Koss Posted March 31, 2011 Share Posted March 31, 2011 You make your build threads very visual with all the pictures. Makes for an interesting read. Love the car, and keep it up! Quote Link to comment Share on other sites More sharing options...
wagon jon Posted April 1, 2011 Share Posted April 1, 2011 Looking through this build is quite inspiring. How long do you think that JB Weld will hold? Quote Link to comment Share on other sites More sharing options...
GOTHALOSISM Posted April 29, 2011 Share Posted April 29, 2011 Beautiful build, quick question though. That Personal steering wheel that you got off ebay, if you dont mind how much was it? I found the exact same one in a JY with the hub adapter and the Datsun horn button for $10. I grabbed it since I had never seen one before, I might end up keeping it but I sort of like my Carrol Shebly steering wheel that I have on now. Quote Link to comment Share on other sites More sharing options...
crazyoctopus Posted May 6, 2011 Author Share Posted May 6, 2011 wagon jon - maybe 3 start ups? hahah really i have no idea. at this point i am hoping that it will last long enough so that I can do some testing to make sure everything works. if it doesnt hold at all it is just a quick run to the yard or I have a guy that sells good blocks. Gothalosism - $80 shipped to my door if i remember correctly. ps. i hate you for finding one in the yard. I should have some updates soon, I just have been dealing with a new job and moving so i haven't had mush time to devote to the car. Quote Link to comment Share on other sites More sharing options...
GOTHALOSISM Posted May 8, 2011 Share Posted May 8, 2011 Thanx, all i need to find in a yard now is an OEM g-nose... /Fingers crossed Quote Link to comment Share on other sites More sharing options...
LegnaZetr0 Posted May 14, 2011 Share Posted May 14, 2011 very unique swap. Cant wait to see a driving vid. Quote Link to comment Share on other sites More sharing options...
crazyoctopus Posted May 15, 2011 Author Share Posted May 15, 2011 me too! haha Quote Link to comment Share on other sites More sharing options...
ShakotanLife Posted May 30, 2011 Share Posted May 30, 2011 man I just saw that your in fallbrook. Im in temecula... I have been watching this project since day one. I would love to come by and check it out. Even if it its in super project mode. Quote Link to comment Share on other sites More sharing options...
datsun723 Posted May 30, 2011 Share Posted May 30, 2011 man I just saw that your in fallbrook. Im in temecula... I have been watching this project since day one. I would love to come by and check it out. Even if it its in super project mode. Seems there's a couple of us pretty local to one another. Any updates crazy? Quote Link to comment Share on other sites More sharing options...
boardkid280z Posted June 5, 2011 Share Posted June 5, 2011 Cool build. Any big issues with the practicality of a slammed car? It just seems like you have to drive a lot slower most places to avoid bottoming out and damaging something. I like the powerplant. What's the displacement on that motor? What's the driveshaft setup going to be? Do you plan to race it or autocross it or anything or will it just be a street car? DD? Quote Link to comment Share on other sites More sharing options...
Guest Seventy-six-s30 Posted June 29, 2011 Share Posted June 29, 2011 I love your build it inspired mine. i always love that flat colored pain on the z's it brings out that classic beast look. Quote Link to comment Share on other sites More sharing options...
crazyoctopus Posted July 18, 2011 Author Share Posted July 18, 2011 datsun723 - Sure sounds good, I am in town after 6pm on the week days and there usually on the weekeds, send me a PM and we will plan it all out. boredkid280z - No real issues with a slammed car, just lots of crawling over speed bumps or complete avoidance. the displacement is 2.4l just like a KA, and I am going to use the stock 240z driveshift cut down about an inch or so. The plan is to daily drive it, but I will still be using it in the mountains as well as on road courses whenever I have a chance. =============== time for a bit of an update ================ It has been too long since I have actually done any wiring on a car, and I never was really that good at it to begin with, but I have finally gotten around to tackling the chassis. With the wiring diagram that I created on the screen I started connecting everything to the relay and fuse box. wiring by crazyoctopus, on Flickr Drilled out my switch panel as well as my instrument panel and mounted what I needed to mount. wiring by crazyoctopus, on Flickr wiring by crazyoctopus, on Flickr wiring by crazyoctopus, on Flickr --This is not the final look of the panels, they will be covered with some fabric so that it doesn't blind me while I am driving.-- I am pretty stoked about how it turned out, and once it was all ready I started testing. At that moment I was no longer stoked about it... Nothing worked, absolutely nothing. I kept trying different things and checking grounds but nothing was working. The relays were clicking, but none of the lights turned on. So after about 5 more minutes I called it a weekend and started to let the vodka+ flow. During this time of intoxication I started to think about how I wired up the relays. I went everywhere on the internets with a diagram as to how ground switch relays are wired I found out that I was correct in what I did. However, what I did do wrong was mirror where the wires go to... yeah... I'm that guy. Somewhere down the line my numbers got switched around: my layout translated from the Nissan numbers 30(1) --ooo-- 87(2) 85(3) __/ -- 86(5) =====WHAT IT SHOULD HAVE BEEN==== 86(1) --ooo--85(2) 30(3) __/ -- 87(5) So yeah... the visual diagram that I put at the bottom of the page is correct, just the Nissan numbers that I associated with it were wrong. I should have double checked but I figured that after 15 revisions it would be good. Oh well such is life, and it isn't that big of a deal to re-plug everything back together. And that is my plan for this week, that way I have the whole weekend to make a transmission mount and hopefully start on the engine wiring harness, but I may save that for the very last thing that I do. Quote Link to comment Share on other sites More sharing options...
