JPN_Garage

Send us to us In Orlando JPN Garage

You might have a bad injector or Carb jet

We have been speaking with BC Racing to create a coilover system for the 280ZX We already have a 1980 ZX to use as template but we wanted to know what are things that customers would be interested in like extreme kit, camber plates and other. We also wanted to know if there's any difference between years or models on the 280ZX. Please let us know if there's any interest so we can make this happen.

I dont charge for shipping at all on these unless your in Canada, Please tell me the name of the shop so I can call them myself.

i ran the harness through the same spot the original ones comes out of.

I did and they look great, there a little taller than the ZG ones.

Love the ITB setup, I was contemplating on going this route. Any noticeable gains with the ITB's

Yes I did, the wiring close to the throttle body was not pinged correctly so it was throwing the whole engine off, I rewired a portion of the harness and everything worked great after.

I will actually be meeting with Kato from Liberty Walk July 5th so we might be working together soon.

Im a vendor for all CX Racing products and I just spoke to them today and they informed me that the actual version they sell now dose not lower the vehicle much at all, there making a revised version to go low but as of now this kit dose not go low.

Im looking for an S30 rear IMSA 3 piece spoiler ASAP. If you have one for sale please pm me with info. Thanks.

I am one of the vendors for FRP products, we will have the price list pretty soon and yes we do have a big container on its way.

Thanks for posting guys. Just wanted to let you guys know that we now offer an extreme low kit and longer camber plate studs as a free option.

New installed pictures added.

The CX racing is actually a replica of our BC coilovers but in a smaller strut tube diameter and no options to revalve or change your spring ratio.

Designer required a price increase with all the work he had to put into these flares.

Yes we have a separate link on the website for the rears. This is a new rear spoiler design that we will be releasing soon.

Molds and first couple of kits are done so new pictures are up on 1st post. http://www.jpngarage.com/D-Brinkworth-S30-S31-Datsun-flares-full-set-D-Brinkworth-Flares.htm

They will be back up in 1 to 2 weeks with new pictures.

240Z and Early 260Z = 50mm strut tube Late 260Z and 280Z = 55mm strut tube and the rear's are longer by 2.5 inches.

On a 16x8 you can go with a 205/45 or 50 16 tire

Should have got the Soarer or a Cedric. Nice purchase tho.

The 240Z we have pictured with the wheels is a photoshop cause they only make them in +18 and +30 till know that there gonna do them for us in 0 offset. I can post an image but its not a Z.

I know the Z community has been asking for 16 inch wheels for some time so we have been working with Klutch wheels to bring various of there wheel designs in sizes that they don't make but we can fit in our S30 and S130 Z's with and without fender flares. Prices and more info on the link. http://www.jpngarage.com/Klutch-wheels_c8.htm These will be the wheel specs. Aluminum cast with CNC marking. Klutch SL1 Mesh wheels 16x8 3 inch lips 17lbs a wheel 0 offset. 16x9 4 inch lips 18lbs a wheel 0 offset. 72mm bore 4x114 and 5x114 Colors: 1) Silver face machined lips. 2) Black face machined lips. 3) Bronze face black lips. Klutch KM16 16x8 17lbs a wheel 0 offset. 16x9 18lbs a wheel 0 offset. 72mm bore 4x114 and 5x114 Colors: 1) Silver and machined. 2) Charcoal and machined. Please let us know what is the interest on these.

Why would you do this if there's various S30 kits out there already at great prices.