docaam

Check Carbonsignal its their kit, Moonbeam Range and one with 370z nismo Kamaruz

That's a long long time. I managed to install VQ35DE. Infact installing a VQ37 in Skyline Hakosuka also

Sorry must have missed it where you got these headers from I am looking if there is anything off the shelf for my RB25/30 project

Thanks I would never turn a Nissan into a chevy

Been a while posting back to show the update, took a while to finish the car back when opened it during its glory Made the VQ35 run, installed our Moonbeam Gnose version kit similar to what was installed on Chris Forsberg car last year SEMA and redid the interior, went a bit long way apart from normal interior pieces which carbonsignal made we made other rear ones and roof panel as well, from the molds all done in carbon fiber. Installed a custom roll bar, door panels, and dashboard done in FRP wrapped in leather and Alcantara and redid old Bride seats in similar material. Installed new CS design gauges will post pics later from closeup. Wheels were done new worked with SevenK do design something similar to Equip and SSR mix of both in 16x10' and16x11"

Hi good luck. Better keep wheels ready as bigger wheels would need some good amount of cutting. Just finished ones yesterday. Ideally keep full half day two people to install it all.

That many cuts aren't needed for stitching as I'm doing one top piece as in pic below https://goo.gl/images/bdNGhy

There are plans to sell individual parts but next year till then only full kits first to have some Zs had these installed l second it would need redesigning as there are grooves for fenders which without fenders might not look good

It's been a while removed VQ30DET and installed VQ35 changed the colour and wheels. Will post pics once CS Moonbeam kit currently in painting

It's Moonbeam Spec JG kit made by Carbonsignal Automotive, company based in dubai www.carbonsignalauto.com We made two Moonbeam designs one with gnose and one without this is nongnose one. Kit is offered in FRP and CF. I will send you a message to see if we can join as vendors for this forum as have lots of S30 parts to offer. We are the same company didn fuguz interior last year and this year Gnose Moonbeam along with whole new 280z interior will debut in SEMA

Glad ito reached safely looking forward for updates

Not sure what's the way to be a vendor here? We are launching our new moonbeam kit as well this month https://instagram.com/p/BB7wcYmBUDN/

Try looking at work wheels as well. Volks and Work we only available under 2k price mark rest when I searched were expensive.

See one pic is of sizes offered last year and they have another special run of SL series for 2016

There is some confusion the wheels on fuguz I did order one of the last set as it was limited run from beginning the SL range. VOLK RACING TE37VSL 15 x 9 -15 / 4 x 114.3 15 x 10 -25 / 4 x 114.3

No fuguz were not custom TE37 as there are no custom ones. Greddy did confirm when I was doing their interior the offsets as per rays website but I feel there might be some spacers

Subscribing for the HR swap

Looking forward to the outcome

Hi I was looking at your thread again and want to know a bit more about the ignition module are you just using the setup you posted and without any stock ECU?, I believe fuel is just coming direct to the carb right

pm sent would like to get something done similar

will work out a thread in few days

Need to check what's the process to post as vendors can take it from there. Will have a nice big range of z items with quality and fitment as biggest priority

Thanks came out great We in Dubai UAE (www.carbonsignalauto.com) pics and details mainly on FB page Carbonsignal1 We have soft released it quoting prices case by case It is actually but without autoclave just normal vacuum Ok guys been on this forum for past few years so some might know me, did similar interior for my Z as well minus some parts via my company Carbonsignal at that time were not that much into S30 and other cars but did few Zs and skylines, Greddy and Sung Kang liked the idea of what we do so they sent us whole interior to redo it in the beginning. When we got the parts they were shot and kind of beyond repair. We then made mold of each and every part and replicate in FRP/CF wrapped in Nappa leather and Alcantara. We did the whole new dash using stock metal frame, door panels are two pieces needed more work but wanted to keep close to OEM finish, upper part is in Carbon lower was wrapped, door handles, center Vent pieces removed the fan controllers and customized three holes for gauges, redid the center console as well again deleted some parts but kept the ashtray. Major part was to do the seats as most of all replica seats available are very small these are wider and can accommodate normal/taller people as well. I need to check with admins if they will allow us as vendors we can start offering these and currently doing whole interior for a 280z as well along with lots of exterior parts which we have. Some pictures more will post in a dedicated thread.

There is GPS module you can buy for autometer as well. I have it ran fine

I ran atara Racing 10.5 -32 in the front they do poke out with normal ZG flares but inner side clears