Jump to content
HybridZ

RB26powered74zcar

Super Moderators
 View Profile  See their activity

  • Posts

    4651

  • Joined

  • Last visited

  • Days Won

    23

 Content Type 

Everything posted by RB26powered74zcar

  1. RB26powered74zcar
    " They claim that the RB26 tranny is much stronger than the RB25 tranny " BS.... the trans are the same inside (except for the transfer case). (DETT VRS DET trans)
  2. RB26powered74zcar
    Check out this forum for Z32/RB's http://rbz32.com/forums/index.php?sid=2e06acda258e7a1c429a52e381e8bc29
  3. RB26powered74zcar
    I agree with above two posts. Blake is a honest seller.... add him to your favorite seller watches...
  4. RB26powered74zcar
    He mentions it above in post #87 " The axle prices below include us disassembling your donor CV's and axles and installing them on our new axles. "
  5. RB26powered74zcar
    thanks
  6. RB26powered74zcar
    Thats what I hear....
  7. RB26powered74zcar
    Here is a couple LHD new GT-R's >>
  8. RB26powered74zcar
    I heard that to, but I don't think thats what I heard. I believe its the rev limiter hitting the max as the torque converter is slipping briefly... Thats just my opinion though, as thats what it sounds like to me.
  9. RB26powered74zcar
    There is, to a certin extent.... see the click able pull down menu choices in the upper right side corner of the page , opposite the Post Reply? it says Display Modes, pull down that menu and choose Hybrid Mode, that will give you alot more posts in a row... I hope that is what you looking for....
  10. RB26powered74zcar
    The CV's I have that came off a R31 has the 4 bolt flange that mates to the wheel side flange. Mine measure 21" 20 3/4" measurement taken with shafts in the natural extended position, just lying on the work bench. Measured from flat surface that mates to companion flange, to the tip of the splined stub shaft that goes inside the diff. I did not try to measure them in the compressed position...
  11. RB26powered74zcar
    I have a pair of each in my shop. I will measure them tomorrow (Sun.) and report the findings here....
  12. RB26powered74zcar
    I hope I don't run into any issues with my pair I have suppling my fuel needs to the RB. I have read/heard of Walbro pumps giving up the ghost, but not really any more frequently than other brands I suppose.... I dunno, I'm not going to flame on them yet, mainly cause mine are holding up just fine (so far ).
  13. RB26powered74zcar
    I noticed that this a.m., but was not sure if that was something new that had just happened.... either way... props to you RT !!
  14. RB26powered74zcar
    Very nice, but a re-post ....
  15. RB26powered74zcar
    Well thats good news to hear. I was one of the first to get excited about the news of this product coming out. I guess I should have called him instead of waiting on a response to the PM I sent him... Please tell him of the interest here Rick, and update us on your results.
  16. RB26powered74zcar
    Smooooth ....
  17. RB26powered74zcar
    I wouldn't.... the author of this thread hasn't even been monitoring the interest. As of today, he hasn't been on HybridZ since Aug 3rd.
  18. RB26powered74zcar
    Sounds like it means business.... very impressive Rob !!
  19. RB26powered74zcar
    Awesome ride Rick !!! judging by the threads title, are You tootin the horn, saying look at my new bada$$ daily driver... ? just checking....
  20. RB26powered74zcar
    Looking very impressive Mull !!! I did not know there was a 4 lug skyline. Am I seeing this correctly? I have a 89 GT-R rear drop and its pretty beefie (pretty much the same as the Z32, except it uses a R200 CLSD with the same axles as the Z32) EDIT*** I read thru other post and determined I must have not got it right. You must be using some parts from models other than the skyline also.... that explains the 4 lug. Sorry
  21. RB26powered74zcar
    I like it !! I have a brand spanking new one of those up in my attic, but haven't brought myself around to installing it. I really like your seats too.... whats the origin?
  22. RB26powered74zcar
    niceguy678us is correct. How do I know? I have a early 74 260z, and it has the same exact tail lights as the 280z. 70 - 73 240 tail lights are the same. 74 260 - 78 280 are the same. Thats U.S. spec of course....
  23. RB26powered74zcar
    Well, here you go guys.... to all the ones posting " wish I could buy a pair of those mounts " or " anybody know how to get a pair of the Rick Wong mounts " this is your chance !! I have a set in my Z. If you want the best... forget the rest....
  24. RB26powered74zcar
    You've done a very nice job Yasin. Can't wait to see her installed !! Keep the pics flowing.....
  25. RB26powered74zcar
    Oh my God!! You best research that name (Osaka) before you piss your money in the wind with those crooks!! I know from first hand experience....
×
×
  • Create New...