HLS30-08077 Posted February 25, 2017 Share Posted February 25, 2017 I'm making the DZ-Start again!! Same push to start ignition kit that MSA used to sell. I made them and sold them to MSA years ago. I had no plans to do it again but enough people from multiple sites showed enough interest that I finally dropped the hammer and decided to do it one more time. The other thread is locked so here's a new thread. I tried to run a "For Sale" ad but I need to be a donating member. Can't Donate if I don't sell any, right? I now have 56 boards left to fill future orders...... These vehicles all use the same ignition switch and wiring order. And the DZ-Start will plug right into them.....1968-1973 510 1970-1978 240Z, 260Z, 280Z 1979-1983 280ZX 1972-1973 1200 (B110) 1979-1982 210 (B310) 1978-1981 510 (A10) 1977-1981 810 (Bluebird) 1982-1983 Maxima (910 Bluebird) 1979-1982 310 (N10) 1977-1983 200SX (S10) 1979 Datsun 620 1980-1982 Datsun 720 Subaru 1982-1987 Brat 1986-1987 GL 1980-1984 DL 1980 GLF 1980 GL 1980-1987 StandardThe Datsun's without this style switch can have the DZ-Start wires reorganized to make them plug and play The DZ-Start is a true Keyless ignition button kit. remove your ignition switch, plug the ignition connector into the relay pack, connect the ground wire to the dash, the brake wire to the brake pedal switch, connect the coil wire to the coil (-). Plug it all in to the control box, mount the button where your ignition key used to go (open it up by 1/16") and you're basically done. Flashing "LOCK" button gives visual on the security.The remote option gives you 2) ON/OFF remotes that disable the button from functioning.The RFID option gives you a single remote for a true hands free security option that enables/disables the button as you approach or walk away from the vehicle.All kits come with a toggle switch to disable the button and The Basic kit also comes with a security wire that can be tied into almost any basic or advanced alarm with "Starter kill" option that works with your alarm So here's the new pricing. $260 for the standard $285 for the remote option w/ 2) remotes $300 for the new RFID option w/ 1) fob Shipping is included in the prices (in the US) The Red GT-R button is readily available on eBay for about $45 +/- $5I do not carry them, so if you want that, buy the kit then buy the extra button on eBay. Let me know, Dave wolfin32z@yahoo.com Quote Link to comment Share on other sites More sharing options...
HLS30-08077 Posted February 25, 2017 Author Share Posted February 25, 2017 To the Admins.... If any units sell, due to this thread, I will donate accordingly. Quote Link to comment Share on other sites More sharing options...
TimZ Posted February 26, 2017 Share Posted February 26, 2017 I had no plans to do it again but enough people from multiple sites showed enough interest that I finally dropped the hammer and decided to do it one more time. The other thread is locked so here's a new thread. I tried to run a "For Sale" ad but I need to be a donating member. Can't Donate if I don't sell any, right? Seriously? Pretty sure the bar for being considered a "donating member" is pretty low. Bad form. Quote Link to comment Share on other sites More sharing options...
Greeko Posted February 26, 2017 Share Posted February 26, 2017 Seriously? Pretty sure the bar for being considered a "donating member" is pretty low. Bad form. Just curious... Have you donated?... Quote Link to comment Share on other sites More sharing options...
TimZ Posted February 26, 2017 Share Posted February 26, 2017 (edited) Just curious... Have you donated?... Not recently - I'm not trying to use the site to advertise and sell a product, either. If you can't understand the difference then I'm not sure what else to say. Edited February 26, 2017 by TimZ Quote Link to comment Share on other sites More sharing options...
HLS30-08077 Posted February 26, 2017 Author Share Posted February 26, 2017 I haven't been on or posted in a while. Years maybe. But then again, I've been busy with life. I get the occasional 240Z electrical question but that's it. No reason to donate to the cause. But like I said. If any units sell due to this For Sale Ad. Then I will donate accordingly. Quote Link to comment Share on other sites More sharing options...
TimZ Posted February 26, 2017 Share Posted February 26, 2017 (edited) It looks like there is no donation requirement for the vendor's forum, so I'll retract my statement. Edited February 26, 2017 by TimZ Quote Link to comment Share on other sites More sharing options...
