Jump to content
HybridZ

1/4 Mile


ULISES

Recommended Posts

Hey, Guys

I would like to know what your 1/4 mile times are on a stock or light mod.

Going to the track in Sacramento saturday november 1st.

I have a 2.5 catback pipe and a 3" magnaflow exhaust, centerforce clutch, a k&n filter this is all in a remanufactured engine.

 

My guess is am going to be running a 15.5 to 15.7!!!

 

I would also like to know if any of you guys are going on this date?

:2thumbs:

Link to comment
Share on other sites

HI,

My car is a 77 280Z.(my bad), also i'm going to be running on 17" wheels.

I have an 82 5spd tranny.

I just want to know whats my time in 1/4 mile, I know my car is not fast.

But its always good to know!!!

Check out my galery for pics.

 

:rockon:

Link to comment
Share on other sites

My 260Z with a 2.8 flat top engine, su's header and cam ran like mid 15's at about 88mph, but it was not running right when I did that, I figured it would have dropped into the 14's easliy once I got the Dizzy straightened out, and the SU's rebuilt.

 

But.... I made the bad mistake of marrying a SKANK a little over 7 years ago, and well lets just say that play toy went bye bye to pay for an attorney.

 

Moral of the story, don't marry a skank.

Link to comment
Share on other sites

Moral of the story, don't marry a skank.

 

oh man... it might be wrong for me to laugh at that, but that IS the funniest thing i ever seen, heard or whatever...

omg HHAHAHAHA.

 

i would like to know what ppl are running in there S30 Z's with L28ET's, with just say a small upgraded turbo, exhaust, fmic, and boost controller... pump gas too. and on what tires.

would like to know on reg street tires.

i wanna run atleast a high 12...

Link to comment
Share on other sites

Moral of the story' date=' don't marry a skank.[/quote']

 

oh man... it might be wrong for me to laugh at that, but that IS the funniest thing i ever seen, heard or whatever...

omg HHAHAHAHA.

 

i would like to know what ppl are running in there S30 Z's with L28ET's, with just say a small upgraded turbo, exhaust, fmic, and boost controller... pump gas too. and on what tires.

would like to know on reg street tires.

i wanna run atleast a high 12...

 

Drag radials. See signature.

Link to comment
Share on other sites

Moral of the story' date=' don't marry a skank.[/quote']

 

oh man... it might be wrong for me to laugh at that, but that IS the funniest thing i ever seen, heard or whatever...

omg HHAHAHAHA.

 

.

 

Go ahead and laugh, that is what I am going to do when she figures out the money I paid her to buy her out of the house, that my attorney classified as alimoney, well that is taxable income to her, tax deductible for me. get ready to pay you BIOTCH. Not to mention I took away a house and acreage that had been in her family for 3 generations.

 

Another moral: If you marry a SKANK, lawyer up good when it is time to divorce, you do get what you pay for.

Link to comment
Share on other sites

well i wont be getting married anytime soon..

no g/fs in awhile, plus i havent dated or met any girls that would even put up with me for the rest of her life, because my cars, habits, etc...

being single is more fun anyways...

 

mike

Link to comment
Share on other sites

Moral of the story' date=' don't marry a skank.[/quote']

 

oh man... it might be wrong for me to laugh at that' date=' but that IS the funniest thing i ever seen, heard or whatever...

omg HHAHAHAHA.

 

.[/quote']

 

Go ahead and laugh, that is what I am going to do when she figures out the money I paid her to buy her out of the house, that my attorney classified as alimoney, well that is taxable income to her, tax deductible for me. get ready to pay you BIOTCH. Not to mention I took away a house and acreage that had been in her family for 3 generations.

 

Another moral: If you marry a SKANK, lawyer up good when it is time to divorce, you do get what you pay for.

 

 

at least your not bitter! :D

Link to comment
Share on other sites

While were predicting times, what kinda time do you think a 72 240 with l24 bored .10 over with a polished head, cam, full exhaust with headers, su's, a 5 speed, and k&n's would run. Also, how much of a gain do you think I would get with triple webbers. Thanks

Link to comment
Share on other sites

Guest norm[T12SDSUD]
While were predicting times, what kinda time do you think a 72 240 with l24 bored .10 over with a polished head, cam, full exhaust with headers, su's, a 5 speed, and k&n's would run. Also, how much of a gain do you think I would get with triple webbers. Thanks

 

Well my old 2.4L with N42 head 272/282 .450 lift cam and 10.7:1 CR and open header ran 13.6 @ 99 mph.Race weight was 2390 lbs with me driving.

 

later

Link to comment
Share on other sites

I've got a solid mid-low 11 second car with 9 of the last 10 passes in the 11's on drag radials with 60ft times averaging in the 1.8-1.9 range with 2x 1.66's. In the process of doing my tranny swap(powerglide) as this is probably the source of my problem...no topend power. Anyway, I think I can have a solid mid-high 10s car on drag radials.

Link to comment
Share on other sites

I've got a solid mid-low 11 second car with 9 of the last 10 passes in the 11's on drag radials with 60ft times averaging in the 1.8-1.9 range with 2x 1.66's. In the process of doing my tranny swap(powerglide) as this is probably the source of my problem...no topend power. Anyway, I think I can have a solid mid-high 10s car on drag radials.

 

When you get that powerglide in, I believe you will run 10s, no problem.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...