PR280z Posted July 19, 2015 Share Posted July 19, 2015 Its this kit or the JAG/LINCOLN kit for E-BRAKE option. I need brakes ASAP! Quote Link to comment Share on other sites More sharing options...
loy Posted July 19, 2015 Share Posted July 19, 2015 This is a kit. Not sure if brake cable is ready yet. Quote Link to comment Share on other sites More sharing options...
PR280z Posted July 19, 2015 Share Posted July 19, 2015 Loy, your right. The other is just a bracket kit and you sort out your own brakes. Whats going on with the EBrakes with TTT? Quote Link to comment Share on other sites More sharing options...
loy Posted July 19, 2015 Share Posted July 19, 2015 Still waiting for the cable. Calipers and bracket are ready. Quote Link to comment Share on other sites More sharing options...
PR280z Posted July 19, 2015 Share Posted July 19, 2015 I have the Zx rears and the toyo fronts.I`m just tiered of the leaking pistons and also want more stopping power. I`m looking at 200. 300.for remanf calipers and continue with less breaking power or go big with the TTT and no worries for some time. I`ll get in contact with them tomorrow. Quote Link to comment Share on other sites More sharing options...
Chris Duncan Posted July 19, 2015 Share Posted July 19, 2015 If you are running a solid disc then why do you need 4 pistons? The Z32 came out in 1989 with a vented 11.75" rotor and a 2 piston aluminum caliper. Quote Link to comment Share on other sites More sharing options...
PR280z Posted July 19, 2015 Share Posted July 19, 2015 I'm running the early79 caliper. Don't think the 300zx caliper fits this bracket. Quote Link to comment Share on other sites More sharing options...
PR280z Posted July 23, 2015 Share Posted July 23, 2015 Just ordered from TTT, Looking forward to more stopping power. Quote Link to comment Share on other sites More sharing options...
jmhtx Posted July 24, 2015 Share Posted July 24, 2015 Any feedback on these? Looking to covert over to Wilwood front and rear and these look like the best of the rear brakes. I assume most folks are using the Wilwood 1" or 280z 15/16 Master Cylinder. Any proportioning valve? Quote Link to comment Share on other sites More sharing options...
kona41 Posted August 15, 2015 Share Posted August 15, 2015 Ok so I got the template and checked the wheels.- Work Meister CR01 15x10 -53 The corner of the template just ,,,,just touches the barrel of the wheel. Any one got these on this wheel? The car pictured on the website shows work meisters. Ready to order. Quote Link to comment Share on other sites More sharing options...
loy Posted August 18, 2015 Share Posted August 18, 2015 E-brake cables just got shipped out! Quote Link to comment Share on other sites More sharing options...
OldAndyAndTheSea Posted October 15, 2015 Share Posted October 15, 2015 (edited) Figured I'd update this as it seems to have lost steam. I installed my rear brake kit tonight. Simple. Would recommend. The E-brake setup, once I got it adjusted, works very well. Happy with the kit as a whole. Wilwood stuff is really user friendly. Here are some random pictures of the e-brake setup on my car. Have yet to report on performance, as my car hasn't seen the road in some time now. Soon to change, though. Edited October 15, 2015 by OldAndyAndTheSea Quote Link to comment Share on other sites More sharing options...
NCchris Posted October 22, 2015 Share Posted October 22, 2015 (edited) Figured I'd update this as it seems to have lost steam. I installed my rear brake kit tonight. Simple. Would recommend. The E-brake setup, once I got it adjusted, works very well. Happy with the kit as a whole. Wilwood stuff is really user friendly. Happy to hear this, ordered my set last night. chris Edited October 22, 2015 by NCchris Quote Link to comment Share on other sites More sharing options...
Jpaynesae1991 Posted December 29, 2015 Share Posted December 29, 2015 Sorry to bump the thread. Can anyone confirm that these will fit Rota Shakotan 15x9 +0 rims? Pictures? Quote Link to comment Share on other sites More sharing options...
JustAFantaZ Posted January 10, 2016 Share Posted January 10, 2016 Does anyone think this kit would work with Will Fritt's Ford 8.8 IRS diff kit, in place of the Wilwood 12.2" rotors? I have need of an e-brake and use 15x8 Weld Draglites with lots of negative backspacing. Quote Link to comment Share on other sites More sharing options...
Gaiden_08 Posted January 17, 2016 Share Posted January 17, 2016 I have a 72 240Z Shell, literally a blank slate. I have stock struts for the car but I have really been against putting them back on the car. When done, I plan on this car being an absolute street machine/vette killer. With that in mind, I have been researching what will be the best way to spend my money ensuring that I can put all of my power down to the street and how I stop it all too. I just found T3 through this thread, and I was thinking about ordering the AZC track pack kit, but I think I have changed my mind! T3 products look awesome, great branding, and from what I have read looks like they perform just as well. I am gonna call them soon. If anyone is using their coil over kits I would be very interested to hear about your experience with them! Thanks Quote Link to comment Share on other sites More sharing options...
kona41 Posted February 12, 2016 Share Posted February 12, 2016 So mine have arrived (last fall) along with the fronts and ....well basically the rest of the TTT suspension suite. Just finding time to install it all. Stance coilovers are being welded in 2 weekends, and then it should all start coming together. cannot wait to get on the binders . TTT s product -pictures do not do it justice. It is all so beautiful. Quote Link to comment Share on other sites More sharing options...
jschiff_g8 Posted April 4, 2016 Share Posted April 4, 2016 Alright so I installed the big brake kits front and rear from t3 and they fit and look beautiful!!! E-brake function works perfect! Only problem im having is that my pedal goes to the floor on the first push and then gets pressure on the second and so on. I think i still migh have air in the system, so i will rebleed the master and all four corners. When the brakes did grab they felt amazing haha. I have absolutely zero clearance issues. I took some pictures with the wheels on: These are xxr 531's 16x9 with 0 offset Quote Link to comment Share on other sites More sharing options...
Soundguy Posted April 4, 2016 Share Posted April 4, 2016 Oh good to know ! I'm still thinking about this t3 brake kit . The only reason why I have put on hold , I picked up a 350z last fall to play with . Quote Link to comment Share on other sites More sharing options...
jmhtx Posted April 4, 2016 Share Posted April 4, 2016 Alright so I installed the big brake kits front and rear from t3 and they fit and look beautiful!!! E-brake function works perfect! Only problem im having is that my pedal goes to the floor on the first push and then gets pressure on the second and so on. I think i still migh have air in the system, so i will rebleed the master and all four corners. When the brakes did grab they felt amazing haha. I have absolutely zero clearance issues. I took some pictures with the wheels on: These are xxr 531's 16x9 with 0 offset Out of curiosity what Master Cylinder are you using? What about the Brake Booster? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.