HLS30-08077 Posted February 26, 2017 Author Share Posted February 26, 2017 Well I am a Vendor of sorts. I'll be a donating vendor if these start to move. Already got a couple inquiries but nothing solid yet. Then again, it's only been a few days. Dave Quote Link to comment Share on other sites More sharing options...
HLS30-08077 Posted February 26, 2017 Author Share Posted February 26, 2017 And what is this crap...???? "An Error Occurred" "You have reached your quota of positive votes for the day" I've never used the "LIKE" button before but apparently 1 like is the max.....????? 1 Quote Link to comment Share on other sites More sharing options...
grannyknot Posted February 26, 2017 Share Posted February 26, 2017 I asked the same question, apparently you have to donate first before you can "like" anything. 1 Quote Link to comment Share on other sites More sharing options...
RB26powered74zcar Posted February 27, 2017 Share Posted February 27, 2017 Believe it or not, I get the same error if I try to "like" something Quote Link to comment Share on other sites More sharing options...
1vicissitude Posted March 13, 2017 Share Posted March 13, 2017 Dave, I have one of your old kits, the 2 key fob variety. I never installed it, but is the rfid option something I can have upgraded on mine? Quote Link to comment Share on other sites More sharing options...
HLS30-08077 Posted March 13, 2017 Author Share Posted March 13, 2017 The RFID system I use can be attached to any style of DZ-Start.I can prep one for you and send it with the T-Taps to tap the DZ-Start harness and instructions for everything else. The PKE (RFID) only comes with 1) keyfob, but if you want another or a replacement, they are available online. I can take care of that. $40 shipped Let me know, Dave Quote Link to comment Share on other sites More sharing options...
snell1884 Posted May 11, 2017 Share Posted May 11, 2017 Dave, I have an old DZ-Start kit as well. I have an Alpine 8080 alarm from "way back" that has a fob to lock/unlock the doors and roll up windows...or will do it automatically when armed. Can the RFID option be tied into the alarm to arm/disarm with the proximity sensor? If not, I really just want the doors to lock and unlock with the proximity sensor...I could remove the alarm. Quote Link to comment Share on other sites More sharing options...
HLS30-08077 Posted May 12, 2017 Author Share Posted May 12, 2017 WOW!! That's like 15+ years old!!!Go ahead and install the Alpine alarm like normal, BUT........ Use the "Starter Kill" wire (Ground when Armed) wire. Connect it to the Orange disable/enable wire on the DZ-Start. You'll still have alarm function and when you arm the alarm, you'll disable the DZ-Start. (Disarm the alarm to Enable the DZ-Start again) Hope that's what You're asking for, Dave Quote Link to comment Share on other sites More sharing options...
snell1884 Posted May 24, 2017 Share Posted May 24, 2017 What I really want is to not need keys at all. I want the doors to unlock when I get close to the car and lock when I walk away. I don't need the alarm so I could remove it if necessary... I just use it for the locks anyway. Thank you for your reply, Steve Quote Link to comment Share on other sites More sharing options...
HLS30-08077 Posted May 24, 2017 Author Share Posted May 24, 2017 What I really want is to not need keys at all. I want the doors to unlock when I get close to the car and lock when I walk away. I don't need the alarm so I could remove it if necessary... I just use it for the locks anyway. Thank you for your reply, Steve The RFID version would be the one you want then. It can control the door locks (using relays) and also has outputs for light flash and horn (siren) honk. It can be programmed to instantly lock/unlock the doors and enable/disable the button at the same time. Quote Link to comment Share on other sites More sharing options...
snell1884 Posted May 24, 2017 Share Posted May 24, 2017 Thanks Dan! I sent a PM Quote Link to comment Share on other sites More sharing options...
chaos Posted June 23, 2017 Share Posted June 23, 2017 Just tossing it out there, thanks for all the awesome stuff Dave, I love the products you make. Quote Link to comment Share on other sites More sharing options...
unterbergamotten3 Posted July 4, 2017 Share Posted July 4, 2017 Hi. Can you help with a set-up for push button start, power windows and power locks? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.