PR280z

I just remembered i do have a junk parts car out in the woods some where. I`ll check to see the condition they are in and send you some pics. Will let you know!

Buddy, Have you ever check EBAY? I found one on ebay,yes the whole section from the rear all the way to the front tip. Brand spanking NEW! YES! I paid a pretty penny for it but i have it boxed and stored for if i ever do need it. You never know what type of an accident you`ll find yourself in. By the way there is a person here on this site that i highly recommend for all z related parts. He sure help me keep my Z alive and that's 1NONLYZ out in NEW MEXICO! Try to get in touch with him. GOOD LUCK!

Would it create a rust trap in between the surface and rubber?

How about lowering it a little more? I`m sure you luv it when you come along those those speed bumps.

To all in the east coast,get ready and start the preparations need to get through this storm safely. We got a lot of rain here in Puerto Rico,but She was only beginning category #1. Now She`s much stronger! Take care of yourselves and the family and of course the ZZZZZZZZZZZZZZZ !

Thankz, that`s my 315hp ZETTO BASTARD! Now! for the zx2+2,my plans are to install the L28ET i have under the blue cover behind the car. Giving the Z a break and use the ZX as the daily driver.

RUST! Well that`s not to bad compared to my 79/280ZX/2+2 project. You have some nice goals for your ZX(3.7L).KEEP US POSTED. http://www.youtube.com/watch?v=GBfdUo7DNEw

Those little windows help to see the BLIND SPOTS with a quick glance over your shoulders.

If the the paint shows hairlike cracks,it`s better to sand to the metal. Applying bondo and then paint over it will not fix it. The crack will reappear.

WE WANT MORE PICS PLEASE! THANKZZZZZZZZZZZZZZZZ!

OK, guys and gals.I`ll be rounding up all the materials to get this rolling,but the 1st sets would be test fitted on not just one, but all 3 of my zx cars. So depending on the outcome then i would proceed to fab parts for all those ZX fanatics such as myself.

REVERENDZED, I`m sorry i could`nt get to visit you.I`m back on the island, my stay was very short. I did stop by Jim place,DAMN! His cars sure are ZWEET! I understand your problem just might be the carbs,if so,, ever thought about the 3 MIKUNI set up? Well... hope to see it running the next time i`m in town. Will keep in touch.

I`ll PM you when i`m in town. Later! AND REMEMBER, KEEP THE Z ALIVE!

Reverendzed, i just realized your in Wesley Chapel i`ll also be staying at SEVEN OAKS there just before you get to JCPENNY/MALL.Enjoy your new HOME!

Yes, JIM is the guy you want to meet and Z MECCA is the PLACE you want to visit. I`m at least 5-10 minutes from him. And yes, my jaw also hit the floor when i went in to see his ongoing projects.He sure as a passion for the Z! Let me know if you want me to take you there? OK. I just read your post. Good to hear you got in touch with him.

Where are you located in Tampa? I`ll be heading to Lutz/wesley chapal-Tampa in a few weeks for about 2-3 days. I know of a guy who restores Z only out there,great guy!. I`ll be staying in Chaval section in lutz. Every-time i`m in the area i always stop by his place, maybe i can pick you up and we`ll pay him a visit. Let me know cause i`ll probably be out there on the 26 or 27 of june. KEEP THE Z ALIVE!

No difference from out here.It seem all you see out at the drag strips are ROTARIES in these dats, must be because of the weight.

Just the two from the left.The green far right has a MR2 turbo engine and the red one has a SR20Det. Out here in puerto rico it`s common to swap for another engine on these chassis.

All in the family:

40g or wire cup on grinder/drill gun for the bondo removal and 60-100g on DA sander for the paint. GO FOR IT!

the whale tail fits perfectly on the S30, the S130 is a wider car thus the fitment won`t look right.

I`m sure we can work something out.

Keep`em coming!... i`m almost at point to decide.

Here`s another shot next to the wife's rouge.

And for those S30 owners, i also have the WHALE-TAIL MOLD...that i may also fab a few parts. It all depends on the interest/demand for the part.