manninen

today i received these control arms. Seems decent quality, 4.8kg weight, can be used with stock rubber inner bushings. PU bushings which came installed seems to be softer than energy suspension bushings i had. Outer bushings are tight fit, couldn´t take them off by two fingers. Here´s my only alignment sheet i´ve done. i dont know if left toe comes from worn PU bushings. rear toe might be leveled between left/right by just moving transverse links, cant remember how loose their holes were. Here´s quite similar stuff to 240Z, about toe perspective. I think im going with 2mm toe-in on both axles

Yes that suspension conversion looks good but i think im not going with uniballs just yet. https://i.imgur.com/kyOuN1a.mp4 my PU bushings wasnt long joy so im ditching all PU bushings places where is larger movement going on

About the suspension, i have bmw limited slip diff, its now hooked to mustache bar. Why not combine mustache bar to transverse links, stock 3part to one part system With this it might be road legal issue here in finland so i have to think about it is it flexing 17:30? Okay these are my thoughts this time

With this one i might gone too far but yeah, orange spots being mustache bar bolts and those four dots, was it four M8 or M10 holding whole rear suspension from rear together. Seems legit, heard no one breaking those though

I believe those black lines being strongest part on firewall. So this might be good design start to evolve, tube bolted to firewall and something between those.

Okay long story short, ive had this car since 2011. can achieve 37mpg, reliable and rather stock exterior. S30 body aint designed for low end torque and i can feel something going on, yea sure its best to bring whole body apart and do an rollgage. So strut bars to front and back and lets talk about that rear suspension, there might be something which could to better engine bay i took shape from the hood so i can see clearences, there is some room.

[ 185/80R14 with 6x14 ET15 rims Daaamn is much better ride than ET0, lighter to turn and does not wander around on bad roads

15X7 ET0 ansen´s with 195/65R15 tyres. Lately been looking for 14", maybe 175R14 or 215/65R14 Imagewheels custom specs or volk te37v 7,5" et6, anybody know if those small volks will fit on 240z?

https://dl.dropboxusercontent.com/u/33080121/auto/2013-01-01%2012.00.38.jpg just got these in, so much higher than original, at least electric one. passenger seat is flat bottom, but drivers seat harder to solve without +4cm spacers

New here, registered two weeks ago. did one post and remembered here was some sort of update going on. today noticed i have no account and post what i made is gone. is it ordinary for newbies here?