blairjj Posted December 24, 2006 Share Posted December 24, 2006 Dave, Sent you a PM to get a place in line for the spindle puller. Thanks! Jay Link to comment Share on other sites More sharing options...
Dave Posted December 25, 2006 Author Share Posted December 25, 2006 Dave, Sent you a PM to get a place in line for the spindle puller. Thanks! Jay Hi Jay, MarkM is the next in line once the tool gets back (Its lost in the Xmas mail). However if your in need of one now I will send you a second one I have on Tuesday the 26th. For some reason I am not getting PM notifications or new forum posts to my Email. Contact me direct at V8-240Z@juno.com to speed things up. Link to comment Share on other sites More sharing options...
Dave Posted December 25, 2006 Author Share Posted December 25, 2006 Guys there is one on Ebay right now with 3 days left on the bid if you're interested. I saw it while searching z stuff http://cgi.ebay.com/ebaymotors/240Z-280Z-Datsun-Rear-Spindle-Pin-Strut-Pin-Puller_W0QQcmdZViewItemQQcategoryZ42609QQihZ002QQitemZ120065992960QQrdZ1QQsspagenameZWDVW I dont know the seller and have nothing to do with this listing just FYI if anyone wants to buy one..... That is my ad, I have actually sold quite a few of the pullers on eBay. But for some of the end users that only need the puller for 1 job 1 car the loaner program here and on Classiczcars is the best bang for the buck. The loaner program on Classiczcars is run by Gary (aka beandip). Link to comment Share on other sites More sharing options...
Ledphoot Posted December 25, 2006 Share Posted December 25, 2006 Great Dave , nice program. I just wanted to point it out.. Happy Holidays Link to comment Share on other sites More sharing options...
tannji Posted January 13, 2007 Share Posted January 13, 2007 That is my ad, I have actually sold quite a few of the pullers on eBay. But for some of the end users that only need the puller for 1 job 1 car the loaner program here and on Classiczcars is the best bang for the buck. The loaner program on Classiczcars is run by Gary (aka beandip). LOL, I was going to buy one, use it, and then donate it to the lender program. Noticed a HybridZ member was high bidder, and came here to post my intentions. So, never mind.... = ) Link to comment Share on other sites More sharing options...
Dave Posted January 20, 2007 Author Share Posted January 20, 2007 I have the spindle pin puller back and ready to send out. To borrow a puller it will cost $20. The $20 is not a deposit, the money covers Priority Mail postage to you and prepaid postage to send the tool back. All I ask is that when you request a tool that your ready to use it and it gets returned ASAP so others will have a chance to borrow it. To return the tool all you will need to do is place the prepaid label on the Priority Mail box and set it out for the postman. There is no need to make a trip to the post office. Link to comment Share on other sites More sharing options...
tah Posted January 20, 2007 Share Posted January 20, 2007 Dave, I believe I sent you a PM to be placed in line for this tool rental. If it's my turn, please tell me how to get the money to you. Thanks Link to comment Share on other sites More sharing options...
Dave Posted January 20, 2007 Author Share Posted January 20, 2007 Dave, I believe I sent you a PM to be placed in line for this tool rental. If it's my turn, please tell me how to get the money to you. Thanks Your next in line, and I do have a second puller that is ready also. Link to comment Share on other sites More sharing options...
supraspaz Posted April 4, 2007 Share Posted April 4, 2007 So is the puller program still in effect? I am ready to pull the pins on my car. One question though, when reassembling, do i need to put them back in? or can i just leave them out? Link to comment Share on other sites More sharing options...
Dave Posted April 4, 2007 Author Share Posted April 4, 2007 So is the puller program still in effect? I am ready to pull the pins on my car. One question though, when reassembling, do i need to put them back in? or can i just leave them out? The puller program is alive and well. At the moment the 2 pullers are out and should have been sent back if they were done with them. When I get home tonight I will look up who has them and fire out a couple Emails. Link to comment Share on other sites More sharing options...
blairjj Posted April 4, 2007 Share Posted April 4, 2007 I have one and it is ready for return. I'll send it back to you tomorrow Dave! I got one of two out... Thanks, Jay Link to comment Share on other sites More sharing options...
Dave Posted April 4, 2007 Author Share Posted April 4, 2007 I have one and it is ready for return. I'll send it back to you tomorrow Dave! I got one of two out... Thanks, Jay Hi Jay, Thanks for the update. I was not worried about the pullers, I figured they would show up when there were inquiries about the program. Link to comment Share on other sites More sharing options...
AAA280z Posted June 25, 2007 Share Posted June 25, 2007 Hey Dave Looking to borrow the Spindle Puller. Sent you a PM. I'm cool with the cost going up $5 if it helps with using the right tools for the job. Thanks AAA280z Link to comment Share on other sites More sharing options...
Dave Posted June 27, 2007 Author Share Posted June 27, 2007 Hey Dave Looking to borrow the Spindle Puller. Sent you a PM. I'm cool with the cost going up $5 if it helps with using the right tools for the job. Thanks AAA280z Hi Adan, The puller is on its way, I will be back to the civilized world on July 11th. If you should have a problem just come back here and someone will help you out. __________________ Link to comment Share on other sites More sharing options...
Dave Posted July 12, 2007 Author Share Posted July 12, 2007 AAA280z has finished with the loaner and its back if anyone is needing to borrow it. I had to raise the price to borrow it from $20 to $25 because of the postal rate increase a couple months ago and the bite PayPal is taking. Link to comment Share on other sites More sharing options...
WizardBlack Posted July 24, 2007 Share Posted July 24, 2007 AAA280z has finished with the loaner and its back if anyone is needing to borrow it. I had to raise the price to borrow it from $20 to $25 because of the postal rate increase a couple months ago and the bite PayPal is taking. Send me a PM with the info, please. I am about ready. The cars is jacked up; the front is torn apart and ready to pull the rear apart. Doing Tokico kit and Energy Suspension Master Kit. Thanks, Mark Link to comment Share on other sites More sharing options...
Dave Posted July 24, 2007 Author Share Posted July 24, 2007 Send me a PM with the info, please. I am about ready. The cars is jacked up; the front is torn apart and ready to pull the rear apart. Doing Tokico kit and Energy Suspension Master Kit. Thanks, Mark Hi Mark, PM sent, just Email me when your ready. Dave... Link to comment Share on other sites More sharing options...
Minotaur Posted August 7, 2007 Share Posted August 7, 2007 I would like to borrow the spindle removal tool. how do I get ya the monies? Link to comment Share on other sites More sharing options...
WizardBlack Posted August 8, 2007 Share Posted August 8, 2007 Hi Mark, PM sent, just Email me when your ready.Dave... Thanks for the info. I ended up getting to the suspension and went ahead and knocked them out without it. I believe mine had recently been replaced; otherwise I'd have never gotten them out. Why, oh why, don't ppl use antiseize?!? LOL Thanks, Mark Link to comment Share on other sites More sharing options...
madkaw Posted August 21, 2007 Share Posted August 21, 2007 I am ready to pull my spindles so if no one has spoken for it i would like to borrow the puller. Please e-mail with the particulars. I will only need this for a day so I will be able to get it back in the system right away. sfinnerty@indy.rr.com Link to comment Share on other sites More sharing options...
Recommended Posts