cyrus

Where can I buy 3.5" exhaust tubing and elbows 90 45 etc..? And a tube expander?

I have changed everything and still have detonation...who can I go to fix this? I need a supra specialist that has the toyota software... I am in san jose

I drilled a .125" hole in the exhaust and put a brass line leading to a gauge. UPdate I cut the muffler off and am now seeing a 1.5 max PSI. 3.5" dial pipe here I come. PS who sells the pipe and elbows in huge sizes?

I personally would not do it. Since you can not get high perforance as in way beyond BFGs. I think pick-a-part instead of old school when I see them. But to each his own.

I have 5 PSI of back pressure post turbo, is that bad? Yeah yeah I know it is, but how much power should I gain by bring that down to .05 PSI? Presently my 2JZ-GTE is making ~315 at the wheels.

I should of put it in the non tech board...I must be a Newbie...

What is biggest wheels that will fit on Z? Hey anyone here used 5 lugs? Is it possible to use a R230? Show of hands who is running on dubs? (20" inch rims) I want to put a Vtec in my Z? Can I put 275's on my 7 inch rims? Can I put 175's on my 10 inch rims? Where can I find the biggest wing for a Z? I am deciding between a civic and building a hybrid Z, my budget is ~$1500 dollars what should I do? Where can I find a non rusty Z, I am in Minnesota?

Now we can use a SFI 9.1 blanket instead of a scatter shield. Where can I find one?

even if the car is idling the car will stumble...

2JZ-GTE + Ford tauras fan = trouble HELP! My car is has a 90 amp alternator with the tarus fan. When this fan turns on the car stumbles and misses the amp draw on start up isabot 40 amps!!!! So is the fan drawing to much? Burnt? I tested the alternator at kragen and they said it was good? IS it? ps the voltage reguator is integrated on it. Is the battery just to small odyess 680mjt? When I drive on the freeway the lights flicker... I need help please.

Well, I am just trying to put my cobra wheels on and drive. I know The coilovers need to be on but I did not want to do the brake work yet...

Greetings, I want to temperarly run the stock discs 240z with my 1986 5 lug 300ZX hubs until I get my real (big) brakes. I want to check fitment etc...Do I just redrill the rotors and make a spacer to push the caliper out? or is there more to this?

756- ~10 lbs for wood and that give 746 lbs. I am struggling to make the front of the car lighter. The massive radiator and intercooler are not helping. But the 22 gallon fuel cell is helping in the back. The cars weight is 2505 lbs with 7 gallons of fuel.

I think I am just frustrated that no changes are allowed with smog. I failed the smog test because a downpipe was installed...

The car is cool but the engine is kind of lame. It is powerful but jerks, bucks, is intolerant of detonation, and they wear out in 65K miles. I wish mazda would drop that engine for a nice 6. I know so many people love the engines but the durability is just not there.

I have pics that I sent to Matcookson, but no reply can anyone else host?

A T56 would work fine with a 3.36 or 3.55, as long as a reasonable turbo was used. If a massive turbo would lose some boost in shifts. And I agree If it does not have a manual I would not be able to enjoy autocrosses and such.

I pulled the 2JZ-GTE. Then went to walmart for some $5.97 bathroom scales. I weighed it rather creatively. Who can host pics?

well 2126 caught me. It is because I want to order custom stub axle so no spacer is needed (NHRA)....,But I do not want to spend the brake/coilover money yet ($$$$/$$$). If I had all the parts this would be easy.

Clifton how much more do your disk brakes push out the rear wheels than the old drums?

I have found this post but I am unable to find anyone who has done it with no flares. Can anyone tell me the Coilovers they used and the spacer thickness required on a 24m rim? I am estimating 0.400" let me know http://forums.hybridz.org/showthread.php?t=70350&page=6&pp=10&highlight=cobra+wheels

I need a hanging scale for my engine hoist so I can tell you how much the 2jz weighs. Who sells one?

why do you need Lower control arms and camber plates???

mine...all mine...

I have sold most of my remaining supra TT parts recently and had more trouble than i have ever encountered. The Supra owners that called (me Pick at least two): 1 could not speak english 2 could speak english but were unable to form a sentence 3 though they were better than the rest of people in the world 4 had no manners 5 were rude 6 were in school. I was low balled, insulted, made fun of, etc...but when I sold my mustang rims I met a total polite gentlemen...go figure.