Jump to content
HybridZ

Jared

Members
 View Profile  See their activity

  • Posts

    182

  • Joined

  • Last visited

 Content Type 

Everything posted by Jared

  1. Jared
    Best way to track down something like that is to take the ECM apart and see which circuit is burnt, trace it to the pin in the ECM connector, then find out what that pin goes to. From there it's just normal short finding.
  2. Jared
    If you are losing that much coolant in a day it's definitely something that needs to be addressed. You should also be adding 50/50 water coolant, not just water, the water will evaporate out, plus not provide proper protection to the system. You need to look everywhere, everything on the car is 30yrs old, could be the heater core, radiator, any of the hoses in the engine bay, water pump, etc...
  3. Jared
    Z31: S130: Z33:
  4. Jared
    I don't know what you're looking at but my 83 has the spring on the strut. The Z31 and Z33 have them separate.
  5. Jared
    I think sticking with the R200 would be a good choice on the rear diff. Good luck with the rest.
  6. Jared
    Yup, just buy the tubing and bend it yourself. 3/16" tubing with 10x1 metric ends. Shrink wrap is a good idea too.
  7. Jared
    Don't make that mistake, I did.
  8. Jared
    Looking for OD", length of the body excluding studs" and length including studs." thanks, Jared
  9. Jared
    What is the power goal? That has a lot to do with volume.
  10. Jared
    What's the volume of the plenum?
  11. Jared
    Yeah, I'm behind schedule too.
  12. Jared
    Awesome idea!
  13. Jared
    Very nice, looks like the S130 needs some wheels so the other two don't out sport it too much. I'm picking up a Z34 after the first of the year to sit out with my S130 and Titan.
  14. Jared
    http://forums.hybridz.org/forumdisplay.php?f=145
  15. Jared
    I emailed a few pics that I found to your admin email address off the website.
  16. Jared
    I can get some tomorrow, the car is at work right now.
  17. Jared
    My 83 is KHLS130JFUBC1W and has digital dash and leather, as well as the top model 280zx printed door panels and seats.
  18. Jared
    Found this one, a quick interesting read: http://www.e30m3project.com/e30m3performance/tech_articles/susp-tech/rear_curves/index.htm
  19. Jared
    Any good links on the Bmw stuff?
  20. Jared
    Has anyone had any problems with them or are they sufficient? If so, is there a bolt in upgrade? Mine is shot and I'll be going with a bigger clutch soon so I don't want to get another stocker if it won't last.
  21. Jared
    z31 brakes are not a bolt on, but the outer hub, bearing and inner flange go in with the z31 axles.
  22. Jared
    The rear is a straightforward swap to the 5 lug Z31 stuff, the front is a little more complicated.
  23. Jared
    I've been told this part is nla from Nissan. Is there any source for aftermarket or good condition used that anyone knows of? thanks, Jared
  24. Jared
    Arizona Z Car has a really nice Wilwood setup.
  25. Jared
    Old post, so the above link is no longer working. Is there any further information on making the digital dash read higher?
×
×
  • Create New...