Dat260Z

I have em. Need to be blasted and rebuilt. They are rusty. $20 +shipping

i have a short block here in GA you can have for $100. came from a running carb'd z.. pulled it out for turbo swap

Box of SDS stuff is on the way ! look forward to seeing the finished product!

subscribed here and on FB!

Those were before rebuilding/powdercoating . I now have front and rear z32's ready to be mounted. Here is a breakdown of what I have invested : Front bracket $175 Front rotors:$125 Rear brackets:$150 Rear rotors:$110 Front z32 aluminum 30mm calipers $250 Rear aluminum z32 calipers :junkyard find for $35 for the pair Z1 motorsports caliper rebuild kit: all 4 corners :$50 (do not buy) Stainless braided lines with banjo fittings $125 Brake pads $100 Powdercoat $45 A good amount of time braking down , sandblasting, powdercoating , rebuilding calipers )And I got some sweet decals made to stick on the raised NISSAN lettering..probably wont stay on very long but they are pretty. I will throw so,e high temp paint on the letters if the decals come off.

i have one that is shortened 1" .. off of a 83' Turbo car

I have a Bosch IAC on my TB spacer. Contact Pallnet , he can make you a spacer with provision for sensor. Ill be running SDS EMS

Here are my 16x8 +4 with 205/50/16. Running a 7mm spacer in rear to clear brakes

I have a mini MOMO wheel 10" diameter ...definitely need the small wheel with my stationary sparcos!

^ this! I'd go with any T3 product over eBay cheapo stuff anyday!

What Koni inserts are you running ? 86411220 sport? Have any issues with fitment in the 280 strut tube.

I have a set of wheels and a low miles p90a head. PM if interested

I have a MS relay board for sale. Pm for more info

This kit is no longer being sold. TTT is prob the best bet for the $

I might be interested in a pair if fritt doesn't want both sets.