Rimal310 Posted July 8, 2009 Share Posted July 8, 2009 Anyone know where i can pick up a Cannon intake manifold by itself. everyplace i tried only sells it with Tripple Webers. Fedex Thrashed my box and cracked my intake manifold in half!! Thanks in advance. Quote Link to comment Share on other sites More sharing options...
jeffp Posted July 8, 2009 Share Posted July 8, 2009 I bought the manifold a few years back and it has been sitting ever since. Give me a call @ (714) 907-6318 and lets talk. REGARDS: Jeff Priddy Quote Link to comment Share on other sites More sharing options...
Bwales Posted July 12, 2009 Share Posted July 12, 2009 if that doesnt work out i have one too with webbers attached. ill let it go without and keep the carbs for parts if you dont need em. Quote Link to comment Share on other sites More sharing options...
slown280z Posted July 12, 2009 Share Posted July 12, 2009 How bad is it broken? Have you tried seeing if it is repairable? Quote Link to comment Share on other sites More sharing options...
PanzerAce Posted July 12, 2009 Share Posted July 12, 2009 ebay probably has one or two on it right now. Quote Link to comment Share on other sites More sharing options...
johnc Posted July 13, 2009 Share Posted July 13, 2009 Quote Fedex Thrashed my box and cracked my intake manifold in half!! I can probably weld it back together. Post a picture. Quote Link to comment Share on other sites More sharing options...
johnc Posted July 13, 2009 Share Posted July 13, 2009 Found out you can get them new here: http://www.piercemanifolds.com/ But the quality is a bit low. The carb mounting studs are not centered on the port and the mounting flange is off a bit too. Quote Link to comment Share on other sites More sharing options...
JMortensen Posted July 13, 2009 Share Posted July 13, 2009 FYI, if you're going to make a backing plate for an air filter, the carb spacing from the 1-2 and 2-3 carb is different as well, so don't make a nice template for the first two and then flip it, because you'll ruin your good piece of aluminum... Quote Link to comment Share on other sites More sharing options...
Rimal310 Posted July 13, 2009 Author Share Posted July 13, 2009 jeffp said: I bought the manifold a few years back and it has been sitting ever since. Give me a call @ (714) 907-6318 and lets talk. REGARDS: Jeff Priddy Will be Keeping in contact with you...have to see what fedex offers me. Quote Link to comment Share on other sites More sharing options...
Rimal310 Posted July 13, 2009 Author Share Posted July 13, 2009 Bwales said: if that doesnt work out i have one too with webbers attached. ill let it go without and keep the carbs for parts if you dont need em. i will let you know how things work out with Fedex and or Jeff! thanks! Quote Link to comment Share on other sites More sharing options...
Rimal310 Posted July 13, 2009 Author Share Posted July 13, 2009 slown280z said: How bad is it broken?Have you tried seeing if it is repairable? It most likely is repairable but i want to see what FedEx will do for me first. PanzerAce said: ebay probably has one or two on it right now. nothing on ebay Quote Link to comment Share on other sites More sharing options...
Rimal310 Posted July 13, 2009 Author Share Posted July 13, 2009 johnc said: I can probably weld it back together. Post a picture. Will be posting pics soon. johnc said: Found out you can get them new here: http://www.piercemanifolds.com/ But the quality is a bit low. The carb mounting studs are not centered on the port and the mounting flange is off a bit too. this may work if Fedex agrees to pay me full for it! thanks! jmortensen said: FYI, if you're going to make a backing plate for an air filter, the carb spacing from the 1-2 and 2-3 carb is different as well, so don't make a nice template for the first two and then flip it, because you'll ruin your good piece of aluminum... Thanks for the heads up! Quote Link to comment Share on other sites More sharing options...
Tony D Posted July 14, 2009 Share Posted July 14, 2009 They show up regularly on E-Bay for around $200 used... I have welded up some pretty badly broken up manifolds. Likely any settlement from the shipping company (that is not disallowed for 'improper packaging') will more than cover a welder getting it back in one piece, and a machine shop skimcutting and truing the two manifold surfaces back flat in case the welder didn't jig quite as precisely as he should have... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.