awd92gsx Posted February 25, 2002 Share Posted February 25, 2002 Stony, I got your email, but am having problems opening it up with my Win XP machine...I'll have to try downloading it on my Win 98 laptop and doing something with it then...thanks!! Quote Link to comment Share on other sites More sharing options...
Guest Anonymous Posted April 16, 2002 Share Posted April 16, 2002 Quote Link to comment Share on other sites More sharing options...
BLKMGK Posted April 16, 2002 Share Posted April 16, 2002 BTW - with regards to the 2JZ swap - there's a single turbo CAST manifold that's MUCH cheaper than the tubular ones. Supposedly it won't flow as much but if you're not looking to make 800RWHP it probably would work well. Dunno if it would fit but it's certainly worth a shot. Also - Greddy makes a T78 turbo kit that I'm considering - could be as cheap as $3k if I'm lucky. We'll see Talking to a guy now local who has one and says that turbo, while big, works great with a stick. Should make 500RWHP on pump gas I think:eek: Quote Link to comment Share on other sites More sharing options...
Floorless240z Posted May 3, 2002 Share Posted May 3, 2002 Hey, I was just wondering how I could contact OkinawaImportPerformance. I am looking to do the rb26dett swap into my 240, and it seems like this place is cheaper than the nearest jdm motor supplier to me, in toronto. thanks a lot. Quote Link to comment Share on other sites More sharing options...
Guest Anonymous Posted May 16, 2002 Share Posted May 16, 2002 Stony's car is right hand drive rite? so i was wondering if there are any mods you would need to do to fit the rb26 in a left hand drive car. would you have to relocate the turbo? Quote Link to comment Share on other sites More sharing options...
stony Posted May 16, 2002 Author Share Posted May 16, 2002 my car is a left hand drive us spec z the rb motor fits both us and japan spec z's like it was made for it Quote Link to comment Share on other sites More sharing options...
stony Posted September 27, 2002 Author Share Posted September 27, 2002 Ive been getting alot of how to emails ... i thought id revive this post ;> Quote Link to comment Share on other sites More sharing options...
Bob_H Posted September 27, 2002 Share Posted September 27, 2002 What, its not like your the ONLY guy out there... Well, just you and Cuong. And a few of us in process. BTW I now understand what you had to do to the tranny mount. When I was test fitting the T5, it made sense how it would not fit through. With some of the things I am considering now, that really doesn't matter anymore. Still looking for a engine management I like. Mainly one that can deal with the MAF's. Most of the systems on the market are speed density, like your SDS. 6 on one hand, half a dozen on the other. Don't know what this whole 6 finger thing is.... -Bob Quote Link to comment Share on other sites More sharing options...
Guest Anonymous Posted September 27, 2002 Share Posted September 27, 2002 In the first post you said something like the RB25 is just a bolt up with the z31 mounts. so no fabbing. Or was that in relation to something else? Anyways Does anyone know if/or/any engine mounts that can be used to put an RB30 block into a 260z? Quote Link to comment Share on other sites More sharing options...
stony Posted September 28, 2002 Author Share Posted September 28, 2002 RB25 block bolts up to the rb20 Z31 oil pan and oil pickup with no alterations. the rb30 block is the same as all rbs and you can use the Z31 rb20 engine mounts. but since the rb30 is taller differnt mounts would more then likely be needed since the rb 26 barely clears the hood itself Quote Link to comment Share on other sites More sharing options...
RB26DETT Posted September 28, 2002 Share Posted September 28, 2002 Hi all, i think that all RB engines would need the sumps modified to clear the steering rack. tell me if i'm wrong Stony, ie the RB25DET that you put in your car before the RB26DETT didn't need the sump modified. Quote Link to comment Share on other sites More sharing options...
stony Posted September 28, 2002 Author Share Posted September 28, 2002 the rb20det from the z31 in japan did not need to be modified it is a rear sump. you just take the oil pan and pickup from that motor and bolt it on the rb25 ;> Quote Link to comment Share on other sites More sharing options...
Guest Anonymous Posted September 28, 2002 Share Posted September 28, 2002 does anyone know if it will bolt right onto a rb30 block tho? and if not does the rb30 sump even have to be changed? and as for the hight, id rather mod the bonnet then fab new engine mounts suppose tho lower engine = better weight distro and ballance Quote Link to comment Share on other sites More sharing options...
stony Posted September 28, 2002 Author Share Posted September 28, 2002 ok here you go... get z31 engine mounts, z31 rb20 oil pan and sump and it will bolt in... if the rb30 is coming out of car with rear sump then your good '> Quote Link to comment Share on other sites More sharing options...
Guest Anonymous Posted September 29, 2002 Share Posted September 29, 2002 A Z31 I take it you are talking about an early model 300zx.. In Australia I think they came out here with a 3ltr v6. But it wont be too much trouble to get some sent from Japan. Quote Link to comment Share on other sites More sharing options...
stony Posted September 29, 2002 Author Share Posted September 29, 2002 yes any japan spec z31 with rb20det int it Quote Link to comment Share on other sites More sharing options...
Guest Zpeed Posted October 1, 2002 Share Posted October 1, 2002 anyone know if u can get the Z31 rb20det engine mounts from nissan still or not, and if they do a part # would be great Quote Link to comment Share on other sites More sharing options...
Guest cturbo28 Posted October 8, 2002 Share Posted October 8, 2002 Well, yes I am another person who wants to do this RB26DETT swap. I thought you guys would be interested in this. I am going to try to keep this swap under 5000.00 I hope. I have located a JDM engine importer that will sell everything except intercooler for 4000+ shipping. RB26DETT engine/harness/turbos/5 speed 2wd trans/converted oil pan. Maybe this is true but my buddy lives close and he is going to confirm what I would actually get. www.gspeedcorp.com If anyone has heard anything good or bad about these guys let me know. I also heard that you could use Z32 egine mount without ant mods???? Quote Link to comment Share on other sites More sharing options...
Guest 250z Posted October 8, 2002 Share Posted October 8, 2002 Wow, never new a 200zr existed until now Anyone know a parts number for that oil sump and pick up? I'm guessing the local Nissan dealer has never heard of a z31 200zr and will probably order me a skyline's rb20det oil sump and pick up Quote Link to comment Share on other sites More sharing options...
stony Posted October 8, 2002 Author Share Posted October 8, 2002 No you cannot use the VG or any other mounts they have to be RB20 Z31 engine mounts, or custom mounts. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.