Jump to content


Photo
- - - - -

RB20/25/26/30 Links


  • Please log in to reply
69 replies to this topic

#41 RB26powered74zcar

RB26powered74zcar

    XXXXXX

  • Super Moderators
  • 4482 posts
  • LocationLake Charles, Louisiana, 70605

Posted 05 November 2006 - 04:30 PM

***** Thanks to eh? @ Nico for this info... ****

" I'm surprise I didn't know this but Z32 lifters, retainers and valve collets are the same P/N as RB25's..13231-79S00 LIFTER-VALVE
13210-D4200 COLLET-VALVE SPRING
13209-D4200 RETAINER-VALVE SPRING
Always visually verify it's the same before you buy though."

.

 

 

 

 

 

RB26dettZ pics

 ®

th_April_2012005.jpg


#42 RB26powered74zcar

RB26powered74zcar

    XXXXXX

  • Super Moderators
  • 4482 posts
  • LocationLake Charles, Louisiana, 70605

Posted 10 November 2006 - 05:15 PM

king rod and main bearings MB7008AM STD for mains,
CR6697AM STD rods

*source Nico forums*





:mrgreen:

.

 

 

 

 

 

RB26dettZ pics

 ®

th_April_2012005.jpg


#43 RB26powered74zcar

RB26powered74zcar

    XXXXXX

  • Super Moderators
  • 4482 posts
  • LocationLake Charles, Louisiana, 70605

Posted 10 November 2006 - 05:16 PM

RB motors
king rod and main bearings MB7008AM STD for mains,
CR6697AM STD rods

*source Nico forums*





:mrgreen:

.

 

 

 

 

 

RB26dettZ pics

 ®

th_April_2012005.jpg


#44 Z24O

Z24O

    Member

  • Members
  • PipPipPipPip
  • 283 posts
  • LocationAustralia

Posted 12 November 2006 - 05:09 PM

just skimmed this thread,may have missed it but if not this aussie site is a mine of information...........www.skylinesaustralia.com

#45 RB26powered74zcar

RB26powered74zcar

    XXXXXX

  • Super Moderators
  • 4482 posts
  • LocationLake Charles, Louisiana, 70605

Posted 16 November 2006 - 07:46 PM

*** As taken off Race Bread forums.... ****

" heres the Gates serp belts part #'s
ALT. & W/P # K040347
P/S #K040382
a/c #??? (Im not running a/c on my car)
and you can get these at any local part store that carry Gates products.

.

 

 

 

 

 

RB26dettZ pics

 ®

th_April_2012005.jpg


#46 RB26powered74zcar

RB26powered74zcar

    XXXXXX

  • Super Moderators
  • 4482 posts
  • LocationLake Charles, Louisiana, 70605

Posted 08 December 2006 - 06:14 PM

RB25DET Rear Transmission Seal
OEM Nissan Part #
32136-01G10

.

 

 

 

 

 

RB26dettZ pics

 ®

th_April_2012005.jpg


#47 AMV8(1day)

AMV8(1day)

    Member

  • Members
  • PipPip
  • 34 posts

Posted 23 December 2006 - 02:29 AM

Hows this for RB and other JDM engine sites?

www.passwordJDM.com
www.tigerjapanese.com
www.naganojapanese.com
www.asapmotors.com
www.jspecauto.com
www.jdmsource.com
www.jdmaddiction.com
www.japanpowerinc.com
www.Munleeauto.com
www.nagasakijdmmotors.com
www.enginelandinc.com
www.mckinneymotorsports.com
www.gspeedcorp.com
www.phase2motorsports.com
www.jdm-online.com
www.osakajdmmotors.com
Brakes are for people that haven't yet learned to fly...

#48 triple B

triple B

    Member

  • Members
  • PipPipPipPip
  • 193 posts

Posted 18 January 2007 - 01:21 PM

anybody know of a good place with nice pricing for a greddy style intake and cams and valve springs. and tubular top mount turbo manifold?

i have been looking with little success for stuff that is not outragously priced or kinda chincy lookin
[SIGPIC][/SIGPIC]

The best in the Tri-cities area :burnout:
http://www.myspace.com/empireracingmi


WWW.EMPIRERACING.ORG/F

#49 Booztd 3

Booztd 3

    Member

  • Members
  • PipPipPipPip
  • 353 posts

Posted 26 January 2007 - 07:43 AM

i have been looking with little success for stuff that is not outragously priced or kinda chincy lookin


Fast
Cheap
Reliable


Pick 2.....

#50 george.bryant

george.bryant

    Member

  • Members
  • PipPipPipPip
  • 345 posts

Posted 27 January 2007 - 12:31 AM

There is a great selection of RB related items from New Zealands Internet Auction Site www.trademe.co.nz. If there is anything that anyone would like questions asked for, or to purchase let me know and maybe we can work something out.

Top Mount Turbo Manifold: http://www.trademe.c...on-85664152.htm

Adjustable cam gears:
http://www.trademe.c...on-85710254.htm

Theres often alot of greddy style intake manifolds there, but currently theres nothing.

Aswell as www.skylinesaustralia.com there is also www.skylinesdownunder.com
1984 R30 Skyline, L20ET, RB20DET Turbo, S5 RX7 Intercooler, TCC Work B.O.V., G.F.B. Boost Controller @ 10psi, 2.5" Mandrel Bent 'Zaust, Reconditioned head = HEAPS OF FUN! (When It runs...)

