zentech

I have two sets of turbo one set near new OEM brown color coded for 280 ZX cars is $200 shipped the other set is new OEM $300 b/o shipped.

Three camshafts.. One from a 71"Z with an E/31 cylinder head $125,the other two are from 74" Z-260 E/88 cylinder head $145. I have two hot camshafts one for a ZX-Turbo with matching lash pads $275 and the other one is for a stroker motor using carbs $165. Pics can be sent via a cell phone.

It's the Driver side.

I have a new S-30 door panel/black. It's in the original Nissan packaging and would trade it for a low mile r-200 rear diff with 4:11 ratio.I paid close to $400 for it and they are no longer available at Nissan.

I have a 4:38 with less than 40k miles if interested.

I have an Arizona/Z mustache bar (new) never been mounted on a car but was bolted up on a differential and never installed. $175. Not in a rush to sell it as i might just use it some day later in summer.

Your info is very vague. What year is it for,two seater or 2+2 ? I have 4/types of flywheels for 1974-1983 z cars.

If you're not satisfied with the one he has, i have a brand new one made by an aftermarket performance manufacture and it's 60mm in diameter made especially to aid more air to the turbo. I paid $285 for it.I have one on my 1975 Z and it's given me 20 more HP's.You may not be looking for that price but thought i'd give you another option.

I have ten swastika center caps like new $35 each.

I have the wire harness and the turn signal bulb receptacle.

You're correct i had quite a few of those back in the early 90's that i shipped to individuals all over and bought them for racing application.The T-5 trans weighs more than the non turbo 5/speeds.

$55 shipped to you.

I have one in good condition if still looking.

Looking for a set of JE or equal quality forged pistons set with 89 mm and rods to go with it. Willing to trade for my brand new R-200 CLSD 3:90 ratio. That's it... and good looking.

Where in California are you i may have a connect for a radiator.

I have a pair of rear strut assembly complete left and right from a 1978 Z. Let me know.

Yes i want the crank as the machine shop is finished with my block. My transportation is down and still have to find transport to get to you which could be tomorrow Wednesday. Question do you have rods and pistons for that crank ? thanks for patience.

I have a rebuilt roadster comp mid-close ratio 5/speed transmission that i'm willing to trade for an r-200 clsd and a maxima diesel crank. If you have those parts pm me with your parts info and any questions you may have about this trany. These trans go for $1900 to $2700 used.

Looking for an r-200 rear diff with 3:90 ratio from 1983 ZX and later Z car.Willing to trade just let me know what you need as i have a boat load of new and good used S30 & S130 parts.

Hey guys, looking for a good condition cowl for a 1975 Z-car preferably in white.I damaged mine after hood release cable broke and had to use a screw driver to get to the open lever.I have lots of good drive train, electrical and small body parts to trade, but no large body parts or seats.

Wanting a Good clean //**driver side**//window glass with no scratches or pits for 280 Z fuel injected 1975 production date. Also in need for an R-200 from a 1983 Zx with low known mileage with 3:90 ratios.I'm open to trade parts for the value. Parts such as injectors some new and some good used and tested, air-flow meters from 1975-1988 Z cars,computers ECU units and lots of small hard to find items. I have just any relay for 240 / 260 / 280 Z&Zx models.You just have to know ID #'s on relays...Thank you for any interest.

Looking for a good R-200 rear diff with stub axle application from a ZX-S130 car.Let me know what you have...thanks.

Title states my need for just *One pair* of R/b rotor 15 x 7 with nothing more than O to +15 Offset to match a new pair i already have. Either silver or black spokes will do.Thanks for your help.

Pm sent.