ToplessZ

Has anyone gotten this completed yet. What was your total cost. And does anyone have any of the parts needed to do this conversion that they wont be using. Such as harness injectors intake etc. I think Im going to go this route. Lets hear some feedback...

i like turbo cities dual tbi Intake thats not the crossfire. They arent producing it but I think I could copy it. Wouldnt I want to run smaller tbi units like two v6 units instead of two v8 units. The holley tbi's for v6's are 400 cfm Im thinking 800 cfm would be plenty for my 383 even if it was hopped up quite a bit. Any ideas?

Sorry about the extra info Ill save it for another post. Still want some more opinion I think the dual tbi's would be pretty cool just have to get an adaptor. And a dual quad intake right. If I went that route I could just splice the harness and hook up the extra throttle body and hopefully find a way to get some tuning done. I dont know what I would do for a chip though. Would love to get some more input guys

no no thats not the cam I would use of course. That is the cam the guy on ebay was running with his chip had. I was saying I wanted to do that type of upgrade or at least similar. Wanted input on that chip and on what I wanted to do.

alrighty someone here has to have an idea of what im trying to do. Am I nuts. I was thinking running the 454 throttle body with some vortech heads with the holley throttle body adaptor and a chip. Not sure what intake. Can I run the 454 throttle body on the 350 tbi harness with a chip? Or do you guys just not like my idea at all and think I should spend the big bucks?

Deleted

Hey s30z or anyone else that has seen this topic http://www.hybridz.org/phpBB2/viewtopic.php?t=19323 Where could I find thta same grill mesh.

common guys I know you are just bubbling with advice and information. What should I do here (my present state of poorness in consideration)

looks expensive. Any idea on costs. Any more input guys....got my motor mounts today for 18 bucks total woohoo

Alright my friend has a chevy blazer with a 383 installed in it. It has a good bit of power for what it is. I think it was all pretty low line using stock type heads and crank. The only problem I see is it has a tbi fuel injection system I dont know what car or truck it is from but I believe it is relativly stock. I dont think its really what the engine needs but I want fuel injection and want to know if I can upgrade this cheaply. I thought of the lt1 intake conversion but I dont know if I could use the wiring harness and computer I would have already. MOney is a big issue so what about a 454 throttle body and a chip or something. Id say my engine is built for 375 hp right now thats about it. I just found this http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=2408616225&category=6770 The chip was tuned for the following engine specifications: Sbc 383 cid stroker kit, aluminum heads, 454 throttle body 2â€bores, holley ported adapter plate, weiand single plane alum. Intake, 65lb injectors, walbro 255 fuel pump, mallory fuel regulator, comp cam 0.447/0.462 lift, 210int and 218exh. @50, headers c/w 2.5â€diameter dual exhaust, borla mufflers. 10.4:1 compression. Rotating assembly balanced to 0.5gram, open element air cleaner, 165f thermostat. 92-93 octane fuel Thanks for as much info as possible...opinions are great too.

just future planning right now thats always free

Hey cool info grumpy. Think that will fit under a z hood. Not a bad price for what you are getting either.

hey dont be such a tease I wanna see that picture....

Well this deal unfortunatly fell through To bad it was right along my alley too. I bid up to 400 dollars and it ended up going for 675 which if it had had lower miles on it and a good body I would have payed in a flash but it ended up just being a fair price. Im really broke and I live in ohio so Im having a horrible time finding a donar car. I will probably make a post along those lines but feel free to reply here or pm me. Thanks

ok looks like I need an electric motor and a pump can I go with a 110v say 3 watt motor and someone help me find a cheap pump please. Will I need anything else. Im really pushing the finances and I need an air compressor for a paint job and maybe some tools in the future.

Is it supposed to have a throttle position sensor? And what should I pay for one in good shape. Thanks

the police package woudlnt come with a 305 would it. I dont know how to tell. Ill have to re look tommorrow thanks

Please send any comments my way asap as I would be bidding on the car at an auction tommorrow morning and I want to think about this a little first thanks again guys

hey s30z are you gonna post those pics. Also what did you use for the mesh material and where did you get it. Thanks

Can I buy a head unit for an air compressor tank somewhere i have a 60 gallon cambell hausfeild tank with not compressor on top. What are my opotions and sources thanks guys

Is a 91 or 92 caprice running donar car a good idea for a couple hundred bucks. She runs and drives great. Any opinions or comments would be great I also need to know about upgradeability with the tbi injection unit. Thanks guys

Do I need the throttle body from the sr20 240sx or from the ka24de thanks agian

what about this radiator http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=2407582103&category=33602

Well cant say my experience was great either getting booted every couple minutes. I never did get a reply to my post on that. Oh well still love the board its only a chat room

check this post http://www.hybridz.org/phpBB2/viewtopic.php?t=18258