jeffer949

Rustoleum professional from lowes. search. my car in my sig was done with a roller

lol I couldnt get the plug out of mine so i cut it off and put a bolt in it and welded it up lol

He351cw?? I just got my set up done. Look for some posts by me for some pictures of my set up if ya want. Its a very cean install i think.

Hey now!! you know my car is down more often then it is working!!! lol Well thats been the case lately at least. It was down for 2 weeks then i had it running for like 1 and half. then it was back down for 4 weeks. ran for 2 days and now its back running again. lol WHAT A PAIN!!!

thanks for the write up derek. i hope to go down that road soon.

this isnt the thread for this discussion. pm me if you want some info

I know how you feel my life and including my car its just been one thing after another and its getting really old.

LOL ya you are.

yes a t3 turbine with a t4 compressor

pm sent

I just recieved this e-mail from joe at SSAC when i told him i had a manifold to send to him. Jeff Without a sample of the " ACTUAL " manifold - we cannot make something based on a picture - as we dont know the proper lengths of the pipes, or how far the turbo flange is from point a to point b , and so on ......... We use Jigs and templets - Does anyone have a cracked " AFTERMARKET " manifold So its looking like we need an aftermarket manifold to send to him. kinda making this a little more difficult. I would think that we should shoot for a greddy or one like the type i showed earlier.. Input would be great guys. Jeff

I get mine tomorrow and i think im going to buy some RIMS or i could be smart and pay off some bills lol.

hrmmm how about my my work van???? lol

LOL ive had a few. one was out of a 300zx. one was out of a 92 i believe and now this one is out of an 89maybe. idk i didnt pay that much attention to it. here is my crossmember. It was my first welding project and it is really ugly but its worked so far. And when i say my first welding project i mean i went and bought a welder and hadnt welded before and tried to make this. lol

the b box speedo cog carrier can be used with the c box. Take the carrier and cut a slot 180deg. from the original holding slot. and then put it in just using the new slot you just made. it works fine

Congrats man. I know the feeling of finally getting your set up where you want it. I always dreamed about a megasquirted and holseted turbo motor and i finally have it

Ok something we need to get nailed down is what size we want the primaries. I heard someone say "1 5/8" would that be good or idk Give me some ideas. im getting a manifold shipped off to him for mock up.

color

Just took it out tonight and all i have to say is HOLY COW 15psi is fun to say the least... I REALLY NEED WIDER RIMS/TIRES!!!!!!

congrats scottie!! hopefully ill be seeing more of you at the track.. well that would mean i would have to go more.. lol

thats actually the second time he has worn that i believe. Nobody knows where to get it either

NA rx7 FC

i just built my 4" down pipe for my holset. search for it under my name there is pictures

Honestly i dont think a completely equal length turbo manifold will happen. it would more than likely not allow for A/C use which i think would kill this for a group buy. The people that are looking for the max effort turbo header will more then likely have already had ones custom made to there purpose. What i think we will get out of this group buy is a very nice well flowing manifold that will out flow the stock by a lot. I think if we stick with the manifold design that i posted earlier it will satisfy "most" of our crowd. I still need some input on what size to have the runners made. Also do you think a 44mm v-band waste gate would work well for us? I know that alot of people are saying to go with a 38mm flange but ive been hearing that some people are getting some pretty large boost creep with the 38 so i say we should plan ahead and go with the 44mm. That would also take away an issue of them welding the flange on in the wrong position like was posted in another thread.