Jump to content
HybridZ

zentech

Members
 View Profile  See their activity

  • Posts

    7

  • Joined

  • Last visited

  • Days Won

    1

 Content Type 

Everything posted by zentech

  1. zentech
    I have them *brand new* in a couple of colors, i know for sure a blue a burgundy (red) and perhaps a black. I'll check tonight when i get home. If you need new let me know as there are many used pieces out there too.
  2. zentech
    It's still available.I tried sending you a P/m but it did not go through. Need pics i can text pics to a cell phone.Let me know.
  3. zentech
    E/mail me @ mwsilkmike23@gmail.com.
  4. zentech
    I have a machined F54 block new freeze plugs and only honed not bored out, pistons are still on the rods, and crank has been polished.P/m sent
  5. zentech
    Jamal, could you give me a count on the splines ? The picture is a little offset and i could miscount the splines. I have counted 25 splines so let me know what your count is. I'll also pay the extra cost to have it shipped next day delivery if you can do that with the shipping.Thanks.
  6. zentech
    Jamal, that sounds good to me. Can you send me the spline count and a couple of pics? As soon as i hear back from you i'll expedite my pay pal.Thanks.
  7. zentech
    I have a couple of non EGR intake manifolds. P/m sent.
  8. zentech
    Looking for an 82 ZX automatic transmission drive shaft to fit transmission bigger spline. I swapped out a 79 ZX automatic trans for an 82 ZX automatic trans and my original drive shaft does not fit the output spline on the 82 ZX transmission. So i need a complete drive shaft or just the spline to fit. Let me know if you have it and cost to ship to 95368. Thank you for your help.
  9. zentech
    I have a nice set from a 1983 ZX car. P/m sent.
  10. zentech
    Got several pairs in excellent condition. P/m sent.
  11. zentech
    I have an exhaust manifold from a 260Z in excellent shape. P/m sent.
  12. zentech
    I have three r-180's one 4:11, 3:54 the other 4:37 if interested.
  13. zentech
    I got a 280z fan shroud in the east bay San Leandro ca. 30 miles from San Jose off 580 fwy. Come get it for $45.
  14. zentech
    I have a complete rebuild with new valves and everything done at a professional speed shop.I'm in California and would be will to ship it to you. Need pics, i can text them to a cell phone.
  15. zentech
    That don"t sound right. I believe lower means 3:90, 3:70 or 3:54's. I hope i'm correct.
  16. zentech
    I have the BPT-valve and a brand new stainless pipe that goes to the EGR valve.
  17. zentech
    I have two set for snow flake wheels and are in blemish free condition. P/m sent
  18. zentech
    I have a good working Ign distributor and i can ship this.
  19. zentech
    I have two rebuilt shafts from an r-200 diff. P/m sent.
  20. zentech
    I have a 4:11 r-180 with 40k miles. It has 4/pinion gears on each side and make them bullet proof and hardy enough for a 240Z diff replacement.
  21. zentech
    I have one here in Northern California. I can send it next day delivery at your cost. P/m sent.
  22. zentech
    As soon as i pull out the disc brake conversion hats, i'll text them to your cell.
  23. zentech
    P/m sent.
  24. zentech
    I have all the parts for the 280 ZXT. Come get them at reasonable prices. No junk here, i keep only good low mile parts.
  25. zentech
    P/M sent.
×
×
  • Create New...