Jump to content
HybridZ

Two80z4me

Members
 View Profile  See their activity

  • Posts

    516

  • Joined

  • Last visited

  • Days Won

    1

 Content Type 

Everything posted by Two80z4me

  1. Two80z4me
    they are volk te37v you could always just google that same question, and or go to the respective brands website which tells you straight away. they are 0 and lower if you want.
  2. Two80z4me
    yeah it was mostly a happy thought than a real idea. What area in bellevue are you? I'm up in lynwood but its not too bad of a drive if you guys need a hand.
  3. Two80z4me
    yeah it was mostly a happy thought than a real idea. What area in bellevue are you? I'm up in lynwood but its not too bad of a drive if you guys need a hand.
  4. Two80z4me
    all the codes they have on the map sharing are no longer hosted so I can't download some of them, and the ones that are do not have what code they are using or the .ini file. If you have the .msq and the .ini and what version it is I'm sure I can make it work, along with the specification of whats done to the motor That would be enough, I just need to have the matching tune/version because the MS2E I got has the 2.88 obselete version on it that no one uses. Thanks a ton.
  5. Two80z4me
    or just a L28ET .msq and the code your ms runs on.
  6. Two80z4me
    Maybe we could rally out to eastern wa to get the z in a z caravan haha, I make the trip to Eastern Montana and back quite a bit in the Z. Good times on I-90. This damned rain makes it hard to be productive lol
  7. Two80z4me
    Basically like the title says, I need a .ini file that goes with a stock L28ET MS2E tune .msq file and what code you're using it on. It would be a huge help, thanks a ton Hybridz! (checked the post your tune thread and it didn't have any .ini to go with it) Thanks, Sean.
  8. Two80z4me
    I most likely will. Do you have a soldering tool? I have a few wires that go to the relay board I need to zap.
  9. Two80z4me
    yeah, I definitely want to get the diff welded on my R200. I used to have a LSD carrier when I got it but it was all sheered out to sh*t so I had the PO just put in the Open R200 before I picked it up. I'd like to start going back up to evergreen drift days in it (rather taboo for a z to drift, but I do track racing to) The mustache bar bushings are painfully simple to do but just time consuming to get all the stuff off to do it, should've done it when I re did all the u-joints.
  10. Two80z4me
  11. Two80z4me
    Well, I need to do the rear diff mount bushings and diff seal as well as the RT mount once the turbo's up again. So while I'm there I see no reason not to put in the welded diff haha I can deal with a little tire screech and crappy turning radius for better traction.
  12. Two80z4me

    Nice, yeah I was at Casablanca apartments just east of the airports by all of the car dealerships. I only saw a couple Zs driving in Everett, junky ones though. At the memorial day car show in Everett I saw some nice ones and met the member hls30_373727 or something like that. He's the guy that makes the pb starts and wiring stuff.

  13. Two80z4me
    Hey, good work going on! If you need any parts I might just have them. Have a parts 240z and a huge bin full of 280z engine parts from when i swapped to turbo. Also, let me know how welding the differential goes, I want to do the same but I live up north in mukilteo and the rain is kinda heavier up here, still want to weld the diff though. Keep on working though!
  14. Two80z4me
    I can't wait to see them. I've been waiting to see a pair on a black z like mine before I buy.
  15. Two80z4me
    Midnight club LA actually has a very very nice S30 in it, and you can drive it from the cockpit view and get realistic z aftermarket parts. I was impressed for a midnight club game.
  16. Two80z4me

    Hey, was looking through some posts and saw your in Mukilteo. I was living over just south of Boeing this summer. Ill be moving back over in June. Are there many HybridZ members in the area? If I remember right you were in montana right? You over on the west side for school or permanently?

    Later.

    Derek

  17. Two80z4me
    Life can be a *****, it's never going to be fair, or fair in the eyes of the one at the bottom. Take your dog, and your car. I have a fully grown german shepard and a boston terrier and my z is my only car, the fit in there happily, hangs his head out the window and could care less about having 30sq ft to move around in.
  18. Two80z4me
    So get new wheels and get it recalibrated, or just use your brain to go hey I'm going faster than my speedo says, so I need to go a little bit less than 25 on my speedo. maybe thats just my logic.
  19. Two80z4me
    with the exception of billy chang goes to mrs.redmonds class I hope lol the other two vidoes were done on a cheap camera, this was done on a really nice camera,but a cheap gyro so the shots were shaky haha we're going to the camera shop in renton today to go get a new steady gyro.
  20. Two80z4me
    hey, a video I produced with my turbo z in, going to be more of a drifting movie ,but here's a shenanigan free teaser with a awesome z in it. Enjoy!
  21. Two80z4me
    I proudly scrape the speedbumps. It's okay too, because I still track it.
  22. Two80z4me
    haha thats a proper 2+2.
  23. Two80z4me
    nothing even remotely close?....
  24. Two80z4me
    Bueller?
  25. Two80z4me
    His are N/A Tunes, but the fuel should suffice. some of the other basic set up stuff is troubling me, the serial cable works about half the time.
×
×
  • Create New...