zliminator Posted January 14, 2007 Share Posted January 14, 2007 I probably coulda done a search. Dan Quote Link to comment Share on other sites More sharing options...
Sparks280zt Posted January 14, 2007 Share Posted January 14, 2007 As far as I know, no, its to tall. Quote Link to comment Share on other sites More sharing options...
jdizzy204 Posted January 14, 2007 Share Posted January 14, 2007 if put in stock location it will hit the hood but the hood will close. Quote Link to comment Share on other sites More sharing options...
Tony D Posted January 15, 2007 Share Posted January 15, 2007 Until my buddy drove his 73 out form Deleware two years ago, I would have said "No" as well! They will fit, but like stated, leaving the hood on the safety catch will keep anything from hitting or rubbing at all (and helps cooling!) His didn't hit, but I think the filler neck looked odd, so it may have been 'altered' by a previous owner. Quote Link to comment Share on other sites More sharing options...
steveosupremeo Posted January 16, 2007 Share Posted January 16, 2007 i put one in my 77, just had to redrill the mounting holes in the radiator side tabs a little higher so it would sit a little lower, i think it was 1/2 or 3/4 of an inch, been a while now. Quote Link to comment Share on other sites More sharing options...
JMortensen Posted January 16, 2007 Share Posted January 16, 2007 i put one in my 77, just had to redrill the mounting holes in the radiator side tabs a little higher so it would sit a little lower, i think it was 1/2 or 3/4 of an inch, been a while now. I did the same. I think I might have had to trim the mounting flange a bit. It did hang down below the core support. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.