skyline240z

Finally finished the bottom side of the pan.

I make the billet alum engine mounts. I dont have one for the tranny.

Did you get the motor mounts yet.

Good luck in you project, looks like you got the car in the lower mainland.

Hi redrbz. pm'ed you a few days ago, do you still need a pair of mounts.

I sold the last pair month ago, can make some more if you want it. Rick

Thanks ezpickenZ for the pics. Sorry 05plsrt4, don't have any pics you're looking for. If someone can help that would be great.

About 1" from the fire wall.

What do you mean by land the motor.

Let me know if you want my billet alum mounts. Rick

I have a set to sell,you can pick from 3/4 for $50 usd or 1" thick for $60 usd plus shipping. Rick.

Why don't you go make one yourself, since you are a machinist and have access to a 5 axis machine, maybe you can sell some too.

Hi Ricky How much will the collector cost by itself. Thanks

Is the turbo collector machined from billet block or cast, then machined out.

I think a billet mount bracket should be a custom one off for their own car. My pump was $3000 from Auto Vardi. If you pick one up from Ebay, they are all different sizes and configurations so it's hard to make mounts for everyone.

I will make one for my pump, it will be a billet piece right to my Auto Verdi 6 stage pump, not sure if other pumps will fit the same.

Here is the other side roughed out.

Hi Chris, The material is pretty close. You're off on the production side if there is. There is no machine shop that will be able to make a pan like this in half a day, even though you have to make a production run. I think realistically it will take a full day to make one of these. I don't foresee making lots of them. It took me days to measure it up, design and draw in CAD and program it. It will probably take three days to finish the first piece. You're right that it won't be cheap. This pan will have three -12 AN fittings coming out from the driver's side. Raw Brokerage sells theirs for $1250 and that one is nowhere as complex as mine. I will guess it will be somewhere in the $1500 to $1600 range. Rick

No idea yet on pricing, I'm putting in the money and time for now, I'm making it at my machine shop. Here is what it looks like today.

Looking to make a few of this pan, any one interested in one. Billet alum 2.5" tall with a three stage scavenge design.

I have a set like that, but no rear fenders flares. Got it a few years ago from Japan. If your are interested, let me know. Rick

Uppers and lowers for all four corners, it's going to be built like a race car, the goals is have this car for track days and very little street driving.

How about these spindle hubs for a Z car .

Do you need billet alum mounts for your rb engine.

Hey your are back, good to see some progress. Still making custom parts on the side to help fund my project, let me know if you need something custom machining too. keep posting. Hi there, I have one in stock, but the holes are not drill yet because people might want 4 or 5 lugs. If interested let me know. Rick