ZT-R Posted December 14, 2012 Share Posted December 14, 2012 We need dash and consoles in cf, man that looks so good Quote Link to comment Share on other sites More sharing options...
docaam Posted December 16, 2012 Author Share Posted December 16, 2012 We need dash and consoles in cf, man that looks so good I can ask the shop to make these consoles with guage space and maybe button etc, if someone is interested Quote Link to comment Share on other sites More sharing options...
gravityflyer Posted December 18, 2012 Share Posted December 18, 2012 Loving it! Quote Link to comment Share on other sites More sharing options...
ZT-R Posted December 18, 2012 Share Posted December 18, 2012 Id be interested in a 240 console, maybe not the dash insert as i have a vintage air kit and a radio. but defiantly the lower console. As long as its reasonable.. Quote Link to comment Share on other sites More sharing options...
ZT-R Posted December 18, 2012 Share Posted December 18, 2012 Which style arm rest is that too. I need to get one for mine. Quote Link to comment Share on other sites More sharing options...
docaam Posted December 25, 2012 Author Share Posted December 25, 2012 Which style arm rest is that too. I need to get one for mine. Id be interested in a 240 console, maybe not the dash insert as i have a vintage air kit and a radio. but defiantly the lower console. As long as its reasonable.. Sorry for the delay as couldnt pass by that shop, they now told me center console they can not do it as they made changes in mine and wrapped it, but the instrument cluster can be done provided there are atleast 5 orders with different configurations etc... Which style arm rest is that too. I need to get one for mine. I got an old armrest with the car just got it refinished in alcantara Quote Link to comment Share on other sites More sharing options...
raven12 Posted December 27, 2012 Share Posted December 27, 2012 Any info you can provide on the UK company used for the door sills? They look great! Quote Link to comment Share on other sites More sharing options...
docaam Posted December 27, 2012 Author Share Posted December 27, 2012 Any info you can provide on the UK company used for the door sills? They look great! Here you go buddy, http://www.ebay.co.uk/itm/240Z-DATSUN-20-OFF-FOR-XMAS-ETCHED-STAINLESS-DOOR-SILLS-PAIR-240Z-SILLS-/110990564183?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item19d78d9b57 Quote Link to comment Share on other sites More sharing options...
docaam Posted December 27, 2012 Author Share Posted December 27, 2012 As I said earlier when the shop was doing wiring i sent crank covers and intake manifold for polishing, so today everything came back and was installed along with coil pack and camgear covers in carbon fiber Got this long time back today installed it Compared to Chinese Nismo one Replaced Custom radiator cooling plate not liking it much but will fix it later maybe cut in half and some more bends, was done in aluminium then chrome plating. Got aluminium covers for headers and turbo plate and removed the stock ones Coolant overflow tank custom made according to the body curves in aluminium Chrome cam covers with coil pack cover in carbon fiber Cam gear cover changed to the carbon one, some changes were required as cover was for series 1 and Neo is slightly different. Intake manifold installed With fuel rail Quote Link to comment Share on other sites More sharing options...
ZT-R Posted January 2, 2013 Share Posted January 2, 2013 Looking Good, keep it up, it pays off. Quote Link to comment Share on other sites More sharing options...
docaam Posted January 14, 2013 Author Share Posted January 14, 2013 Looking Good, keep it up, it pays off. Coming something like that from you is a big comment Quote Link to comment Share on other sites More sharing options...
docaam Posted January 14, 2013 Author Share Posted January 14, 2013 (edited) Got the last set of missing parts some new emblems, strut covers, door handles and misc clips and stoppers for Nadri had to buy both Momo and workbell adaptor still the horn button is loose any suggestions? After the wiring got the car on dyno (AWD Mustang) but couldn't go above 230-240whp, coils start misfiring, but did the tune and car is running perfect now, pushing around 215-220whp on 5psi. Will change the stock coils, plugs and do a retune after a month or so. Did a quick cleaning job, all left now is to check the brakes as pressure is very low even after 1 inch willwood brake master cylinder Installed some generic pedals Will install Nardi after all the mechanical work, interior is all set now Edited January 14, 2013 by docaam Quote Link to comment Share on other sites More sharing options...
docaam Posted January 14, 2013 Author Share Posted January 14, 2013 (edited) Below was not going in the above post Installed the front Cusco strut bar cheery of the top for the bay , loving the engine bay some cleaning of nuts bolts is there but thats more of an ongoing project Installed spacers front and back fitment is superflush Edited January 14, 2013 by docaam Quote Link to comment Share on other sites More sharing options...
docaam Posted January 14, 2013 Author Share Posted January 14, 2013 Front needs a drop but will do once final alignment is done as caster, camber and toe is totally out as well infact all wheels has big curb marks Stanced out nice in the end Beauty and the beast Quote Link to comment Share on other sites More sharing options...
champfacp Posted January 14, 2013 Share Posted January 14, 2013 Really nice car!! Love it! Quote Link to comment Share on other sites More sharing options...
Nelatl Posted January 16, 2013 Share Posted January 16, 2013 What size spacers did you put on? Quote Link to comment Share on other sites More sharing options...
docaam Posted January 17, 2013 Author Share Posted January 17, 2013 (edited) What size spacers did you put on? Really big ones actually, 20m at the back and 35mm at the front Edited January 17, 2013 by docaam Quote Link to comment Share on other sites More sharing options...
Nelatl Posted January 17, 2013 Share Posted January 17, 2013 (edited) I just ordered those same wheels in a different color and offset about a month ago. Now after seeing your car I'm wondering if I should have gone with a more aggressive size/offset. I went with 15x9 -28 front,15x10 -28 rear... Hope I don't need spacers to fill my flares. You did a great job on the car by the way! Edited January 17, 2013 by Nelatl Quote Link to comment Share on other sites More sharing options...
docaam Posted January 20, 2013 Author Share Posted January 20, 2013 I just ordered those same wheels in a different color and offset about a month ago. Now after seeing your car I'm wondering if I should have gone with a more aggressive size/offset. I went with 15x9 -28 front,15x10 -28 rear... Hope I don't need spacers to fill my flares. You did a great job on the car by the way! You would be fine I guess, as per your offsets, mine are poking 10mm so you would be pretty flush Quote Link to comment Share on other sites More sharing options...
docaam Posted January 26, 2013 Author Share Posted January 26, 2013 Installed the Nardi steering wheel to finish it off the interior some little things pending thoughSome pictures i took, car was a bit dirty though.After driving some issues are coming up, like1. Brakes not taking enough pressure2. Some heat coming from from the gearbox opening3. Clutch pedal needs a bit of alignment4. Exhaust is too low might need working on gearbox mounting and move the exhaust up5. Steering rod had some problem during alignment time running -1.7 camber on one end and -1.1 on other will be fixed soonCoils, some trunk emblem, speedo GPS module and fuel sender are on order will be replaced next week. Apart from this car drives very nice suspension if a bit stiff i guess will loosen up after some driving. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.