-
Posts
2941 -
Joined
-
Last visited
-
Days Won
23
Content Type
Profiles
Forums
Blogs
Events
Gallery
Downloads
Store
Posts posted by RTz
-
-
Looks to be the same car in post 48...
-
Why part it?
Bent nose... for starters.
-
-
and will pull it out and see if it runs differently with it disconnected entirely.
Exactly. If it behaves the same with it unplugged, you're likely on the right track
-
Dave,
Check the water temp sensor and it's connections (lower thermostat housing). Other things can cause similar symptoms, but poor WT sensor connections are very common with the age of these cars, and cause behavior very much like you describe.
-
My mother... and a Magic 8 ball.
-
As for the other you'll just have to experiment.
-
Ok Fella's, here is a link to the recipe I used....If chopping habaneros by hand, rubber gloves are recommended since the habanero peppers will burn the skin.
...and wear a fire suit while serving
-
It's okay, RP. You're not missing much. A serious stretch of the imagination by some drunk dope.
-
pepper jam? as in the little dried black balls?
Definitely not. John will probably chime in, but I'm thinking habaneros or some other 'kick you in the groin' pepper.
-
My favorite is on crackers with cream cheese.
Mongo mentioned the same thing. Sounds good. I'm guessing that'd tame the beast a little
-
I don't know how you downed that entire muffin. I smelled it and my eye's began watering (I'm not exagerrating). I took a small taste and the flavor was unbelievably yummy, but it cost me more than 10 minutes use of my taste buds and a few tears
Good stuff John!
-
Why be sensible?
-
-
That's a whole bunch of sexy.
The F16 is *THE* sexiest man-made air processor ever conceived, period.
-
What??? Not a single picture of me in my raisin smuggling speedo? Hurt. Very hurt.
-
I reckon he can get lower and use more of his side wall. HA, yeah right!
Crazy as it seems, the answer is he (or someone) will!... pulling more G's in a bike is directly related to 'getting lower'
-
Valentino Rossi
:hail:
-
Give it a rest Sparks.
Congrats Dave!
-
Driving by the field last night, I saw two Staters investigating. I Stopped to talk with them. They asked a few questions and told me it was looking like a record buck, or close to it, and there was public 'chatter' about it. A little googling...
Some of the forum talk is interesting... http://www.ifish.net/board/showthread.php?t=275841
News story... http://www.oregonlive.com/clackamascounty/index.ssf/2009/11/sandy_man_cited_for_illegally.html
-
I know id need a threaded sleeve for them to thread into but were can I find one of these?
Try Beta Motorsports, Ground Control, Speedway, Lefthander Chassis, etc.
I was thinking I could just chop the miata ones when then I realized the sleeves are aluminum. and those wouldnt weld verry well to the oe shock inserts sleeves which I believe are steel.I'm not familiar with the Miata stuff you speak of, but most vendors provide aluminum threads/nuts. They aren't normally welded in.
Does anyone know were I could find the correct sized sleeves that i could weld on so I can install these?Keep in mind the strut tube diameter is different between early and late 260Z. Make sure you get the threaded tubes that fit your strut tubes (measuring them would be the safest bet).
-
I occasionally weld plastic. What I use is similar to that linked in the first post, but with a rollerized rod feeder/guide (manual) slipped on the end. I've only used it on PVC, CPVC, and Polypro.
Depending on weld orientation and quality, it can be reasonably strong.
Built a laptop stand on an existing poly cart a couple weeks ago for a customer...
-
please if u have post pictures please.
It's spelled "you".
Also, using your shift key would be appreciated, thanks.
-
Can't seem to access anything from my account.
A better description of the problem might help
Luxury garages
in Non Tech Board
Posted
Where's Robin Hood when you need him?