78zlt1

Awesome, Thanks alot !

You don't happen to have the part # for the condenser? It looks like the ports are on the same side, Thats what Im looking for. Thanks!

Thanks to HybridZ members here I've been able to source the pieces I needed, all trim is repaired and polished, Thanks All!

Still in search of windshield corner trim pieces. Thanks Steve

Looking for the 3 small stainless trim pieces for the s30 windshield, 2 corners and small center cover piece.

Mine is also still a work in progress, and Orange.

Nope the ZX rack is behind the cross member, it would steer backwards.

Whoops Screwed up the links, fixed them should work now. Yea I stripped it to bare metal sanded the exterior body panels manually everything else I blasted with coal slag, then epoxy primed and did all the body work myself ( replaced the rear and drivers aft quarter, and replaced the front end rebuilding the frame rails and adding sub-frame connectors.) I haven't painted a car before and didn't want to mess it up at this point so I let a pro Spray it. I'm using a 2001 camaro fuel tank because I am installing a 95 LT1/T56 ,I like the idea its a stock pump in the tank. fits ok , but had to remove the spare tire well. The link below , has alot of pictures from the start to now.

I haven't posted my build, but I hit a mile stone and just got it back from paint so I thought it would be a good time to post. I purchased the car in 2002 and have been working on it on and off since then. I'll post pics as I rebuild , and some of what I have done up to this point. & wanted to thank everyone at Hybrid Z for the invaluable info that helped me to get this far.

Wow , Great job.

I have had good luck with Marsons Platinum. Its smooth and sands easily.

Looks sorta familiar........ http://carscoop.blogspot.com/2009/06/amoritz-gt-brazilian-concept-study-for.html

Looks great

Got a reply from Motorsport auto : The type2 airdamn is made with epoxy resin Thought I'd post the answer in case someone else needed to know.

Does anyone Know what the MSA Type 2 airdam is made of is it polyester fiberglass or epoxy fiberglass?

Heres mine.... or lack there of.........

I would grab everything out of the 350z , see what servos/sensors exist and make a plan of attack from there, the 350z factory service manual will most likely show the pinout for the hvac controller , if your lucky it will show what each pin is for. you'll have to backwards enginner it. anouther route would be to use r/c plane servos, and a micro controller to interface to the hvac system, but that makes my head hurt thinking about that.

Most circuits in a car are dead till the key is switched to the on position. hot with Ignition on circuits Sorry this is sorta off topic, I see you are using NX5 , I use NX4 at work , is NX5 much of an upgrade from 4? I saw the pitch on NX6 today , it looks amazing.

1962 Messerschmitt Kabine Roller 200

Has anyone had any success with this? I'll be doing this soon and am looking for ideas.