#51 Booztd 3

Booztd 3

    Member

  • Members
  • PipPipPipPip
  • 353 posts

Posted 12 February 2007 - 09:04 PM

Sifted through the posts, does anyone know if the Z32 and RB rear/front main seals are the same? I would also assume if they were the same, that also the cam seals would be the same as well

**Edit- Found out the RB front main seal is the same as a VG30, and the RB cam seals are the same as the VG30. The rear main is NOT the same**

#52 chrism

chrism

    Member

  • Members
  • PipPipPipPip
  • 238 posts
  • LocationZebulon NC

Posted 09 April 2007 - 03:03 PM

Does anyone know what the part number is for the two relays located next to the ECU on the RB20 harness? I have decided to join the swap fray and noticed that they were missing. This was supposed to be a full swap. I guess that does not include relays. But then how does one verify that the engine runs ok before the 30 day warranty runs out. Don’t answer that. I should have used a microscope to look at the pictures online before getting the engine.

#53 neo240

neo240

    Junior Member

  • Members
  • Pip
  • 7 posts
  • Locationsome where dusty in Australia

Posted 24 April 2007 - 12:01 AM

there is a few intresting ideas and info here

http://en.wikipedia....issan_RB_engine
http://www.skylinesa...showtopic=15420
http://www.240z.free...com/custom.html
http://oldholden.com...dex.php/VL_RB30

#54 Guest_jnthn_*

Guest_jnthn_*
  • Guests

Posted 29 April 2007 - 07:56 AM

Hi, I got Nissan Cefiro A31 and its model 1990 RB20 SOHC N/A. I got this distributors problem where the engine running for a while and then turn off when i shift it to R or D (its automatic actually).

Been trying to find the one piece of these parts unfortunately im out of luck. now i found this forums with lots of stories in it about cars.

Maybe one of you guys might want to assist. Ok this is the first post i've made and

im also planning to swap the 1GZ Toyota engine to my Nissan Cefiro because in malaysia i know nissan parts are very difficult to find one to import those thing in huge package we required an approved permit for importations.

Please to hear and Thanks

#55 240Z_Master

240Z_Master

    Member

  • Members
  • PipPipPipPipPipPip
  • 1470 posts
  • LocationOrange County, CA

Posted 13 May 2007 - 06:11 PM

Update!

Right Click Save As... R33 FSM
http://gripjunkies.l...ign.com/R33.pdf

"[Posted Image "
10/70 Datsun 240Z RB25DET with too many goodies to list...


#56 Guest_DevilZwannabe_*

Guest_DevilZwannabe_*
  • Guests

Posted 30 July 2007 - 06:22 PM

So I know it's not a link, but the people at mckinney motorsports replied an email I had involvling the pricing of some of there rb-swap parts and it rapes you as follows:
mount kit (engine and trans) $670.00
driveshaft $500.00,
custom alum radiaotor $550.00
custom intercooler w/alum piping kit $950.00
wiring harness conversion $500.00
custom GReddy intake manifold $950.00 OR Copy intake manifold $700.00
The mount kit is $30 cheaper than advertised, but still $700 after shipping for some, the rest are options that for a lesser metal fabricator like me are almost the only option; the only other benefit is the cleaner install look. my goal of an RB26 swap for 6 large is becoming more of a pipe dream!

#57 Guest_jdm-online.com_*

Guest_jdm-online.com_*
  • Guests

Posted 07 May 2008 - 12:00 PM

So I know it's not a link, but the people at mckinney motorsports replied an email I had involvling the pricing of some of there rb-swap parts and it rapes you as follows:
mount kit (engine and trans) $670.00
driveshaft $500.00,
custom alum radiaotor $550.00
custom intercooler w/alum piping kit $950.00
wiring harness conversion $500.00
custom GReddy intake manifold $950.00 OR Copy intake manifold $700.00
The mount kit is $30 cheaper than advertised, but still $700 after shipping for some, the rest are options that for a lesser metal fabricator like me are almost the only option; the only other benefit is the cleaner install look. my goal of an RB26 swap for 6 large is becoming more of a pipe dream!

We have quite a few RB engines and front clips in stock. Feel free to either go to our website or give us a call at 514.325.1771 should yu have any questions. We also have a 'Live Chat' program available on our website to answer your questions right away.
Thank you,
Andre

#58 240Z_Master

240Z_Master

    Member

  • Members
  • PipPipPipPipPipPip
  • 1470 posts
  • LocationOrange County, CA

Posted 08 October 2008 - 09:51 PM

If no one has seen this yet, I stumbled upon it today.

http://nissan4u.com/

Basically Nissan Fast but accessible online!

"[Posted Image "
10/70 Datsun 240Z RB25DET with too many goodies to list...


#59 kiwi303

kiwi303

    Window licker

  • Members
  • PipPipPipPipPip
  • 748 posts
  • LocationTasman District, Nelson, NZ

Posted 23 February 2009 - 02:49 AM

There is a great selection of RB related items from New Zealands Internet Auction Site www.trademe.co.nz. If there is anything that anyone would like questions asked for, or to purchase let me know and maybe we can work something out.


I noticed this and checked out Georges profile, not active since '07.

If anyone notices something on trademe.co.nz they want, i am willing to consider acting as a NZ agent for you guys.
I wanna go faster!

Sarcasm, among other things, can be hard to detect over the internet.


#60 WizardBlack

WizardBlack

    HybridZ Supporter

  • Donating Members
  • PipPipPipPipPipPip
  • 1442 posts
  • LocationMarysville, Ohio, USA

Posted 22 April 2009 - 05:47 PM

I noticed this and checked out Georges profile, not active since '07.

If anyone notices something on trademe.co.nz they want, i am willing to consider acting as a NZ agent for you guys.


I might take you up on that. I don't think the VH45 platform is gonna take me where I wanna go.

1977 280Z

- RB25DET swap and Q45 rear end swap in progress (Delayed!)

- Frame off resto in progress!





0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users