Tim240z

Where is the rust? Tim

Georgia huh? Don't you boys 'tar and feather' down there?! Tim

Never heard of that before. Don't even think it's possible, unless the cam gear came loose? Tim

Hmmmm.oil up there huh? Maybe it's time we bomb their @sses then Sorry bad political humour! Tim

Everyone needs to go into any one of the forums and read the sticky on "HybridZ rules and guidelines". Now that these have been posted, there is no excuse for this type of behaviour on this board, and now that the rules are out there, everyone is warned that the moderators and administrators of this site will enforce them strictly. There has been too much of this nonsense lately and it makes it unpleasant for everyone. "Three strike" rule is in effect. Tim

My machinist made one up for the 3.5 inch downpipe. Here is a pic: Tim

RacerX (and I appologize for highjacking this post), Is there a product that has less viscosity than Aircraft stripper that one could dip parts in (leave over night if necessary) that will clean paint off of smaller parts, like hood hinges etc. Maybe some muriatic acid or something? Thanks, Tim

Try this reading: http://sfgate.com/cgi-bin/article.cgi?file=/chronicle/archive/2003/06/22/IN227179.DTL http://www.recallgraydavis.com/ Tim

Most States have a Kit-Car, or 'remanufactured' vehicle status for registration purposes. Call your local Motor Vehicle Department office (or AAA if you're a member) and get the skinny. Tim

Thanks for the tip! I don't see any mention of the LT1 covers with the 'cutout', but I will call them to see. That's real local for me, from work anyway. Tim

http://www.atlinc.com/racing/accessories.htm http://www.atlinc.com/racing/level.pdf Tim

yes, but you will have to buy the 'canister' type sender. Tim

What about renting a storage space for the boat, or the T/A? It will mean maybe $50 a month extra...... You just got married and already scared of rocking the boat? Hmmmm......surely she knows of your passion for cars, and agreed to put up with it by marrying you? Seems like a rocky beginning..... Tim

Put it this way....if Gray Davis wanted to pick his nose, he would have to stick his finger up his @$$!! Tim

Alex, If you are planning to split the tank, then why not weld in a reservoir inside the tanks with baffles and one way trap doors with the pickup inside the 'box'. That should work very well.. Tim

Most fuel cells (since they are mainly for racing roundy round) have sumps as an integral part of the cell. Although, unless you have the foam (which I don't), you should plan on keeping your tank at least 1/4 full to prevent starvation. Tim

Yeah, what Dave said!!!! :malebitchslap: Tim

Thanks for the suggestions guys!! I just got off the phone with Earthlink and ordered their cable service (no TV signal required, or paid for). So for free installation, and $29.95 per month< I'll finally have high speed access at home, plus 8 email accounts with 10MB of webspace per email address!! What I can't understand: Doesn't the cable company realise that they are losing $$$ by forcing consumers to purchase thier TV package to be able to then pay extra for the high speed internet connection? I mean, for crying out load, Earthlink is using the Cable Company's cable, the Cable Co. is providing the installation, and the billing comes from the Cable Co.!!! Seems like someone at the Cable Co (Time Warner) must have their Head up their @ss!! Again thanks.... John C. strikes again!! Tim

I need something for home. At this point DSL is still not available in my area...Why that is, in the 21st century, I don't know.....it's not like I live in the sticks or anything.....200 of the Fortune 500 Companies are based in my town! Anyway, I digress: I don't have cable....and I won't pay the rip-off subscription rates either, so cable modem is not an option. We are embarking on an addition to the house (w/ a second floor), and I was considering satellite (Direct TV), then I could use satellite ISP service, but I don't want to do that until the addition is done, for obvious reasons. Anyone have any recommendations on dialup ISP service? Are any of the 'free' ISP services any good for the interim? If not, what is the cheapest, reasonable (functionality/useability) service out there? Thanks, Tim

Don't buy the kits....the instal is so easy with some basic wiring, that the expense of the kit IS NOT warranted. Tim

You may find the toggle switch solution to be a PITA because you will always have to remember to switch it off when coming to a stop otherwise the car will stall. Give Bowtie Overdrives a call!!! They will point you in the right direction. Here, I'll make it easy for you: http://www.bowtieoverdrives.com/ 760/947-5240 Tim

Thanks Dan!! I was looking at similar units on ebay, but I really wanted a nice set of customized engraved aluminum ones, but the engraving shop won't do anything but their own covers, so I can't buy a set and send them. I guess I will have to settle for now.... Tim

Jeremy, have you checked the balance of your rear wheels? Tim