Sparks280zt Posted September 4, 2007 Share Posted September 4, 2007 Well guys, I have faced the reality that now is just not the time for me to have a hybrid Z. First let me say that I have never had a daily driver with a good, functional AC and my current daily doesnt even have a radio. I have worked the past three summers from literally the day school was out until a day before school started back and I feel I have nothing to show for it. I could go on for awhile about how every step of my Hybrid Z journey has been trouble but I wont, a quick run down: -first painter rips me off for $1000, no work done -2nd painter breaks one off in me and does shoddy bodywork that can not be fixed to the tune of $2000 -turbo motor blown -floor pans not installed right -blah blah I am planning on selling ALL my Z parts and pooling my funds to buy a nice Dodge diesel truck. Heres a quick list of what I have, shot me a PM if interested. P.S. - I am keeping my rust free shell for future plans when I get out of school. Heres the list: ALL PARTS ARE NEW OR LESS THAN 50 MILES SDS EM-4 6F with LCD backlit controller, knock sensor, - $1500 Garret t3/t4 60-1 .63 ar - $600 Rebuilt P90 non hydraulic head - $300 L28et exhaust manifold with tial 38mm external wastegate - $400 New front and rear suspension techniques sway bars and full poly urethane maser bushing kit - $350 New 4x4 vented calipers with new pads - $100 Brand new SportMax 002 16x8s - $300 ITM Cast .040 over pistons with moly ring set - $200 Pallnet 11mm O ring rail with gauge - $100 Pallnet 14mm O ring rail with gauge - $120 ACT Clutch and pressure plate - $300 f54 turbo block - $100 f54 turbo block with new rings, bearings, timing kit - $200 Lots of fenders - $50-$100 Doors - $50-$100 1987 300zxt (car in sig) - $2500 I have alot more stuff, will throw it up with pics when I get a chance. Quote Link to comment Share on other sites More sharing options...
nosebleedZ Posted September 4, 2007 Share Posted September 4, 2007 Is that the least you will take for the SDS? I would really consider it if the price was a little lower. Quote Link to comment Share on other sites More sharing options...
dr_hunt Posted September 4, 2007 Share Posted September 4, 2007 I'll trade you all 4 tires and wheels off my dodge for your z parts! I'll even throw in the spare, tailgate, one door and the floor mats. Might get you the down payment anyway. Good luck! Quote Link to comment Share on other sites More sharing options...
Sparks280zt Posted September 4, 2007 Author Share Posted September 4, 2007 Is that the least you will take for the SDS? I would really consider it if the price was a little lower. With the other options on my system it was $1899 shipped to my door. I forgot to mention this is the distributorless ignition system with coil packs. I might come down some, but not much. Quote Link to comment Share on other sites More sharing options...
jasonZ Posted September 4, 2007 Share Posted September 4, 2007 PM sent Quote Link to comment Share on other sites More sharing options...
Sparks280zt Posted September 4, 2007 Author Share Posted September 4, 2007 Jason, replied, tell me if the pics worked, thanks. Quote Link to comment Share on other sites More sharing options...
91_4x4runner Posted September 4, 2007 Share Posted September 4, 2007 How much for shipping of the calipers and pads to 78233? Quote Link to comment Share on other sites More sharing options...
Sparks280zt Posted September 4, 2007 Author Share Posted September 4, 2007 $125 shipped/ insured Quote Link to comment Share on other sites More sharing options...
LLave Posted September 4, 2007 Share Posted September 4, 2007 any pics of the intercooler set up? What size inlet and outlet? Quote Link to comment Share on other sites More sharing options...
Sparks280zt Posted September 4, 2007 Author Share Posted September 4, 2007 3 inch inlet and outlet. I beleive the pipe is 2 inch. Here is the old set up. It has been re done with new pipes and the pipes were powder coated wrinkle black. Pics will probably all be up toward the end of this week. http://rides.webshots.com/photo/1433027023065819928epXNlR Like I said this is old set up, my sig pic also shows the IC. Anyways the new pipes look alot better and it has the GReddy RS BOV. Quote Link to comment Share on other sites More sharing options...
Sparks280zt Posted September 4, 2007 Author Share Posted September 4, 2007 Intake, turbo, and some motor pics: Quote Link to comment Share on other sites More sharing options...
ihatejoefitz Posted September 4, 2007 Share Posted September 4, 2007 Nothing to show for it? I think your car looks awesome. At least raise the price on that intake manifold. Quote Link to comment Share on other sites More sharing options...
v8dats Posted September 4, 2007 Share Posted September 4, 2007 will take the intake!! will pay tonight! please send me the info paypal ok? juanvazquez501@yahoo.com Quote Link to comment Share on other sites More sharing options...
slownrusty Posted September 5, 2007 Share Posted September 5, 2007 I am interested: 1) The R200 CLSD - condition 2) The sway bar and urethane kit 3) The intake manifold as well (if its not already sold) Regards - Yasin (slownrusty@yahoo.com) Quote Link to comment Share on other sites More sharing options...
Sparks280zt Posted September 5, 2007 Author Share Posted September 5, 2007 Yasin, -The CLSD is still available, its from an 87 300zxt with an automatic so I would say its not as thrashed as a manual tranny would be, I assume its in good shape. -Sway bar and urethane kit is brand new and all in original boxes, never opened. I guess Juan wants the intake. Quote Link to comment Share on other sites More sharing options...
v8dats Posted September 5, 2007 Share Posted September 5, 2007 Yasin, I guess Juan wants the intake. yeah i'll take it! where do i send funds? Quote Link to comment Share on other sites More sharing options...
proxlamus© Posted September 5, 2007 Share Posted September 5, 2007 poor Austin doin all that work helping ya.. and its going bye bye. man oh man sorry to hear your selling everything. Quote Link to comment Share on other sites More sharing options...
Sparks280zt Posted September 5, 2007 Author Share Posted September 5, 2007 Guys, not throwing my paypal address out there until tommorow. A member on here is considering buying everything or atleast alot of it. Hoping to hear from him tommorow afternoon and know where to go from there. Quote Link to comment Share on other sites More sharing options...
Sparks280zt Posted September 5, 2007 Author Share Posted September 5, 2007 OK guys, added some stuff to the list and removied other stuff. Package deal feel through. So paypal info is: mjsparks@uncc.edu Thanks Quote Link to comment Share on other sites More sharing options...
slownrusty Posted September 5, 2007 Share Posted September 5, 2007 Looks like the CLSD is gone? I'm crying if it is... Still interested in the sway bars and poly kit. I would not mind a pair of doors as well...but shipping might be crazy, do you have a Freight company that can give a quote on a pair of doors to 80906 (Colorado Springs, CO). Thanks and regards - Yasin Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.