reddzx Posted March 3, 2009 Share Posted March 3, 2009 I have a 5/87 300ZX turbo with the CLSD R200. I have a set of 6 new clutches I got from Savage42 to use but I would like to find a source for bearings and seals. Does anyone have a parts list for this rebuild? I was told to check here for maybe a non Nissan/dealership parts source. Quote Link to comment Share on other sites More sharing options...
auxilary Posted March 3, 2009 Share Posted March 3, 2009 I'd also like to get this info, as I'm about to rebuilt mine as well. Same scenario Quote Link to comment Share on other sites More sharing options...
Soundmasterg Posted March 3, 2009 Share Posted March 3, 2009 Same scenario for me too. Hopefully someone can find the parts source and post here. Greg Quote Link to comment Share on other sites More sharing options...
Xnke Posted March 4, 2009 Share Posted March 4, 2009 Do a search and you will find that the first deep groove ball bearing is NLA from ANYONE, but a usable replacement can be got from Nissan. NZeder came up with the Nissan part number, Hopefully he'll chime in. As far as the rest of the bearings and seals, your nissan dealer or very likely, subaru dealer will have a list of parts. if the bearings are readable, you can get the ABEC numbers off of them, something that looks like "6088" or "6082ZS" or similar. As far as seals, i dunno. Quote Link to comment Share on other sites More sharing options...
reddzx Posted March 4, 2009 Author Share Posted March 4, 2009 I just checked Rockauto.com and they have the 87-89 300ZX Turbo R200 CLSD bearings and seals listed as: Pinion bearing, outer .....BCA 32306C $31 Pinion bearing, inner .....BCA 32307 $44 Pinion seal..................... .BCA 2011 $9.75 Diff. side bearing, (2).... .BCA 30209 $45 Diff side Oil Seal, (2)..... .BCA 223542 $5.24 Cover gasket....................RD S27275 $3.33 Quote Link to comment Share on other sites More sharing options...
m1noel Posted March 4, 2009 Share Posted March 4, 2009 The front pinion bearing may be available through Zspecialties.com. That is where I got mine a couple of month's ago. All of the others were available through Nissan, NAPA, and Car Quest. Mike Quote Link to comment Share on other sites More sharing options...
reddzx Posted March 5, 2009 Author Share Posted March 5, 2009 These are all the parts needed with the numbers off the nissan fiche. [38440] DIFFERENTIAL SIDE BEARING, (2) [38342] DIFFERENTIAL SIDE OIL SEAL, (2) [38140] DRIVE PINION BEARING, FRONT (1) [38335] BALL BEARING, FRONT (1) [38120] DRIVE PINION BEARING, REAR, (1) [38189] DRIVE PINION OIL SEAL, (1) Quote Link to comment Share on other sites More sharing options...
zcarnut Posted March 5, 2009 Share Posted March 5, 2009 Do a search and you will find that the first deep groove ball bearing is NLA from ANYONE, but a usable replacement can be got from Nissan. . The front pinion bearing is available through Nissan as a 38335-N3220. It is the correct original OEM bearing. I just got one last month from my local dealer. Quote Link to comment Share on other sites More sharing options...
Silli Posted March 12, 2012 Share Posted March 12, 2012 (edited) I run to dead end trying to find parts for overhauling R200 lsd. Doesn´t make it any easier living in finland. Hope some of you guys can help or point the way to those parts listed below. -2 pcs 38436-N3210 spring disk 1.75mm -2 pcs 38432-N9000 friction plate How it will work if I chim it together without those parts ? There will be then atleast only half of spring pressure to disks ? Any help appreciated, now having most expensive 80 lbs pile of.... without those parts. Regards Silli Edited March 12, 2012 by Silli Quote Link to comment Share on other sites More sharing options...
VegasZ31T Posted June 7, 2012 Share Posted June 7, 2012 (edited) I have a 5/87 300ZX turbo with the CLSD R200. I have a set of 6 new clutches I got from Savage42 to use but I would like to find a source for bearings and seals. Does anyone have a parts list for this rebuild? I was told to check here for maybe a non Nissan/dealership parts source. Perhaps this will help: http://www.nissanpartszone.com Edited June 7, 2012 by VegasZ31T Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.