Jump to content
HybridZ

beon

Members
  • Posts

    14
  • Joined

  • Last visited

Everything posted by beon

  1. Should arrive on the 26th. Hopefully will be able to have more fun soon with my car.
  2. What about comparison for the suspension from the 260z to the 280z? It's an early 260 so it's very much like the 240z, but unaware of differences..
  3. What would be the solution?
  4. So all refurbished, this should be a very nice upgrade for my early 74 260z with a v8? Thanks for the info!
  5. Hi Guys I am about to purchase a complete rear end setup from a 1978 280z. The owner claims the car was a manual, and I'm needing to know how to identify that the car really was a manual. I know that if the car was truly a manual, then the rear end is indeed a R200. Any tips or identifiers on the rear end or the car being a manual is much appreciated. I've listed a link where I sourced the majority of my info. http://forums.hybridz.org/topic/49194-differential-cv-lsd-hp-torque-r160-r180-r200-r230-diff-mount/ Thanks, Ben
  6. Pics attached: Blue = when bought from Bill. Black = current/ repainting original color.
  7. Photos can be seen via the link below. I've attached two pics which show the car as it was on the day I purchased, and how it sits now. The car has been almost completely restomodded less completion of the paint, EFI, audio, and A/C. Pics tell the story. https://www.facebook.com/media/set/?set=a.2907404131179&type=1&l=a396af60a3 1974 260z JTR v8 SwapContributors: You (owner) and Bruce Kraft Updated about 8 months ago PublicFriends of ContributorsContributors Only Car: Early(January)1974 Datsun 260 Original Paint Code 305 : Light Blue Metallic. Or Possibly 307 Pacific Blue Metallic Replaced Floor Pans Added sub-frame connectors (Pete's Design) Suspension: Tokico Blue Shocks in front Koni Adjustables in Rear MSA Lowering Springs Urethane Bushings throughout MSA Sway Bar Kit Camber Adjustment Kit on front and rear Engine: Early High Nickel 350 Chevy Block (Less than 2,000 Miles on rebuild) Bored .030 over / Complete Machine Work Completed at Lucito's Machine here in town(No - Cracks) Edelbrock RPM Aluminum Heads & Intake Summit Alum Valve Covers Alum 1.5 Roller Rockers Edelbrock 400 Cam Edelbrock 600 Carb Summit Pistons Alum Water Pump MSD Distributor/8.5 Wires/Blaster 3 Coil High Volume Oil Pump Shorty Headers Brand New JTR (Z28) Radiator W/ Custom built shroud & custom upper radiator hose Custom Dual Exhaust / Magnaflow Mufflers Est 300+HP/~400Tq Trans: World Class T-5 Hardened Cobra (Mustang) Gear set (from TheGearBox.org) Completely rebuilt, everything is new, Bearings/Syncros everything. New RAM Pressure Plate and Flywheel New Tilton Master and Hydraulic Slave Hurst Shifter Brakes: New Master Cylinder New Vaccum Booster!!! Toyota 4 Piston Brake conversion up front Rear-end: R180 Rear open Diff Wheels: Rota Rb in front 17x7.5 and Rb-R in rear 17x8.5 Other: RX-7 Seats Painless Wiring Harness RCI Fuel Cell Have most interior pieces Have NEW grey carpet set Bolt In (4point) Roll Bar Full Set of AutoMeter Phantoms Gauges (Speedo/Tach/Vac/Oil/Temp/Fuel) Oil Pressure Gauge is wired w/ copper from gauge to motor many more other parts for the car including some A/C parts
  8. I have one. PM'd http://forums.hybridz.org/topic/119721-steering-wheel-for-1973-240z-original-untouched/
  9. http://forums.hybridz.org/topic/119721-steering-wheel-for-1973-240z-original-untouched/
  10. Car is down, need to install the parking brake cable, tune up, and install dynamat.

  11. Molded/rounded 2x4 and had help pushing it back and forth. Can use that or a wooden baseball bat. Works great!
  12. parts for sale http://tulsa.craigslist.org/pts/4479233883.html car for sale http://tulsa.craigslist.org/cto/4434578476.html
  13. beon

    240z hatch

    Updated Price. PM if interested 1971 240z parts rear deck lid/ hatch with louvers $250 together or $200 and $50 respectively.
  14. Have all of the below. PM'd. Steering wheel. Factory wooden wheel and horn. Door pulls (the rubber strap things) Window cranks
  15. Sent a PM for the hatch louvers
  16. Check out the album. We cut out the floor, replaced with 18 gauge steel, and made custom brackets. They are RX-8 seats and I plan on having them recovered. With the bumpers, I'm going to straighten them out (get rid of the dings) and paint them a dark grey.
  17. I'm the guy who bought Bill's Z. Link below for the progress. Working on getting the bumpers I sourced from a 73 240z fixed and fitted, installing a parking brake, finishing the interior, some wiring, and some tuning. Last thing will be repaint the current color. https://www.facebook.com/media/set/?set=a.2907404131179&type=1&l=a396af60a3
  18. I used a molded/carved 2x4 and rolled it back and forth to roll the wheel wells. That or a wooden baseball bat would work great.
  19. Like the progress pics. I need to make one of mine. Have tons of pics.
  20. beon

    240z hatch

    I have a 71 hatch with louvers, good shape, and located in Tulsa, OK. LMK. email benkraft1@gmail.com
  21. rota rb 17x7.5 in front w 4 offset 225/45/17 rbr 17x8.5 in the rear w 20 offset 245/45/17 works perfect with lip rolled
×
×
  • Create New...