crazyoctopus Posted July 25, 2011 Author Share Posted July 25, 2011 Part swapped my MSA 2.5" header back exhaust for an intercooler with a friend of mine GodSpeed super by crazyoctopus, on Flickr Mouth full by crazyoctopus, on Flickr wweeeeeeeee Quote Link to comment Share on other sites More sharing options...
crazyoctopus Posted August 8, 2011 Author Share Posted August 8, 2011 A bit of an update... A couple weekends ago I finally got around to rewiring the relays and started testing the whole harness to make sure that everything worked... It did Headlights by crazyoctopus, on Flickr Due to that awesome bust of happiness, and actually getting visual progress, I had a new found rush of working on my car again. As such I worked on my car on Saturday with the hope that I would be able to make a transmission mount as well as see how much I had to cut off of my driveshaft to make it fit. But before any of that could be done we had to get some sim racing in back with a force by crazyoctopus, on Flickr The next morning I made a quick run to the hardware store and picked up the required metal, bolts, and nuts. After a short bit of hammering, heating, and drilling I created a transmission mount. After final fit was done on the chassis I made a couple more holes into the chassis and bolted it all up. transmission in! by crazyoctopus, on Flickr Now it was time to see how much I was either going to have to cut off or add to the driveshaft to make it work... So I bolted in the driveshaft... bolted in driveshaft for fitment by crazyoctopus, on Flickr And BOOM!!! YESSS!!! PERFECT!!! WWWOOOOO!!!!!! by crazyoctopus, on Flickr Seriously only about 1/16" from being where it was from the factory! Soooooo incredible. Now all that is needed is to find a U-joint that will convert the Datsun size to the Mustang size and I will be golden! This week will be spend re-researching what I will need to finish the car and hopefully within the month I will be finished; actually I want to be finished by the 26th so that I can enter into open header night and roll around town being ******* loud, but we will see if that is actually possible Quote Link to comment Share on other sites More sharing options...
Fuzzydicerule Posted August 9, 2011 Share Posted August 9, 2011 you play GT5 with that G25 wheel? i built a similar rig for mine recently, that **** is the most fun. Quote Link to comment Share on other sites More sharing options...
BluDestiny Posted December 13, 2011 Share Posted December 13, 2011 Updates? Quote Link to comment Share on other sites More sharing options...
GOTHALOSISM Posted December 15, 2011 Share Posted December 15, 2011 Just noticed your SW its different than the one I have. Quote Link to comment Share on other sites More sharing options...
crazyoctopus Posted January 20, 2012 Author Share Posted January 20, 2012 updates will be coming soon I have been slammed with work and life and now that I have all of them in check i'll be getting back to the car, this weekend i'll be doing the simple thing of bolting on the flywheel, clutch, & pressure plate then reinstalling the engine and tranny to start up the wiring of the engine. hopefully by the time that my hydro throwout bearing comes in all i will have to do is pop the tranny out and slide it it to get it on the road again! Quote Link to comment Share on other sites More sharing options...
sq_creations Posted January 20, 2012 Share Posted January 20, 2012 I saw your car on facebook. Stance Nation's page. http://a7.sphotos.ak.fbcdn.net/hphotos-ak-snc7/s720x720/398089_302599019790391_106576446059317_905571_945841442_n.jpg Your famous. Quote Link to comment Share on other sites More sharing options...
docaam Posted February 7, 2012 Share Posted February 7, 2012 Amazing built, subscribing for the final results Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.