Jump to content
HybridZ

what should i have in my own garage?


Guest ON3GO

Recommended Posts

Hey guys, im trying to figure out what i need to stock up on and get for my garage im gonna have in Texas.

its small but enough for me, plus im just happy i can afford it.

its 20'x10', and 8 feet high.

with the Z in there ill have enough room for a small bench and etc.

so what should i get thats not alot of money, like tools, shops stuff, etc.

any ideas?

 

thanks

 

mike

Link to comment
Share on other sites

1)Four of the tallest jack(6 ton) stands you can afford.

2)A good 2.5 ton floor jack

3)solid bench with at least a 6" vice

4) 6" bench grinder with a wire wheel on one side

5)Push broom and dust pan

6) hand broom for cleaning off your workbench area

7) all basic metric hand tools

Link to comment
Share on other sites

I had to leave earlier so I couldn`t complete my list.

 

8)2 flourescent drop lights.

9) four 4' flourescent overhead lights.

10)a complete set of screwdrivers including torx drivers

11) a very good utility knife

12) gasket scraper

13) a minimum of 5 gal air compressor

14)an assortment of air tools, impact gun,ratchet,butterfly,die grinder,and blow gun

15)sawzall

16) cordless drill

17)an assortment of vice grips

18)adjustable wrenches

19)various types and sizes of pliers

20) channel locks

 

That should be a good start :wink:

This is a basic rundown of the tools I had when my garage was 19x10. I would also suggest putting up shelves on both sides. they should be about 12" above your head so there is no risk of running into one.

Get some large hooks to hang all of your jackstands and large tools on the wall. This will save your floor space, and make it real easy to sweap up.

Link to comment
Share on other sites

Guest Thurem

I want to live in my garage, and I want a warning system for when the wife is on her way there. Tons of tools, wet bar, loud music, posters with naked chicks, lift, welder, lazyboys, shower, cool bikes and cool cars....

Link to comment
Share on other sites

A stage with gold pole, complete with the required Performance artists... :D

 

My wife wouldn't let me install mine, so you MUST! :lol:

 

Denny pretty much covered it all, and get a GOOD hand grinder with 4 inch wheel, and a GOOD cordless screw driver/ gun.

 

All the others had good suggestions too, ESPECIALLY the radio!

Mike

Link to comment
Share on other sites

man this garage is small guys. lol... im living in an apartment now.

ill tell you what i have,

First aid kit.

Nice size Fan.

Some tools, i cant take all my dads tools.

small but nice size bench.

vice.

Shop towels and rags.

radio.

a Drop light and another reg light.

jack and jack stands.

cooler for drinks.

and some rubbermade draws.

Link to comment
Share on other sites

Guest rick458

get a good set of metric and standard sockets like a 120 piece craftsman,

good sets of standard and metric wrenches, real good screwdriver set,

and trade the nice fan for a big mother, ten minutes of wrenching in Houston and you will be wringing wet. (ask me how I know) :flamedevil:

Link to comment
Share on other sites

man this garage is small guys. lol... im living in an apartment now.

 

If you`ll look in my previous post, I stataed that ALL(plus an engine hoist and stand) of these are things that I had in my garage when it was 19x10.

 

This is the reason for shelves placed overhead on both sides of the garage.

 

You will have plenty of room for storage that doesn`t interfere with your workspace.

 

My list of required tools for a larger garage would be MUCH longer. My garage now is 32x62 and I`ve barely scraped the surface of the tools that I have.(and still don`t have everything I need :roll: )

Link to comment
Share on other sites

  • 1 month later...

well guys i know this is a old post but i wanted to ask you guys a question..

what size bench you think would be good?

im figuring a 6 foot bench, but how deep? remember its only 20 feet long and 10 feet wide, and i need to have some room to work on my Z. i cant work on it outside.

also how high should the bench be? im 5'8", but is there a given rule to how high a bench should be to your height?

 

thanks

 

mike

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...