gb20

I do PPF installation as part of my business, whatever that's worth. At the very least, I would do the full front end (hood, fenders, headlight buckets, air damn, and lights) along with the lower rocker area going down the sides, then some on the rear quarter, in front and behind the wheel. Any body panel that is slightly sloped downwards, like the doors and rear valance, has a high risk of getting damaged, so think about covering those as well. You can then do a ceramic coating over the rest of the car which will help prevent the dirt build up along the edges and protect the rest of the car from UV and chemical damage. Doing it yourself can be done, but if it's your first time, it can be surprisingly difficult to get it right, so plan on wasting some film and getting frustrated. Also, be careful of inexpensive film. It's usually very poor quality which will yellow and crack on you very quickly and is a pain in the butt to remove. Oh, and check with the painter to see how long you should wait before applying the film. If you do it too early, it can cause all kinds of problems leading to needing a repaint. I don't get on here nearly as often as I'd like, but you can feel free to reach out on FB at fb.me/devilsdetailsgb or instagram.com/detailsdevils with any questions. I'm happy to help however I can.

Thanks guys. I'll do those things and see if I get anywhere. Also getting a new fuel filter as well.

Hey fellas! So I'm working on getting my 260Z up and running for the first time in 10yrs. I have a couple issues I'm hoping you guys can help me out with. First: I got it to start for the first time yesterday and there is a substantial amount of white smoke coming from the exhaust. Any ideas on the cause of that or what to check? Second: I've adjusted the carb so it idles well...ish right now, but as soon as I give it any gas it sputters and dies. I just ordered a new fuel filter but any other causes I should look at? Third: On the chance I need to get the engine rebuilt, any ideas on what I should expect to pay for a quality job? Thanks so much for any help you're able give.

I am actually in desperate need of an L26 if you're selling it. I would love to go V-8 as well, but funds aren't there yet. How much would you want for the L26?

It's one I've had for about 6yrs. The engine has been gradually getting worse and has now been sitting for about a year. Thanks for the info. I'll give them a call and see what they say.

Hey guys, I need the engine in my 260Z rebuilt and would like to know of anywhere in Las Vegas that you know will do a good job and that I can trust. Any help would be greatly appreciated. Thanks guys, gb20

Motorsportauto.com has some that seem like they would cover pretty well

Thanks for your help. Do you know of an inexpensive place to purchase the TKO? Any good used sources?

Ok, so from what I found, a T5 from a mustang with it's bell housing will bolt right up to the 351W. Does this sound about right to you guys?

Hey guys, My wife just offered $3,500 from her bonus (how awesome is that!) to put a V8 in my 260Z. I want to put in a 351W and a 5 speed trans. What transmission would you guys suggest for this? Any years I should look for or avoid? And any suggestions on what year engine to go with? I want to go carbed for now, if that makes a difference at all. Thanks for any thoughts you have guys, gb20

Could someone just mount the fuel cell in the stock location under the car without going through the work of cutting out the spare tire well? I don't have a welder yet so this would make things much easier. Unless of course, there is a reason that won't work.

Letting them know right now. I really hope they can get it fixed so no one else has to deal with this.

So I have had the 6 into 2 headers and twice pipes exaust from MSA for a few months. I never thought it sounded right and it sure didn't run right. And from time to time, the Y pipe and the headers would blow apart. Tried adjusting it a few times and it never helped. So yesterday I took the whole thing apart and looked down the pipes. I looked in the Y pipe first and found this mess in there. They just welded the 2 pipes together then welded on the collector onto it like This. Once I cut this out and got the parts welded back together (thank you MREDDLE) it is totally different. My car sounds much better and wouldn't ya know it, it actually gets up and moves now too. So moral of the story: When buying parts like this, especially from MSA, check and make sure they are how they should be. They seem to do things the easy (lazy) way and ship out poor parts. I am just in awe at the fact they see this as alright to do. And thanks to MREDDLE for all the help getting my car to this point at all. Oh, and that slit is only 1" x 1/4" Not so good for flow at all.

I like it and will probably do a second Z in a white interior. With the right seats, the right material to cover the panels and the right accents, I think it could give kind of a supercar feel to it. Get an engine and figure out something for the body and it would be awesome.

I have this same issue on both my 260 and 280. And my dad has the same thing in his 260. I'm very curious as to what it is.

I'm really liking the look of that. Anyone got any more pics of this for us? Maybe some views from the rear? Thanks guys.

I would also love to see this. Living in Vegas, anything to fight the heat is appreciated.

For this, I thank you. Between you and Brian Laine, those of us wanting the Ford engine have a great starting point. Thank you!

Would you mind posting your measurements for us. I need a mount made ASAP and yours sweet. Also, I'm planning on a 351w instead of a 302. Anything in particular I will need to change? Thanks a ton.

I'm definitaly interested in how well it works. I plan on smoothing in my rear spoiler and flairs once they are on and want to use the right product for the job.

ADCTION Who's not addicted to spending money on their Z!?

Good point. It shouldn't be too hard to get the brackets to the frame. I'll do some searching and see if I can find what others have done. Thanks for info bro.

Ok, lets try this again.

I'll post pics of mine too in case I get to it before you do Although, I think it would be easy enough to just mount them to the air damn. Here is the front 3/4 veiw I have been working on. Thinking with it like this I could do the subtle Z kit with the fender flairs. What so you guys think? Ok, hang on a min. Having an issue with my pics. car sketch 2.bmp

Hey Nizm0ZED, do you have any pics of how those spot lights are installed in the grill? I like how that looks. Thanks