JustinOlson Posted November 11, 2009 Share Posted November 11, 2009 Also, the worlds fastest (7.50 @ 185) wrx drag car is powered by the EG33: http://www.tonyrigoliperformance.com.au/bestets.htm Quote Link to comment Share on other sites More sharing options...
Gollum Posted November 11, 2009 Share Posted November 11, 2009 Talk about a beautiful HP plot. I don't think it gets a whole lot better than that imo. Nearly full power by 6k and a redline of 8k, yeeoww! Quote Link to comment Share on other sites More sharing options...
JustinOlson Posted November 11, 2009 Share Posted November 11, 2009 Subaru to GM adapter plate Quote Link to comment Share on other sites More sharing options...
WizardBlack Posted November 12, 2009 Share Posted November 12, 2009 Scoobies sound wicked with high compression N/A heads on them, too. One of my top 5 favourite sounding engines. Quote Link to comment Share on other sites More sharing options...
JustinOlson Posted November 14, 2009 Share Posted November 14, 2009 Transmission is on its way for my EG33 G-Force Dog Box Quote Link to comment Share on other sites More sharing options...
AkumaNoZeta Posted November 22, 2009 Share Posted November 22, 2009 Any update yet? Quote Link to comment Share on other sites More sharing options...
aliphian Posted November 22, 2009 Share Posted November 22, 2009 I gotta see how this turns out. I am a Nissan guy but I always find myself thinking of cheating with a subie. lol Quote Link to comment Share on other sites More sharing options...
JustinOlson Posted November 25, 2009 Share Posted November 25, 2009 This is a big project the more I look at it and take measurements. The width really is a tough one to get around. It basically makes you redo the frame rails, brake master cylinder, steering linkage, and TC rods. I'm still very much interested in this! I just need to get all the pieces lined up to pull this off as I don't want to start and give up half way through. So far I have: Wilwood reverse mount pedal assembly: http://www.speedwaymotors.com/Wilwood-Reverse-Swing-Triple-Master-Cylinder-Pedal,1959.html I'm going to high mount the steering rack and flip the tie rods so they go down into the steerers the the struts. This should straighten out the steering linkage and allow it to go over the top of the motor. I'm going to move the TC rods forward like a 240sx. I haven't figured out how I want to do the frame rails. I can widen their spacing, but then I lose tire clearance and turning radius. One step at a time I guess. I need to yank the L28 out and start cutting /J Quote Link to comment Share on other sites More sharing options...
JustinOlson Posted December 1, 2009 Share Posted December 1, 2009 Quote Link to comment Share on other sites More sharing options...
Daeron Posted December 1, 2009 Share Posted December 1, 2009 "Shoehorn: Its whats for dinner!!" "There were these things he had to do..." "Fat guy in a little coat.... Faat Guuuy in a liit-tle Coo-oat......." "Sitting to my right, the Jones family, 1, 3, and 5! To my left, the Robertsons, 2, 4, and 6!! Welcome to the Feud!!" "Because it was there" That picture just deserves words, and pondering. Quote Link to comment Share on other sites More sharing options...
myplasticegg Posted February 16, 2010 Share Posted February 16, 2010 Find a way to put a porsche trans on it and throw it in the hatch... Last thing you want to do is have to pull the engine to change plugs/wires, etc... I've got a SF5 forester and I absolutely hate doing anything to it that involves the heads. Quote Link to comment Share on other sites More sharing options...
AkumaNoZeta Posted February 16, 2010 Share Posted February 16, 2010 Find a way to put a porsche trans on it and throw it in the hatch... Last thing you want to do is have to pull the engine to change plugs/wires, etc... I've got a SF5 forester and I absolutely hate doing anything to it that involves the heads. If you wanted to go that far, why even get a Porshe transaxle? Just plug up the output shaft of the Subaru's one and use the front diff to run the rear tires. Quote Link to comment Share on other sites More sharing options...
drwharton85 Posted March 18, 2010 Share Posted March 18, 2010 Just curious if this project is still going on? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.