 different laptops in my car and never had a problem.
-
Did this just happen suddenly or was anything recently done to the car?
-
All fans are going to be noisy, but by design db can be cut down a bit, I think thats mostly going to be blades and shrouding though. With no underhood insulation on the Z car that probably has some minute effect too, 1-2db?
-
If I ever build one of those Cadillac tank conversions, maybe a V16 would be nice...
-
I'm sure the small one would fit in the spare tire well
-
There is alot that goes on beneath the skin that can't often be seen, until its too late. Hope they pull through and learn something from it.
-
Unplug some vacuum lines
LoL -
Geeze, I can't say I've seen anything above 175#, them is some freakin beefy injectors!
-
Jim, you dont get somethin' for nothin', thats true. Yet another reason todays cars have freakish alternators pumping out 140A+. I'm staying electric myself, better cooling in traffic (for those picky or who really need it due to HP or ducting issues), turn it off or on whenever I want (either by switch, or by computer which I set and forget), yada yada. Its a personal preference thing I guess, but like carbs I think they are a thing of the past, for my own project type vehicles.
-
It was designed by mercury marine for use in the ZR1 corvette only.
Designed by Lotus, built by Mercury
Yeah, it was badass 10 years ago. Its heavy in part because its quad cam (cam swap is going to be at least $1,000). With LS1s and LS6 beating it like a redheaded step child, its nothing but bling factor, but thats just my opinion. The intake manifold has an adjustable baffling internally, which helps with low end power by closing some of the runner off.Tim Allen had one in an Imp that supposedly did a burnout for the full quarter, but never having seen it, who knows.
-
Electric fans are either 2 speed, or they run full blast all the time. So for a daily driver, cooling could be kept steadier, and producing less drag on the drivetrain give you a little bit of HP. I like electric fans myself.
-
1,000 cc injectors???
-
I looked at Motor Week or something while waiting for my haircut, and it does say that the Caddy/Vette are going to be using an updated version of the Northstar.
-
Yeah the ZR1 engines were about 25k in crate form, same power as an LS1 and sooooo much more, LS1s are more than I'd want to spend already
They have come down alot, maybe the average price for a ZR1 engine is around 13k or so, see a few now and again on eBay. Heavier, bulkier, more expensive to work with, hmm give me something else It was a great engine 10 years ago, but I think thats the key, 10 years ago. -
Some of these systems do offer estimation/base calc VE table software, which is sure neat, but your right alot of people seem to think that you plug in cam specs into the computer!!! I find it funny, but tuning EFI is something that needs to be experienced I guess.
LoL
Yeah, it was badass 10 years ago. Its heavy in part because its quad cam (cam swap is going to be at least $1,000). With LS1s and LS6 beating it like a redheaded step child, its nothing but bling factor, but thats just my opinion. The intake manifold has an adjustable baffling internally, which helps with low end power by closing some of the runner off.
They have come down alot, maybe the average price for a ZR1 engine is around 13k or so, see a few now and again on eBay. Heavier, bulkier, more expensive to work with, hmm give me something else
what the 350z should have been
in Non Tech Board
Posted
Body line over the rear fender looks feminine to me, resembles a Supra or 300ZX quite a bit I'd say.