aziza z Posted June 8, 2007 Author Share Posted June 8, 2007 I've heard (and somebody correct me if i'm wrong) that the horizontal distance isnt always the same from one z to the other and thats why the stock piece was made in 3 pieces. Jon thats why this cf panel isnt a one piece. It still uses the stock middle piece. Quote Link to comment Share on other sites More sharing options...
aziza z Posted June 8, 2007 Author Share Posted June 8, 2007 Guy's it looks like it's made in one piece, but it's not wide enough to fit. If I understood correctly from what aziza z posted earlier, it installs using the stock center piece. Bart is right. it installs using the stock center piece. The custom tail light panels will be cut in half for you already but the center where the tail light would originally go will still be there for you to mod to ur liking. if steve were to make a "one piece version" it wouldnt fit as well because all cars a diffrent. Plus he would have to start all over and make another mold. Quote Link to comment Share on other sites More sharing options...
New-to-240z Posted June 10, 2007 Share Posted June 10, 2007 count me in on one too!!! I'm dieing to get one of these Quote Link to comment Share on other sites More sharing options...
ktm Posted June 11, 2007 Share Posted June 11, 2007 Count me in as well. I commented on them at Justin's house and really liked the look of them. Quote Link to comment Share on other sites More sharing options...
jknc90 Posted July 9, 2007 Share Posted July 9, 2007 Has this thread died like most of the other CF threads??? Quote Link to comment Share on other sites More sharing options...
greenmonster80 Posted July 10, 2007 Share Posted July 10, 2007 Also looking for this panel. Would be able to supply my own carbon fiber if that helps... Quote Link to comment Share on other sites More sharing options...
aziza z Posted July 10, 2007 Author Share Posted July 10, 2007 Has this thread died like most of the other CF threads??? no it hasnt. He is making a few more molds so that he can make more of them faster. Said he should have the first batch soon. dont worry. Ill keep u guys posted. Like i said. this takes time. Quote Link to comment Share on other sites More sharing options...
jknc90 Posted July 10, 2007 Share Posted July 10, 2007 ok thanks. I was just wondering since it had been about a month Quote Link to comment Share on other sites More sharing options...
aziza z Posted July 10, 2007 Author Share Posted July 10, 2007 ok thanks. I was just wondering since it had been about a month yea its taking longer than expected but he should have them soon. dont want to rush into stuff like this (quality will suffer, and people wont get what they order blah blah blah). you know how it goes. Whens hes ready you guys will be the first to know. Quote Link to comment Share on other sites More sharing options...
jknc90 Posted July 10, 2007 Share Posted July 10, 2007 sounds good. thanks again Quote Link to comment Share on other sites More sharing options...
WizardBlack Posted July 11, 2007 Share Posted July 11, 2007 Would you mind telling a guy who is a nooblet to old fairlady's what duckbill spoiler that is? Great looking car, BTW. EDIT: Also, I know sheets of carbon are pretty easy to make by comparison. I also know that some people use an adhesive method to replace their floorpans. Any thoughts on a set of floorpans made of THICK carbon fiber that is bonded in; perhaps with a few stainless steel "spines" for extra rigidity? Carbon fenders? Headlight buckets? Oh my.... Quote Link to comment Share on other sites More sharing options...
greenmonster80 Posted July 23, 2007 Share Posted July 23, 2007 thats why this cf panel isnt a one piece. It still uses the stock middle piece. Would it be possible for a stock middle piece to be made. This way the replacement CF panel is just like the factory one. 3 pieces. Also any new news on availablity Quote Link to comment Share on other sites More sharing options...
aziza z Posted July 23, 2007 Author Share Posted July 23, 2007 Would it be possible for a stock middle piece to be made. This way the replacement CF panel is just like the factory one. 3 pieces. Also any new news on availablity it is just like the factory one. I dont think theres any point to have the center in cf, its behind the licence anyway. Still in the process of being made. Quote Link to comment Share on other sites More sharing options...
mrpratt Posted July 23, 2007 Share Posted July 23, 2007 I am in, please let me know when they are ready Quote Link to comment Share on other sites More sharing options...
aziza z Posted July 24, 2007 Author Share Posted July 24, 2007 I am in, please let me know when they are ready will do. Quote Link to comment Share on other sites More sharing options...
Curry Posted July 24, 2007 Share Posted July 24, 2007 Very nice piece, i'm gonna have to jump in as well. =D Quote Link to comment Share on other sites More sharing options...
speedgato Posted July 27, 2007 Share Posted July 27, 2007 Count me in. Do you have an E.T.A? Quote Link to comment Share on other sites More sharing options...
greenmonster80 Posted August 6, 2007 Share Posted August 6, 2007 I find myself rushing thru Hybrid forums trying to get to this thread to see if they are ready yet. Feel like a junky without a fix. I have a very specific CF weave that I want to use and I cannot wait for the molds to be finished. Obviously I have to wait...I am giddy with anticipation. Quote Link to comment Share on other sites More sharing options...
Jankyvictor Posted August 6, 2007 Share Posted August 6, 2007 Interested Too! Can you PM when 1 is available? Quote Link to comment Share on other sites More sharing options...
aziza z Posted August 6, 2007 Author Share Posted August 6, 2007 will let you guys know. I spoke with him the other day and he said hes been side tracked by other projects lately but they will be done soon. ill keep you guys posted. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.