zentech

Looking for a pair of Vented front rotors to retrofit Toyota S-12 Calipers onto a 280 Z. Let me know what you have and price, i also have a new pair of 280Z front rotors and a pair of new ZX rear brake rotors to trade.

Let me know what you've got laying around! FYI, I'm in the Detroit area for shipping purposes. Thanks. i'M FINISHING a rebuilt L-28 IN A COUPLE OF DAYS. send me a p/m for the details etc.

I have a set of 12 i stored just for spares when one or more is needed. P/m sent.

My 1975 Z has been slightly lowered and the rear control arms are still not at 180* degrees which should leave the half-shaft spline not totally compressed. Question: Would it be ok to take the half-shaft to a drive-line repair service and have it cut about 3/8 to 7/16" of an inch just to be sure there is no binding ?

I'll be shipping your ring and pinion today and will have a tracking # for you. Thank you.

Hey John,* that's what i thought* however just by visual inspection when the car is on jack stands i use a jack under the left wheel and raise it up to about where it would be compressed when the car is on the ground and it looks like it's totally compressed.All i have done is swapped the r-200/3:54 for an r-200 3:90 to match my close ratio 5/speed. I have owned about two dozen Z cars and have worked on over 60 z cars in my time and never had that particular issue. I have several half-shafts mixed in from S-30 to S-130 z cars and they all seem to have the same length. I appreciate your imput. Thank you.

Yes got it today. thanks.

I need the shorter of the two half shafts the left side for a 75Z preferred pick up in the Bay area. Please let me know if you have one from the driver side (left) thank you.

I have two series one head light switches in like new condition. Send a close up pic of the wiring harness.

I have a set of main caps and they are marked for order of assembly. P/m sent.

I have two pairs of tail/light harnesses. P/m sent.

Not a problem. Any tracking #?

Did you mail payment as yet ?

Reproduction is no longer available that was back in the late 90's.

i have a brand new aftermarket pair. P/m sent.

I have that sandwich plate and i can text pics to a cell phone number. Send me a p/m with your phone info for pics.

I have a brand new ring and pinion for later r-200 z31 differential it's a 3:70. P/m sent.

I believe i have it let me check.

I have one that has been ported at the trottle opening.

P/M SENT.

I have several sets of Nissan (new) OEM injectors i aquired in a Datsun/nissan business buy out,but i'm not sure of the ID # 's for 270cc injectors. If you can supply that it's very possible i have them.

I have a 240 Z tail lens assembly in show room condition and the metal surround has zero dents and no rust. If you want to see it send a message to my in box with a cell phone # and i'll be able to text pics for your view.

Interesting enough, i just sourced a good gas tank two weeks ago, but will have to get in touch with the guy that has it. Do you have your own shipping or can you arrange your own ? Let me know and i'll try to help out here. Cheers !

I mentioned in my a/d not sure what model. I bought them new on e/bay and i never measured the piston as i'm assuming that's what you meant to say. The pistons by eye ball looks to be nothing less than an inch and possibly an inch and a 1/16th diameter. Pretty large for strut pistons and the tube itself is 16 inches.That's all i can tell you.

I have a new pair still sealed holding the piston for a datsun not sure which model they will fit P30-173 and are up for grabs.