Scott_M67

PM on Mustache bar

PM sent.

PM and pics sent.

WTB a set of core rocker arms, willing to go $20-$25 on them. TIA, Scott

Isn't it the same as a 280z fuel pump bracket, PM sent.

I'm glad they will work out, good luck with the project. Cheers, Scott

Awesome job man, all that hard work really paid off.

Set you a PM.

I would also like to remind you that you are dealing with some pretty nasty chemicals when using polyisocyanates paints. A charcoal respirator will not be effective against isocyanates when using polyisocyanates paints. I always use a fresh air supplied mask wear a full suit when spraying. Your exposed skin and eyes absorb the isocyanate vapor as well and need to be covered.

I can cut those two sides out of '77 280z that is rust free in that area. Let me know how much of that area you need. How about $40 plus shipping.

That is some cheap paint, any idea on how it covers. I'd use an epoxy sealer as a first coat, before you apply your blocking primer. The best epoxy primer for the money is Southern Polyurethanes, same goes for their high build primers and clears, and they have 7 day tech support. I'd recommend a good water trap or a dessicant snake hose for a one time paint job. Use some high quality tack cloths, you'll need about a dozen. Also sandpaper can add about $80-$100 to your project, depends on how many times you block it, if you have to sand it before clearing to get rid of any junk in it, and then sand the clear before you buff it.

Just curious, are the spacers stamped with a letter or are they a certain given length? TIA

I don't believe that the advertisement was for solicitations from the "Peanut Gallery."

Hey does anyone have an AZ Car Billet Mustache bar that they aren't going to use and would like to sell? TIA

ttt.

I think I can do that, I have some pics waiting for you. Scott

How much of it do you need, cut from where to where?

Still looking for some core rockers.

Just be be clear, you want an "aftermarket" flat top and not a stock piston with a dish?

PM sent, pics will be on the way. Scott

Looking to buy some used/core L-series rocker arms, PM me. Thanks.

I'm starting to look around for an aftermarket engine management system like a SDS EM-3,4 or maybe Haltech unit. If anyone is thinking about selling one it excellent condition let me know. TIA, Scott

Are they different from a 280z? I have all the parts from a '77.

Sorry, my bad Jon, I was talking on the phone and typing at the same time.

Thanks Jim, the guy just dropped the diff out so it should be easy to check out, I'm just curious about the cover not being finned. I probably wouldn't bother with the expense of using the finned cover if it had one anyway.