philipl

pm has been sent thanks phil

Ive got your glass ill pm you with pricing thanks phil

no problem man

hey corey ive still got mine if your interested $65 to your door it will need turning/grinding though thanks phil catch ya later!

no, thats really going to require alot of work.alot of patching in new sections etc.unless your a good fabricator and love to weld you probably can find something half as rusted for near the same price.....

THANKS MUDBOY just got you payment i will send these out hopefully tonight or tomorrow via fedex ill pm you with a tracking number.......

$50 good block out of a 73 lex ky sorry i cant ship:burnout:

ive got a real good black hood and front fenders im in lex ky though if interested ill let go for $170 for all sorry i cant ship........

Here are a few pics of my project its been going on for several years i know its slow but with family and kids things take time.Anyway here they are.Car needed new frame rails so ive installed bad dog front to rear with square tubing in the engine bay.Engine is stock turbo build megasquirt pallnet rail supra 440cc inj yada yada yada.....paint is just a cheap omni single stage i was going for maroon but it came out somewhat red i guess you cant win them all .......

heres the pics unfortunatly i cant guarentee either are working flaps on each end do move smothly like they should, but the price is right sorry i can only ship US only..

Ive got two from non turbo zx motors.they look like 30 year old parts though nothing brand new or anything but they have been out of the weather thier whole life on a shelf in my garage ive pm with price.....

Ive got your parts from a 77 or 78 i can ship fedex tonight or tommorrow ive pm,d with pricing.......thanks

I have these first the good glass is nice trim nice second the bad some bubbling on the black surface at one end and trim needs upholsterd or painted.

ive got a set $50 $25 shipping $75 totall........

Ive got your flange i can ship tommorow.check pm with pricing. thanks phil

I have your 2+2 driveshaft out of an 1983zx with 5 speed and r200 rear end .I can let it go for $75 shipped to your doorstep via fedex paypal only .thanks phil

nice work man i used the same square tubbing for engine bay and used bad dog stuff the rest of the way back.....

Thanks guys for the responses to this one, the crank was turned just slightly to allow the chain to seat into proper location on the sprocket i guess my visual top dead center may have been a tad off .it appears that Timing Relationship between Crank and Cam is dictated and somewhat limited by distance between the two special chain links on a stock motor. hey thrust nut just noticed you are an aircraft mechanic just thought i would tell you my brother in law has a p51 mustang with the rolls merlyn engine in it its pretty awesome it actually did several tours of duty and shot down maybe 13 german lutwaffe in wwII.....

Im rebuilding a stock l28et for my 240z and putting the chain on head has been shaved maybe .005 for straightness and stock head gasket used old sprockets are being used with new chain .#1 piston was set at top dead center visually and cam mark set dead on while putting chain on it was just near impossible to get it on without slightly turning crank to get it on i hope i havent messed up i now realized i should have turned the cam slightly i do have 42 chain pins between sprocket teeth as recomended by other post. AM I OK TO MOVE TO NEXT STEP THANKS PHIL....

pm sent:lol:

Ive got your control arms from a 77 280z.I pm you with pricing thanks phil....

I pm you with pricing thanks phil !!

thanks for the info guys 1 fast z looks like you deal with these motors on a daily basis i really enjoy gettin the gospel from people who have tried and tested thanks again !!!!!!!:icon14:

Ive got a question for anyone thats been here before .Here is what i have TURBO L6 im replacing rings ,bearings ,gaskets.My cylinder walls all mic evenly between each other and still retain factory crosshatching i went ahead and honed the cylinders properly to deglaze them.i ordered standard rings for an turbo L motor my new rings ring gap on top ring three inches down in cylinder is .018 give or take a half a thousands this is outside of the ring manufactures specs of .004 per 1 inch of diameter and also outside of the how to rebuild your nissan L series specs of .012 to .017. My old factory chrome plated top ring in its designated cylinder "3 down measures .013.I have seen on another post two different people getting the .018 thousands ring gap with new rings .my rings are imc.One thing i noticed the part number for aftermarket rings is the same whether or not it is turbo or non turbo.Im thinking the larger ring gap maybe is ok due to higher temps being turbo.If you have been here before PLEASE GIVE ME YOUR THOUGHTS thanks phil........:burnout:

IVE got the zx fender but im in ky and dont have time to ship if you get down this way $50 will take it its black........