Jump to content
HybridZ
Boog

Question about injector impedance, specifically supra ones

Recommended Posts

Boog    0

Hey guys, quick question.

I have an L28ET in my car (with MS) and I am upgrading to supra injectors, the 7mgte ones. From what i have researched, they are 440cc and work with a pallnet 11mm rail, which I just ordered from him. I am confused as to what impedance I need. Here's what I currently believe to be true:

L28ET injectors are low impedance, and require the resistor pack to make them work.

7M-GTE injectors are also low impedance, and should be used in my system with my current resistor pack.

However, all the 7m-gte injectors on eBay (don't worry, not ordering from there) are listed as high impedance. I just don't want to order the wrong injectors, is there anyone who is running the 440cc injectors on an L28ET who can chime in to what their wiring system is? I don't want to order them before I at least have some answer.....There is so much weird and confusing information out there about this stuff.

Thanks in advance!

 

Share this post


Link to post
Share on other sites
turbogrill    0

I think that:

7M-GTE ( 23250-42010) is 440cc and low imp.

1JZ-GTE (23209-49015) is high imp

2JZ-GTE(23209-49025) is high imp

 Call http://www.fuelinjector.citymaker.com/ to be sure. Best place to buy from.

I got a set of high imp injectors for my MS build, less components. But maybe you need more CC than me.

 

Share this post


Link to post
Share on other sites
SRRTz    0

I bought injectors for a 7M-GTE and they're 440cc and low impedance. I tried running them using PWM with no resistor pack and had constant problems. I wired in the stock resistor pack from my '77 and matched the settings in MS and have had no trouble since. 

Share this post


Link to post
Share on other sites
Chickenman    4
On 9/1/2017 at 9:02 AM, NewZed said:

MS has settings for whatever injector you decide to use.

http://www.megamanual.com/v22manual/minj.htm#fb

That's really old and outdated information from the original Bowling an Grippo software and early boards. MSExtra software, is totally different. That's one of the big problems with MS. Too many versions of Hardware, cam be built many different ways and Library of information is very scattered and often misleading to the neophyte.  

Share this post


Link to post
Share on other sites
NewZed    56

The very simple point I was illustrating is that Megasquirt is tuneable to whatever injector he wants to use.  Teaching a man to fish instead of handing him a bunch of fish he doesn't really understand.

Share this post


Link to post
Share on other sites

The OEM 7mgte injectors are 440cc low impedance, some of the aftermarket offerings can kind of go back and forth, I think TLF is a biggish vendor, but they use venom injectors so stay away from those. As chickenman said, buying the injector resistor pack with the injectors would be a good idea. On the supra it is a silver box with fins. Be wary the wires are fairly short so leave yourself quite a bit of room. 

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×