240Z2NV Posted April 16, 2008 Share Posted April 16, 2008 I have some pics of a piece that I would love replicated. Problem is, any fabrication shop that uses CNC and computerized programming either needs a huge minimum order, or wants a King's Ransom for just a couple of pieces. AZ Z Car chooses not to sell this part separately. Another Hybrider has made the piece; but, they aren't active here much and I'd prefer to deal with someone else. I sincerely believe that if any of you were to replicate the piece, there would likely be a demand of at least two dozen pieces [or more if 'marketed' elsewhere like eBay or ClassicZcars]. Each car needs two to four pieces per application. It is the sort of thing that one would work on in 'off-hours' to design, then possibly machine on their lunchbreak...... ? Quote Link to comment Share on other sites More sharing options...
Tibby Posted April 16, 2008 Share Posted April 16, 2008 If you can get good (0.00x") mesurements I can see what I can do. Our typical shop rates are $45/hour + mats. Depending on what you need made it may or may not be a good idea. Most of the money goes into drawing and setup so if you can do the drawing yourself we can transfer it to the comp with little effort. PM me some details and I'll see if I can get a quote for you. Quote Link to comment Share on other sites More sharing options...
blueovalz Posted April 16, 2008 Share Posted April 16, 2008 Quote Link to comment Share on other sites More sharing options...
240Z2NV Posted April 18, 2008 Author Share Posted April 18, 2008 PMs sent. Thanks... Quote Link to comment Share on other sites More sharing options...
Oleh Posted April 24, 2008 Share Posted April 24, 2008 pm me with what you need Quote Link to comment Share on other sites More sharing options...
HICKL Posted April 24, 2008 Share Posted April 24, 2008 If you haven't gotten what you are looking for, send me some details and I will see what I can do. Jeff Quote Link to comment Share on other sites More sharing options...
MoNkEyT88 Posted April 24, 2008 Share Posted April 24, 2008 Have you thought of/tried Emachineshop.com? Quote Link to comment Share on other sites More sharing options...
HoustonZ Posted April 24, 2008 Share Posted April 24, 2008 Emachineshop is worthless. Quote Link to comment Share on other sites More sharing options...
rudypoochris Posted April 24, 2008 Share Posted April 24, 2008 Emachineshop is worthless. Is it? I am contemplating using their CNC bending stuff. Quote Link to comment Share on other sites More sharing options...
HoustonZ Posted April 26, 2008 Share Posted April 26, 2008 I should have been more specific. It was their mill and lathe services I was referring to. Not sure about bending. Quote Link to comment Share on other sites More sharing options...
savageskaterkid Posted April 26, 2008 Share Posted April 26, 2008 If this isn't done yet, send me a PM Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.