240Z_Master

YO! When are the products ready? I'm hungry to spend money...

I found NGK Plugs for like 15 bucks, made for the 6 cylinder L6.

What springs are you using?

Hey, don't forget about all the Porsche colors, those are always bad ass. Look for the Carrera Yellow, I don't know what it looks like but I know Porsche never lets me down.

I agree, the wing does kind of suck. However, my exhaust tip is 4" and it's pretty damn big, what makes the muffler look nice is that I still have my Chrome Bumper on so it's kind of hidden and kind of not hiden. Your car is complete black primer with a chrome looking exhaust tip like that so you're going to contrast and look like a sore thumb,

Hey guys, I have been told that I can't fit the old school JDM Watanabe's on my car because it will hit the coilovers. I think this is bogus, I think it will fit fine. Do you know if the ZGs in Japan run coilovers? I highly doubt it. I think they run pretty much a stock suspension. 15x9 with a -13 offset I figure gives it a 4 inch backspacing. I am running Tokico springs and I think it should fit fine under a set of ZG Flares. So my main question, will I need coilovers? I see no need for them.

I went with OEM Yellow, my photo of the car is below

This is what I plan to run with my ZG Flares. 15x8.5 Front with -6 offset 16x9 Rear with -13 offset Tires Front 225/50/ZR15 Rear 245/50/ZR16

I have seen the Carbon Fiber ZGs around somewhere, I think i'de rather get those. Since I got my full refund on some wheels I ordered that never came in, I think i'm going to spend a pretty penny on some JDM Watanabe's. 15x9 front, 16x9.5 rear. That would be a pretty penny but with carbon fiber ZG flares..yumm... LET ME KNOW!

I am looking for a set of ZG flares. First question, does anone make them in Urethane? Next question, is there anywhere I can get them other than motorsport? Group buy?

Hey guys, I wonder if the stock system will work plenty with tripple carb upgrades and a cam. I have done just a coil and wires for now... But I want to know what systems you have in your car, I plan on using MSD 6AL and some other goodies, but that would be nice if you guys could just say your whole entire setup, dist, ignition, coil, etc... What has worked for you? what doesn't work? THANKS! BTW, I plan on going all MSD.

Hey guys, I tried searching, honestly I did... Anyway I am trying to find an aftermarket brand of spark plugs, possibly NGK, or MSD. However in their catalogues, nothing is available. What have you L24 people put into your carbbed motors? I'm looking towards NGK and MSD, probably something like a universal application. I have looked into MSD and they said a universal part number 31179. NGK was closed by the time I called. Possibly Nology wires, but anything would work, or at least anything that could be reccomended.

This is what I will be planning to do... R200 out of a 280ZXT (Good thing I bought that parts car because it came with CV's and the R200) R200 3.54 (Came with my parts car) CVs' (Came with my parts car) MM Adapters (215) R200 Mustache Bar (10 bucks from pick a part) Anything else I'm missing? Does anyone want to save up in the future for some crazy Quaife LSD group buy?

15x8 you should run for smallest size is 225/50R15 15x9 you should run for smallest size is 245 wide, but I dont know who makes these.

Just to correct you on this, the carbs will need to be rebuilt because the dude over there in Italy pulls them off of different applications. So that's what I did. Havn't got them back yet but hopefully all goes well.

I think Ross has them over at his deal... modern-motorsports.com Plus he's always on there so tech support is like instant. lol.

So if I'm not corrected, I can find some non-welded Maxima Brakets and get some Z31 rotors with the 240SX calipers and this should totally bolt together?

I bought the 40 DCOE Solex ones from the dude in Italy, they seem very nice, I'm getting them rebuilt right now.

What you should do is like go to the tire manufacturer's website and look at what range that width tire can go into. Like Bridgestone will post on their site this tire is safe for ex (7 inch to 9 inch wheel) and something like that.

Do you have any pictures? I think I need to drive to Ventura to see what you got going on. What brackets did you use to mount the rear 240SX Calipers? I am planning to do my 240SX Rear Brake swap but am doing a lot of research first.

PS, I also got the Gram Lights 57 Pro in 15x7.5 and did a lot of research on the offset. PM me or Email or AIM and I might be able to help you.

I might be able to get the SSRs cheaper. What size wheels did you want to get? Maybe then you could figure out the offsets from that. I found a guy who sells used Japanese Wheels maybe cheaper for you. http://www.takumiproject.com He's in Southern California. I've always wanted a set of SSR Mesh Wheels, Watanabe's, and some gram lights...

So what about having a 1981 280ZXT MC into a 1970 240Z? Anyone done this? fitment? etc..