Jump to content
HybridZ

cobraz240z

Members
 View Profile  See their activity

  • Posts

    204

  • Joined

  • Last visited

 Content Type 

Everything posted by cobraz240z

  1. cobraz240z
    Ok I have a trans from a 1981 280zx and i have a 2+2 flywheel lightend to 16# and the 2+2 clutch I put the through out bearing on the clutch fork but I have heard some thing about the coller is not long enough or 2 short some thinng like that? Any suggestions?
  2. cobraz240z
    hey i like your car can you send me some pics cobraz240@hotmail.com
  3. cobraz240z
    What I did was get a 280z gas tank for my 240z it bolted up perfectly and it was really clean
  4. cobraz240z
    you forgot the magnum part "BMW MV8 magnum-330rx Limited"
  5. cobraz240z
    Ok I bet you that T70 turbo wont last 6 months I had 2 of them on my mustang? Don't buy there products your better off getting used ebay stuff that is a name brand
  6. cobraz240z
    Ok this is a non related datsun questions but now one has been able to help me, I hope some one here would know the answer. Ok I just bought a 1992 mustang for $350 its a 2.3 it is one of those 8 spark plug motors and only the left side has spark both coil pack are good the rpm signal doesn't work I think its the ignition control module but they are $150 and its non refundable and the scaner doesn't say anything any suggestions?
  7. cobraz240z
    http://youtube.com/watch?v=KSVniGAD9cY
  8. cobraz240z
    try puttin the early 240z strut tops i think those should lowerit 2
  9. cobraz240z
    i will post pictures today or tommorrow
  10. cobraz240z
    anybody need parts?
  11. cobraz240z
    ok it has clean doors clean fendors it has no rust in the hatch area just a little in the passenger bottom panel you know that common area clean windows and it has no motor trans rear diff gas tank its a steal to who ever needs body parts
  12. cobraz240z
    I have a T-MAXX I would say they are the best RC for they money have fun
  13. cobraz240z
    Anybody Need Parts 280z Rolling Shell $100 Must Go Quick In Santa Paula Ca 93060 Im About 45 From L.a
  14. cobraz240z
    I Think That Part Is Over Priced, I Think Any Decent Fabricator Could Make One In No More Than 2 Hours I Know I Can At Least. The Other Desings Looked Much Better I THINK THE ONE FASTZCARS POSTED WOULD BE WORTH THE $250 THATS JUST ME
  15. cobraz240z
    I am located in southern california im about 45 min from L.A
  16. cobraz240z
    I have a 1976 280z shell good car for race project missing gas tank motor will trade for a ceramic coated header or first $200 call me at 805-525-2054 805-746-8039 or email me at cobraz240@hotmail.com
  17. cobraz240z
    i have a 280z 1976 solid shell i will be selling for $200 if you want it it is missing some interior panels and gas tank, motor, its a rolling shell you can call me at 805-746-8039 ricardo or email me at cobraz240@hotmail.com
  18. cobraz240z
    ok well the car has spark and the injectors don't pulsate when you crank but the cold start has power i think when it warms up the cold start turns of then engajes the injectors but i don't know what to do
  19. cobraz240z
    ok I have a 280z and i put a new head gasket and i cant get it to start the timing is right on where it needs to be so are the wires any ideas
  20. cobraz240z
    there is a 2+2 in the local auto wrecking im thinking of pulling the trans to get the flywheel and the colar if thats what i need any other suggestions?
  21. cobraz240z
    Ok I have good news and bad news. Good news is that your ready for a turbo and or could run on 70octane hahaha:icon45: The bad news is for just a replacement its not that good you will get 7:52 with a felpro non shaved if you shave the Funk out of it you might get 8:1 I would get a N47 head from a maxima put the big valves shave it a bit and you will get about 9.5:1 I think some where around there give or take a little
  22. cobraz240z
    I got a r200 diff from a 85 turbo 300zx im not going to be using it so ill set for cheap or trade for a header
  23. cobraz240z
    ok I need a clutch for a 1970 240z I want it to be better than stock but not to agressive I was told that the pressure plate of a nissan truck would work but they did not mention the year or model should I use a stock 82 turbo clutch with a 2+2 flywheel I plan to have about 170hp to the wheels
  24. cobraz240z
    all msd come with a carb # sticker good thing I drive a 70 z don't need smog lol
  25. cobraz240z
    thanks I apreciate it.
×
×
  • Create New...